ပူးပေါင်းဆောင်ရွက်ခြင်း
အနုပညာ
အလှအပနှင့် ကျန်းမာရေး
လက်မှုအနုပညာ
ယဉ်ကျေးမှုနှင့် သမိုင်း
ဖျော်ဖြေရေး
ပတ်ဝန်းကျင်
အစားအစာနှင့် အချိုရည်
ပြောင်းပြန်အင်ဂျင်နီယာပညာ
သိပ္ပံပညာများ
အားကစား
နည်းပညာ
ဝတ်ဆင်နိုင်သောပစ္စည်းများ
Handle: a Wired Tinplate Lifting Handle, Riveted and Soldered On (Hasluck, 1907)
Forge

ဖန်တီးသူ

Forge

4. နိုဝင်ဘာ 2026NO
၁၀
၀
၀
၀
၀

Handle: a Wired Tinplate Lifting Handle, Riveted and Soldered On (Hasluck, 1907)

A tinsmith's lifting handle is a strip of tinplate cut to a tapering pattern, stiffened with wire along its edges and bent so its narrow end curls into a ring, then riveted and soldered to the vessel. Paul N. Hasluck's Tinplate Work (1907) gives it for the strainer of a fish kettle (Figs. 185-186). He gives no sizes for the pattern or the wire; those are unknown here. Source: P. N. Hasluck, Tinplate Work (1907), pp. 89-90. Picture: his Figs. 185 and 186.
အစပြု
An hour for a pair

ညွှန်ကြားချက်များ

1

Read Hasluck

"Having cut two to this pattern, wire the edges, and bend to the shape of Fig. 186, letting the narrow part of the pattern form the ring; then rivet and solder them to the strainer."
2

Cut to the pattern

Mark out the handle on tinplate to the pattern of Fig. 185, a long strip tapering to a narrow end, and cut it out with snips; cut two for a pair. Hasluck gives no sizes (unknown).

ဤအဆင့်အတွက် ကုန်ကြမ်းများ:

သံဖြူပြားသံဖြူပြား1 two strips

လိုအပ်သော ကိရိယာများ:

မျဉ်းဆွဲတံမျဉ်းဆွဲတံ
သံပြားညှပ်ကတ်ကြေးသံပြားညှပ်ကတ်ကြေး
မသိရှိသေးသော အတိုင်းအတာများမသိရှိသေးသော အတိုင်းအတာများ
3

Wire the edges

Wire the edges of each strip: The gauge for the handles is not given; the strainer they are made for is wired with No. 10 B.W.G. tinned wire.

ဤအဆင့်အတွက် ကုန်ကြမ်းများ:

သံဝါယာသံဝါယာ1 edges

လိုအပ်သော ကိရိယာများ:

သစ်သားတူသစ်သားတူ
တံသင်တံသင်
4

Bend the ring

Bend the strip to the shape of Fig. 186, curling the narrow end of the pattern round into the ring you lift by.

လိုအပ်သော ကိရိယာများ:

သစ်သားတူသစ်သားတူ
တံသင်တံသင်
5

Rivet and solder on

Punch the rivet holes, rivet the flat end of the handle to the vessel, and solder it.

ဤအဆင့်အတွက် ကုန်ကြမ်းများ:

သံရစ်ချည်များသံရစ်ချည်များ1 per handle
သံဖြူ-ခဲဂဟေသံဖြူ-ခဲဂဟေ1 small amount

လိုအပ်သော ကိရိယာများ:

သံပြားအပေါက်ဖောက်ကိရိယာသံပြားအပေါက်ဖောက်ကိရိယာ
ရစ်ဗက်တူရစ်ဗက်တူ
လျှပ်စစ် ဂဟေဆော်တံလျှပ်စစ် ဂဟေဆော်တံ
ဖလပ်စ်ဖလပ်စ်
6

History and honest limits

In Hasluck this handle lifts the perforated strainer out of a fish kettle; his colander has a pair of bow handles riveted on opposite each other. He gives the pattern by figure only, with no sizes, and does not say which wire goes in the handle edges; the tools are ours.

ပစ္စည်းများ

4
  • နေရာယူပစ္စည်း
  • နေရာယူပစ္စည်း
  • နေရာယူပစ္စည်း
  • နေရာယူပစ္စည်း

လိုအပ်သော ကိရိယာများ

9

ဤဘလူးပရင့်က ပြုလုပ်သည်

ဆက်စပ် အစီအစဉ်များ

ဤအစီအစဉ်များသည် အသိပညာမျှဝေသည် — နည်းပညာ၊ ပစ္စည်း သို့မဟုတ် မူများ

CC0 အများပိုင်

ဤအစီအစဉ်ကို CC0 အောက်တွင် ထုတ်ဝေထားသည်။ ခွင့်ပြုချက်မလိုဘဲ ကူးယူ၊ ပြင်ဆင်၊ ဖြန့်ဝေ နှင့် အသုံးပြုနိုင်သည်။

အစီအစဉ်မှတစ်ဆင့် ကုန်ပစ္စည်းများဝယ်ယူ၍ လက်မှုပညာရှင်ကို ပံ့ပိုးပါ လက်မှုပညာရှင် ကော်မရှင် ရောင်းချသူက သတ်မှတ်သည်၊ သို့မဟုတ် ဤအစီအစဉ်၏ ဗားရှင်းအသစ်ဖန်တီး၍ ဝင်ငွေခွဲဝေရန် သင့်အစီအစဉ်တွင် ချိတ်ဆက်မှုအဖြစ် ထည့်သွင်းပါ။

ဆွေးနွေးချက်

(0)

ဝင်ရောက် ဆွေးနွေးချက်တွင် ပါဝင်ရန်

မှတ်ချက်များ ရယူနေသည်...