සහයෝගීතාව
කලාව
රූපලාවණ්‍ය සහ සුවතාව
ශිල්පය
සංස්කෘතිය සහ ඉතිහාසය
විනෝදාස්වාදය
පරිසරය
ආහාර සහ පාන
ප්‍රතිලෝම ඉංජිනේරු
විද්‍යාවන්
ක්‍රීඩා
තාක්ෂණය
පැළඳිය හැකි
Chemical-Resistant Gloves: Butyl Latex over Natural Rubber on a Cotton Liner (Hart & Collyer, US 4,190,685, 1980)
Tex

නිර්මාතෘ

Tex

3. නොවැම්බර් 2026FO
7
0
0
0
0

Chemical-Resistant Gloves: Butyl Latex over Natural Rubber on a Cotton Liner (Hart & Collyer, US 4,190,685, 1980)

Dipped rubber gloves built in layers on a knitted cotton liner: one coat of natural rubber, then five coats of butyl rubber, which lets very little liquid or vapour through. Each coat is dipped from latex on a porcelain hand form, and the whole glove is cured under steam and air pressure. Made in Canada to protect soldiers against chemical warfare agents; worn gloves showed no penetration in 24 hours of field use. Result: flexible, soft chemical-resistant gloves with a comfortable cotton lining. Source: J. A. Hart and J. C. Collyer, US 4,190,685 (1980), latex method. Unknown: sizes, the pigments. Picture: the patent drawing.
උසස්
Unknown

උපදෙස්

1

Sew the cotton liner

Cut knitted or interlock cotton fabric to a glove shape and sew it into a glove. It stretches both ways, soaks up sweat and makes the glove easy to put on and take off. Not given: sizes, the knit.

මෙම පියවර සඳහා ද්‍රව්‍ය:

ගෙතූ කපු රෙදිගෙතූ කපු රෙදි1 liner

අවශ්‍ය මෙවලම්:

කතුරකතුර
මැහුම් යන්ත්‍රයමැහුම් යන්ත්‍රය
නොදන්නා මිනුම්නොදන්නා මිනුම්
2

Dip in coagulant

Pull the liner onto a porcelain hand form and flame it to smooth off the surface. Dip it in a 10 % solution of acetic acid in acetone, then turn the form for about 2½ minutes at 24 °C until it is dry. The coagulant sets the latex before it can soak through the cloth.

මෙම පියවර සඳහා ද්‍රව්‍ය:

ඇසිටික් අම්ලය (ග්ලැසියල්)ඇසිටික් අම්ලය (ග්ලැසියල්)1 10 % in acetone
ඇසිටෝන්ඇසිටෝන්1 solvent

අවශ්‍ය මෙවලම්:

අත්වැසුම් අච්චුවඅත්වැසුම් අච්චුව
ප්‍රොපේන් පන්දමප්‍රොපේන් පන්දම
3

Dip the natural rubber coat

Dip the liner into natural rubber latex (the patent uses LOTOL 1185) and leave it 5 seconds. Draw it out, turn it upside down and let it dry. Scrub the rubber film with an abrasive cleaner, a brush and water, and dry it again.

මෙම පියවර සඳහා ද්‍රව්‍ය:

ස්වාභාවික රබර් කිරිස්වාභාවික රබර් කිරි1 bath
උල්ෙලඛ පිරිසිදුකාරකයඋල්ෙලඛ පිරිසිදුකාරකය1 as needed

අවශ්‍ය මෙවලම්:

අත්වැසුම් අච්චුවඅත්වැසුම් අච්චුව
ඔරවන බුරුසුවඔරවන බුරුසුව
4

Mix the butyl latex bath

Mix, in parts by dry weight: butyl rubber latex 100, sulphur 3, zinc dibutyldithiocarbamate 4, zinc oxide 5, formaldehyde 0.1 as a preservative, a liquid dithiocarbamate curing accelerator 4 (Merac 255 in the patent), and 6.5 of pigments (olive drab in the patent). Not given: the pigments.

මෙම පියවර සඳහා ද්‍රව්‍ය:

බියුටයිල් රබර් කිරිබියුටයිල් රබර් කිරි100 parts dry
ගෙන්දගම්ගෙන්දගම්3 parts
සින්ක් ඩයිබියුටයිල්ඩයිතයෝකාබමේට්සින්ක් ඩයිබියුටයිල්ඩයිතයෝකාබමේට්4 parts
සින්ක් ඔක්සයිඩ් කුඩුසින්ක් ඔක්සයිඩ් කුඩු5 parts
ෆෝමල්ඩිහයිඩ් ද්‍රාවණය (සියයට 37 ෆෝමලින්)ෆෝමල්ඩිහයිඩ් ද්‍රාවණය (සියයට 37 ෆෝමලින්)0.1 parts formaldehyde
දියර ඩයිතයෝකාබමේට් ත්වරකයදියර ඩයිතයෝකාබමේට් ත්වරකය4 parts
නොදන්නා ද්‍රව්‍යයනොදන්නා ද්‍රව්‍යය6.5 parts pigment

අවශ්‍ය මෙවලම්:

කලතන උපකරණයකලතන උපකරණය
5

Dip five butyl coats

Dip the glove into the butyl latex and draw it out at 10 cm per minute. At once turn the form at about 8 rpm at 24 °C until the film has gelled, then dry it upside down in an oven at 66 °C for 1 hour. Wash, dip and dry again until there are five butyl coats; do not use the abrasive cleaner on the butyl film.

අවශ්‍ය මෙවලම්:

අත්වැසුම් අච්චුවඅත්වැසුම් අච්චුව
වේළන උදුනවේළන උදුන
6

Cure and finish

Dry the glove at 66 °C for 1 hour. Cure it for 3 hours in a pressure vessel with 30 psi steam in the jacket (131 °C) and 26 psi air in the chamber. Strip the gloves from the forms while hot; when cool, trim them and wash them in soapy water.

මෙම පියවර සඳහා ද්‍රව්‍ය:

සබන්සබන්1 as needed

අවශ්‍ය මෙවලම්:

මේස ඔටෝක්ලේවයමේස ඔටෝක්ලේවය
කතුරකතුර

ද්‍රව්‍ය

13

අවශ්‍ය මෙවලම්

9

CC0 පොදු වසම

මෙම බ්ලූප්‍රින්ට් CC0 යටතේ නිකුත් කර ඇත. ඔබට අවසර නොමැතිව පිටපත් කිරීම, වෙනස් කිරීම, බෙදා හැරීම සහ භාවිතා කිරීම කළ හැක.

බ්ලූප්‍රින්ට් හරහා නිෂ්පාදන මිලදී ගැනීමෙන් නිර්මාතෘට සහාය වන්න නිර්මාතෘ කොමිසම විකුණුම්කරුවන් විසින් නියම කළ, හෝ මෙම බ්ලූප්‍රින්ට්හි නව අනුවාදයක් සාදා ආදායම බෙදා ගැනීමට ඔබේ බ්ලූප්‍රින්ට්හි සම්බන්ධතාවයක් ලෙස ඇතුළත් කරන්න.

සාකච්ඡාව

(0)

පිවිසෙන්න සාකච්ඡාවට එක්වීමට

අදහස් පූරණය කරමින්...