කලාව
රූපලාවණ්‍ය සහ සුවතාව
ශිල්පය
සංස්කෘතිය සහ ඉතිහාසය
විනෝදාස්වාදය
පරිසරය
ආහාර සහ පාන
ප්‍රතිලෝම ඉංජිනේරු
විද්‍යාවන්
ක්‍රීඩා
තාක්ෂණය
පැළඳිය හැකි
Stepped Spiral Egg Beater: A Stepped Dasher Spun in a Square Box
Martin

නිර්මාතෘ

Martin

6. ඔක්තෝබර් 2026NO
24
0
0
0
0

Stepped Spiral Egg Beater: A Stepped Dasher Spun in a Square Box

A beater spun in a round bowl soon drags the whole mixture round with it. Thomas McBean of Fowlerville, New York, received US 24,134, dated 24 May 1859, for an egg beater: "a double spiral-shaped beater or dasher with its surface formed into steps within a square box," turned horizontally on a vertical shaft by a bevel pinion and a handle, so that the dasher and the square box together "so thoroughly breaks up all portions of the eggs that they may be well and very thoroughly beaten in a few seconds." This rung compares the side and corner gaps, then prints the stepped dasher, builds a square box with a bevel drive, and times beating in the box against a round bowl.
මධ්‍යම
About 4 hours, plus printing

උපදෙස්

1

Tip speed and the corners

Jupyter සටහන් පොත පූරණය වෙමින්…
2

A geared beater a month before it

The embedded blueprint beats with two wire whisks turning opposite ways. McBean turns one stepped dasher and lets the box's corners do the breaking up.
3

Read US 24,134

"The nature of my invention consists in arranging a double spiral-shaped beater or dasher with its surface formed into steps within a square box and in communicating to this dasher a swift rotary motion so as to revolve it horizontally within said box."
4

Print the dasher

Print the stepped double-spiral dasher (/uploads/blueprints/stepped-spiral-egg-beater-dasher.stl). Print in PETG at 0.2 mm layers, 30 % infill, 4 walls.

මෙම පියවර සඳහා ද්‍රව්‍ය:

PETG තන්තුPETG තන්තු1 කැබැල්ල

අවශ්‍ය මෙවලම්:

FDM 3D මුද්‍රණ යන්ත්‍රයFDM 3D මුද්‍රණ යන්ත්‍රය
5

Build the box

Cut a plywood base and four sides to make a box 104 mm square inside and 90 mm deep. Glue and screw it, and seal the inside seams with silicone.

මෙම පියවර සඳහා ද්‍රව්‍ය:

ප්ලයිවුඩ් තහඩුවප්ලයිවුඩ් තහඩුව1 කැබැල්ල
ලී ඉස්කුරුප්පුව #8 × අඟල් 1ලී ඉස්කුරුප්පුව #8 × අඟල් 11 කැබැල්ල
සිලිකෝන් මුද්‍රාවසිලිකෝන් මුද්‍රාව1 කැබැල්ල

අවශ්‍ය මෙවලම්:

වක්‍ර කපන කියතවක්‍ර කපන කියත
රැහැන් රහිත සිදුරු යන්ත්‍රයරැහැන් රහිත සිදුරු යන්ත්‍රය
සිදුරු කරන තුඩු කට්ටලයසිදුරු කරන තුඩු කට්ටලය
ඉස්කුරුප්පු නියන කට්ටලයඉස්කුරුප්පු නියන කට්ටලය
රූලක්රූලක්
6

Fit the shaft and gears

Screw a hardwood bar across the box's top with a bracket above it. Run a 5 mm rod down through the bar to a socket in the floor, with the dasher at its foot and one bevel gear at its top; mount the other gear on a crank shaft through the bracket so they mesh.

මෙම පියවර සඳහා ද්‍රව්‍ය:

දැඩි දැව කුට්ටියදැඩි දැව කුට්ටිය1 කැබැල්ල
මෘදු වානේ වටකුරු දණ්ඩමෘදු වානේ වටකුරු දණ්ඩ1 කැබැල්ල
බෙවල් ගියර් කට්ටලය (වානේ, 1:1)බෙවල් ගියර් කට්ටලය (වානේ, 1:1)1 කැබැල්ල
කොටස් දෙකේ එපොක්සිකොටස් දෙකේ එපොක්සි1 කැබැල්ල
පැතලි වොෂරයපැතලි වොෂරය1 කැබැල්ල

අවශ්‍ය මෙවලම්:

යකඩ කපන කියතයකඩ කපන කියත
රැහැන් රහිත සිදුරු යන්ත්‍රයරැහැන් රහිත සිදුරු යන්ත්‍රය
සිදුරු කරන තුඩු කට්ටලයසිදුරු කරන තුඩු කට්ටලය
බංකු තද කරන්නාබංකු තද කරන්නා
7

The patent drawing

US 24,134 drawing sheet, public domain (expired patent).
පියවර 7 - Image 1
8

Square box against round bowl

Beat two egg whites in the box at about two crank turns a second and time them to stiff peaks. Repeat with the dasher in a round bowl of the same size.
පියවර 8 - Image 1

මෙම පියවර සඳහා ද්‍රව්‍ය:

බිත්තරයබිත්තරය4 කැබලි

අවශ්‍ය මෙවලම්:

මල නොබැඳෙන වානේ විශාල මිශ්‍ර කිරීමේ බඳුනමල නොබැඳෙන වානේ විශාල මිශ්‍ර කිරීමේ බඳුන
නැවතුම් ඔරලෝසුවනැවතුම් ඔරලෝසුව
9

A dasher that swirls, scrapes or slips

Stepped spiral egg beater troubleshooting.

Flow

Loading...
10

History and honest limits

**Thomas McBean** of Fowlerville, Livingston County, New York, received US 24,134, dated 24 May 1859. The dasher's spiral circular plates are soldered to a small tube and bent into steps radial from the axis; the shaft passes up through the box's cover to a bracket, its lower end resting on a pin in the box's bottom. He claimed the double spiral dasher in combination with the square box. **Honest limits.** FDM prints hold food in their layer lines, so wash well and replace when worn. A printed dasher and a bought 1:1 bevel pair stand in for his tin plates and pinions. Your times are the result.

ද්‍රව්‍ය

10

අවශ්‍ය මෙවලම්

10

CC0 පොදු වසම

මෙම බ්ලූප්‍රින්ට් CC0 යටතේ නිකුත් කර ඇත. ඔබට අවසර නොමැතිව පිටපත් කිරීම, වෙනස් කිරීම, බෙදා හැරීම සහ භාවිතා කිරීම කළ හැක.

බ්ලූප්‍රින්ට් හරහා නිෂ්පාදන මිලදී ගැනීමෙන් නිර්මාතෘට සහාය වන්න නිර්මාතෘ කොමිසම විකුණුම්කරුවන් විසින් නියම කළ, හෝ මෙම බ්ලූප්‍රින්ට්හි නව අනුවාදයක් සාදා ආදායම බෙදා ගැනීමට ඔබේ බ්ලූප්‍රින්ට්හි සම්බන්ධතාවයක් ලෙස ඇතුළත් කරන්න.

සාකච්ඡාව

(0)

පිවිසෙන්න සාකච්ඡාවට එක්වීමට

අදහස් පූරණය කරමින්...