කලාව
රූපලාවණ්‍ය සහ සුවතාව
ශිල්පය
සංස්කෘතිය සහ ඉතිහාසය
විනෝදාස්වාදය
පරිසරය
ආහාර සහ පාන
ප්‍රතිලෝම ඉංජිනේරු
විද්‍යාවන්
ක්‍රීඩා
තාක්ෂණය
පැළඳිය හැකි
Glass Retort: a Blown Bulb with a Long Neck Bent Down
Bubbles

නිර්මාතෘ

Bubbles

14. ඔක්තෝබර් 2026IT
15
0
0
0
0

Glass Retort: a Blown Bulb with a Long Neck Bent Down

A retort is the old distilling vessel: a round glass bulb whose long neck bends down to a receiver, so the neck itself condenses the vapour. Alchemists used it, and so did Lavoisier and Berzelius before condensers. Blow a bulb on a long tube, bend the tube down in a wide flame, and add a corked filling hole on top. The picture: a mid-19th-century glass retort with a stoppered filling hole (Wellcome Collection).
උසස්
Two hours, plus annealing

උපදෙස්

1

Blow the bulb on a long tube

Close one end of a long tube, gather glass and blow a round bulb, as for a flask. Keep the rest of the tube full length for the neck.

මෙම පියවර සඳහා ද්‍රව්‍ය:

වීදුරු නල කට්ටලයවීදුරු නල කට්ටලය1 කැබැල්ල

අවශ්‍ය මෙවලම්:

මේස වීදුරු පිඹීමේ පන්දමමේස වීදුරු පිඹීමේ පන්දම
ආරක්ෂිත කණ්ණාඩිආරක්ෂිත කණ්ණාඩි
තාපයට ඔරොත්තු දෙන අත්වැසුම්තාපයට ඔරොත්තු දෙන අත්වැසුම්
2

Bend the neck down

Warm a long stretch of the tube just past the bulb in a wide, soft flame, turning it, until it bends under its own weight. Bend it smoothly so the neck slopes down at a sharp angle, without kinking.

අවශ්‍ය මෙවලම්:

මේස වීදුරු පිඹීමේ පන්දමමේස වීදුරු පිඹීමේ පන්දම
තාපයට ඔරොත්තු දෙන අත්වැසුම්තාපයට ඔරොත්තු දෙන අත්වැසුම්
3

Filling hole

Heat a spot on the top of the bulb, blow it out into a small bubble, break it off and open it into a short collar with the jacks for a cork.

අවශ්‍ය මෙවලම්:

මේස වීදුරු පිඹීමේ පන්දමමේස වීදුරු පිඹීමේ පන්දම
Jacks (වීදුරු කර්මාන්තකරුගේ අඬු)Jacks (වීදුරු කර්මාන්තකරුගේ අඬු)
කෝක් ඇණකෝක් ඇණ
4

Cut and anneal

Cut the neck end square, fire-polish it, and anneal the retort in the kiln, cooling slowly.

අවශ්‍ය මෙවලම්:

දියමන්ති සලකුණු කටුවදියමන්ති සලකුණු කටුව
මේස වීදුරු පිඹීමේ පන්දමමේස වීදුරු පිඹීමේ පන්දම
පිළිස්සුම් උදුනපිළිස්සුම් උදුන
5

Neck length for cooling

Jupyter සටහන් පොත පූරණය වෙමින්…

ද්‍රව්‍ය

1

අවශ්‍ය මෙවලම්

7

මෙම සැලසුම සාදන්නේ

සම්බන්ධ බ්ලූප්‍රින්ට්

මෙම බ්ලූප්‍රින්ට් දැනුම බෙදා ගනී — ශිල්ප ක්‍රම, ද්‍රව්‍ය හෝ මූලධර්ම

CC0 පොදු වසම

මෙම බ්ලූප්‍රින්ට් CC0 යටතේ නිකුත් කර ඇත. ඔබට අවසර නොමැතිව පිටපත් කිරීම, වෙනස් කිරීම, බෙදා හැරීම සහ භාවිතා කිරීම කළ හැක.

බ්ලූප්‍රින්ට් හරහා නිෂ්පාදන මිලදී ගැනීමෙන් නිර්මාතෘට සහාය වන්න නිර්මාතෘ කොමිසම විකුණුම්කරුවන් විසින් නියම කළ, හෝ මෙම බ්ලූප්‍රින්ට්හි නව අනුවාදයක් සාදා ආදායම බෙදා ගැනීමට ඔබේ බ්ලූප්‍රින්ට්හි සම්බන්ධතාවයක් ලෙස ඇතුළත් කරන්න.

සාකච්ඡාව

(0)

පිවිසෙන්න සාකච්ඡාවට එක්වීමට

අදහස් පූරණය කරමින්...