ศิลปะ
ความงามและสุขภาพ
งานฝีมือ
วัฒนธรรมและประวัติศาสตร์
ความบันเทิง
สิ่งแวดล้อม
อาหารและเครื่องดื่ม
วิศวกรรมย้อนรอย
วิทยาศาสตร์
กีฬา
เทคโนโลยี
อุปกรณ์สวมใส่
Hand Bellows From a Whole Ram Skin With a Wooden Head and Iron Tube (Theophilus, 12th Century)
Forge

สร้างโดย

Forge

14. พฤศจิกายน 2026NO
10
0
0
0
0

Hand Bellows From a Whole Ram Skin With a Wooden Head and Iron Tube (Theophilus, 12th Century)

The goldsmith's bellows from Theophilus's De Diversis Artibus (12th century): a ram skin stripped off whole through an opening behind, stuffed with straw and dried, cured a day and two nights in lye and salt, stretched, oiled, and fitted with a wooden head and iron tube at the neck, four sticks across the back, and a thumb loop and finger loop to work it.
ระดับกลาง
About 4 days

คำแนะนำ

1

Schedule

กำลังโหลดสมุด Jupyter…
2

Read De Diversis Artibus, Book III

"Then make bellows from the skins of rams, thus: When the rams are killed, the skins must not be cut under the belly, but they are opened behind."
3

Strip and cure the skin

Open the ram's skin behind, not under the belly, and turn it so it strips off whole. Fill it with straw and dry it moderately. Lay it in lye and salt for a day and two nights.

วัสดุสำหรับขั้นตอนนี้:

หนังแกะหนังแกะ1 ชิ้น
ฟางฟาง1 ชิ้น
น้ำด่างขี้เถ้าไม้น้ำด่างขี้เถ้าไม้1 ชิ้น
เกลือเกลือ1 ชิ้น

เครื่องมือที่ต้องใช้:

มีดตัดหนังมีดตัดหนัง
ถังขนาด 20 ลิตรถังขนาด 20 ลิตร
4

Stretch and oil

On the third day stretch it lengthwise, but more in breadth. Anoint it (tallow is our choice) and stretch it again.

วัสดุสำหรับขั้นตอนนี้:

ไขสัตว์ไขสัตว์1 ชิ้น
5

Fit the head and tube

Make a wooden head that passes through the skin's neck and bind it there; bore it for an iron tube (rolled from sheet iron, our method).

วัสดุสำหรับขั้นตอนนี้:

แผ่นไม้เนื้อแข็งแผ่นไม้เนื้อแข็ง1 ชิ้น
แผ่นเหล็ก (ตีด้วยค้อน)แผ่นเหล็ก (ตีด้วยค้อน)1 ชิ้น
เชือกปอกระเจาเชือกปอกระเจา1 ชิ้น

เครื่องมือที่ต้องใช้:

เลื่อยมือเลื่อยมือ
สว่านมือหมุนพร้อมดอกสว่านมือหมุนพร้อมดอก
มีดตัดหนังมีดตัดหนัง
ค้อนค้อน
6

Fit the back and loops

Across the back opening place four pieces of wood: two joined together and fixed in the middle, two sewn onto the skin, so the joins come above and below. Sew on two loops of the same skin, a smaller one above for the thumb and a larger one below for the other four fingers.

วัสดุสำหรับขั้นตอนนี้:

แผ่นไม้เนื้อแข็งแผ่นไม้เนื้อแข็ง1 ชิ้น
ด้ายลินินด้ายลินิน1 ชิ้น

เครื่องมือที่ต้องใช้:

เหล็กหมาด (สว่านเจาะรูมือ)เหล็กหมาด (สว่านเจาะรูมือ)
เข็มเย็บอานม้าสองเล่มเข็มเย็บอานม้าสองเล่ม
มีดตัดหนังมีดตัดหนัง
เลื่อยมือเลื่อยมือ
7

Use

Put the iron tube in the hole of the furnace, lay fire and charcoal at the back and front, and blow, first to dry the new furnace.
8

Troubleshooting

Bellows troubleshooting.

Flow

Loading...
9

History and honest limits

From Theophilus Presbyter, **De Diversis Artibus** (12th century), Book III, chapter IV, translated by Robert Hendrie (1847) (checked on the archive.org scan essayuponvarious00hend, pp. 211-213). He gives no sizes and does not say what the skin is anointed with; tallow, the rolled sheet-iron tube, the tools and the diagram are ours.

วัสดุ

9

เครื่องมือที่จำเป็น

7

บลูพริ้นท์ที่เกี่ยวข้อง

บลูพริ้นท์เหล่านี้แบ่งปันความรู้ — เทคนิค วัสดุ หรือหลักการ

CC0 สาธารณสมบัติ

พิมพ์เขียวนี้เผยแพร่ภายใต้ CC0 คุณสามารถคัดลอก แก้ไข แจกจ่าย และใช้งานผลงานนี้เพื่อวัตถุประสงค์ใดก็ได้ โดยไม่ต้องขออนุญาต

สนับสนุนเมกเกอร์โดยซื้อสินค้าผ่านพิมพ์เขียวของพวกเขา ซึ่งพวกเขาจะได้รับ ค่าคอมมิชชันเมกเกอร์ ที่ผู้ขายกำหนด หรือสร้างเวอร์ชันใหม่ของพิมพ์เขียวนี้และรวมเป็นการเชื่อมต่อในพิมพ์เขียวของคุณเพื่อแบ่งรายได้

การสนทนา

(0)

เข้าสู่ระบบ เพื่อร่วมการสนทนา

กำลังโหลดความคิดเห็น...