ศิลปะ
ความงามและสุขภาพ
งานฝีมือ
วัฒนธรรมและประวัติศาสตร์
ความบันเทิง
สิ่งแวดล้อม
อาหารและเครื่องดื่ม
วิศวกรรมย้อนรอย
วิทยาศาสตร์
กีฬา
เทคโนโลยี
อุปกรณ์สวมใส่

Teapot: a Tinplate Picnic Teapot with Cock and Strainer (Hasluck, 1907)
A square tinplate teapot from a picnic outfit: folded from one blank, with a hinged lid, and a cock at the bottom behind a perforated strainer that holds back the leaves.
Blank 1 ft 4 1/4 in by 1 ft 0 3/8 in; lid 4 1/8 by 4 in.
Source: Paul N. Hasluck, Tinplate Work (1907), pp. 37-39. Unknown: folding order, solder, the cock. Picture: Figs. 96-97 of the book.
ระดับกลาง
Unknown
คำแนะนำ
1
1
Cut the body blank
Cut the body blank
Cut a piece of tin 1 ft 4 1/4 in long by 1 ft 0 3/8 in wide and mark the pattern of Fig. 96 on it, with the hole for the cock tube. Not given: the folding order. Ours: bend it up on the dotted lines and solder the seams.
วัสดุสำหรับขั้นตอนนี้:
แผ่นเหล็กชุบดีบุก1 body
ตะกั่วบัดกรีดีบุก-ตะกั่ว1 ชิ้นเครื่องมือที่ต้องใช้:
เหล็กขีด
กรรไกรตัดแผ่นโลหะ
หลัก
ค้อนไม้
หัวแร้งไฟฟ้า
ฟลักซ์2
2
Fit the cock and strainer
Fit the cock and strainer
Solder a tube about 1/2 in long into the hole for the cock (Fig. 97) and fit the cock to it. Develop the strainer (Fig. 98): top curve radius 1 13/16 in, chord corner to corner 2 15/16 in. Perforate it and solder it across the corner in front of the tube (Fig. 99).
วัสดุสำหรับขั้นตอนนี้:
ท่อทองเหลือง1 1/2 in
ก๊อกระบายของเหลว1 ชิ้น
แผ่นเหล็กชุบดีบุก1 strainer
ตะกั่วบัดกรีดีบุก-ตะกั่ว1 ชิ้นเครื่องมือที่ต้องใช้:
วงเวียนปลายแหลมสองขา
กรรไกรตัดแผ่นโลหะ
เครื่องเจาะรูแผ่นโลหะ
ท่อนไม้เนื้อแข็ง
หัวแร้งไฟฟ้า
ฟลักซ์3
3
Make the hinged lid
Make the hinged lid
Cut the lid (Fig. 100) 4 1/8 by 4 in; the inner rectangle 3 1/2 by 3 1/2 in leaves 1/4 in to bend up. Cut hinge projections 1/2 in wide by 5/8 in deep with equal spaces, the outer ones only 1/4 in wide. Bend them round a wire 1/16 in thick. Hasluck adds that the teapot may be enamelled dark green.
วัสดุสำหรับขั้นตอนนี้:
แผ่นเหล็กชุบดีบุก1 lid
ลวดเหล็กดัด1 1/16 inเครื่องมือที่ต้องใช้:
กรรไกรตัดแผ่นโลหะ
หลัก
ค้อนไม้วัสดุ
5- 1 lidตัวยึดตำแหน่ง
- 2 ชิ้นตัวยึดตำแหน่ง
- 1 1/2 inตัวยึดตำแหน่ง
- 1 ชิ้นตัวยึดตำแหน่ง
- 1 1/16 inตัวยึดตำแหน่ง
วัสดุจากพิมพ์เขียวที่เชื่อมต่อ
พิมพ์เขียวนี้สร้าง
CC0 สาธารณสมบัติ
พิมพ์เขียวนี้เผยแพร่ภายใต้ CC0 คุณสามารถคัดลอก แก้ไข แจกจ่าย และใช้งานผลงานนี้เพื่อวัตถุประสงค์ใดก็ได้ โดยไม่ต้องขออนุญาต
สนับสนุนเมกเกอร์โดยซื้อสินค้าผ่านพิมพ์เขียวของพวกเขา ซึ่งพวกเขาจะได้รับ ค่าคอมมิชชันเมกเกอร์ ที่ผู้ขายกำหนด หรือสร้างเวอร์ชันใหม่ของพิมพ์เขียวนี้และรวมเป็นการเชื่อมต่อในพิมพ์เขียวของคุณเพื่อแบ่งรายได้


