ศิลปะ
ความงามและสุขภาพ
งานฝีมือ
วัฒนธรรมและประวัติศาสตร์
ความบันเทิง
สิ่งแวดล้อม
อาหารและเครื่องดื่ม
วิศวกรรมย้อนรอย
วิทยาศาสตร์
กีฬา
เทคโนโลยี
อุปกรณ์สวมใส่

Woven Harvesting Basket: the Square Willow Basket with Bow Handle (Hasluck, 1903)
A sturdy square willow basket with a rope-wrapped bow handle over the open top, for carrying and gathering: the basket-maker's 'grocer's square basket'. Bottom 17 x 11 in, sides 11 in deep to the wale, corner sticks, a foot rim and a handle about 20 in high.
Source: Paul N. Hasluck, Basket Work of All Kinds (1903), pp. 27-47. Picture: Figs. 48-51 of the book.
ขั้นสูง
Unknown
คำแนะนำ
1
1
Weave the bottom in the screw-block
Weave the bottom in the screw-block
Wet the sticks an hour ahead. Cut six sticks 20 in long (3 in extra for the block), the two outside ones thicker. Set the outside pair 11 in apart in the screw-block, the four inside evenly between, thick and thin ends alternating (Fig. 33). Start with two osiers worked together, then weave one rod at a time, butts behind odd sticks, checking the 11 in width with a bent gauge rod and tapping the weave close with the iron, to 17 in long. Lock the end with one long rod (Fig. 34), take it out and pick off the ends.
วัสดุสำหรับขั้นตอนนี้:
กิ่งหลิวขนาดหนากว่า6 20 in
กิ่งหลิว1 weaversเครื่องมือที่ต้องใช้:
น้ำ
กรรไกรใหญ่
กรรไกรตัดแต่งกิ่งแบบมือเดียว
ค้อน
แผ่นไม้แบน2
2
Stake up and fit corner sticks
Stake up and fit corner sticks
Point seventeen pairs of stakes, about half as thick as the sticks: ten for each side, seven for each end. Push the end stakes in beside the sticks; for the sides open holes through the outside sticks with the bodkin. Bend each stake up with the picking knife and gather them in a small hoop (Fig. 35). Cut four corner sticks as thick as the outside bottom sticks, flat-cut at the foot (Fig. 37).
วัสดุสำหรับขั้นตอนนี้:
หลักหลิว34 17 pairs
กิ่งหลิวขนาดหนากว่า4 corner sticksเครื่องมือที่ต้องใช้:
เข็มร้อยริบบิ้น
กรรไกรตัดแต่งกิ่งแบบมือเดียว
ค้อน3
3
Upset and rand the sides
Upset and rand the sides
Upset with three rods (four if there will be no foot rim), working the corner sticks in at each corner (Figs. 38-39), and add a second round. Rand with rods drawn in their lengths, each butt one stake on from the last, to about 10 in deep, keeping the sides upright and true. Leave a space between the two middle stakes of each side the full depth for the handle. Put strainers across when the middle stakes come out of the hoop, and level the weaving at about 9 in.
วัสดุสำหรับขั้นตอนนี้:
กิ่งหลิว1 upsetting, randingเครื่องมือที่ต้องใช้:
ค้อน
เข็มร้อยริบบิ้น4
4
Wale, border and pick
Wale, border and pick
Work a wale of four rods, each behind two stakes and in front of two (Fig. 43), using eight rods, to 11 in deep. Lay the stakes down into the border and finish by cramming (Figs. 45-47). Pick every butt and top inside and out so the outside is smooth.
วัสดุสำหรับขั้นตอนนี้:
กิ่งหลิว8 waleเครื่องมือที่ต้องใช้:
กรรไกรตัดแต่งกิ่งแบบมือเดียว
ค้อน5
5
Add the foot rim
Add the foot rim
Turn the basket over, push a rim stake in beside each stake and each corner stick, upset once round with six rods, tap down and border 'inside two and outside three' (Fig. 49).
วัสดุสำหรับขั้นตอนนี้:
หลักหลิว1 rim stakes
กิ่งหลิว6 upsettingเครื่องมือที่ต้องใช้:
เข็มร้อยริบบิ้น
ค้อน6
6
Fit and wrap the bow handle
Fit and wrap the bow handle
Bend a thick, well-soaked stick into a bow (Fig. 48), push its ends down the handle spaces to the upsetting, about 8 to 9 in above the border (some 20 in from the bottom to the underside of the bow), and shoulder it with the knee. Wrap it with four long smooth osiers, each twisted rope-fashion and lapped round the bow and through under the wale (Figs. 50-51).
วัสดุสำหรับขั้นตอนนี้:
กิ่งหลิวขนาดหนากว่า1 bow
กิ่งหลิว4 handle wrapเครื่องมือที่ต้องใช้:
น้ำ
เข็มร้อยริบบิ้น
กรรไกรตัดแต่งกิ่งแบบมือเดียววัสดุ
3- 1 bowตัวยึดตำแหน่ง
- 4 handle wrapตัวยึดตำแหน่ง
- 1 rim stakesตัวยึดตำแหน่ง
วัสดุจากพิมพ์เขียวที่เชื่อมต่อ
พิมพ์เขียวนี้สร้าง
CC0 สาธารณสมบัติ
พิมพ์เขียวนี้เผยแพร่ภายใต้ CC0 คุณสามารถคัดลอก แก้ไข แจกจ่าย และใช้งานผลงานนี้เพื่อวัตถุประสงค์ใดก็ได้ โดยไม่ต้องขออนุญาต
สนับสนุนเมกเกอร์โดยซื้อสินค้าผ่านพิมพ์เขียวของพวกเขา ซึ่งพวกเขาจะได้รับ ค่าคอมมิชชันเมกเกอร์ ที่ผู้ขายกำหนด หรือสร้างเวอร์ชันใหม่ของพิมพ์เขียวนี้และรวมเป็นการเชื่อมต่อในพิมพ์เขียวของคุณเพื่อแบ่งรายได้


