Хамтын ажиллагаа
УРЛАГ
ГОО САЙХАН БА ЭРҮҮЛ МЭНД
ГАРААР ХИЙСЭН
СОЁЛ БА ТҮҮХ
ҮЗВЭР НААДАМ
БАЙГАЛЬ ОРЧИН
ХООЛ БА УНДАА
УРВУУ ИНЖЕНЕРЧЛЭЛ
ШИНЖЛЭХ УХААН
СПОРТ
ТЕХНОЛОГИ
ӨМСДӨГ ХЭРЭГСЭЛ
Handle: a Wired Tinplate Lifting Handle, Riveted and Soldered On (Hasluck, 1907)
Forge

Зохиогч

Forge

4. Арван нэгдүгээр сар 2026NO
15
0
0
0
0

Handle: a Wired Tinplate Lifting Handle, Riveted and Soldered On (Hasluck, 1907)

A tinsmith's lifting handle is a strip of tinplate cut to a tapering pattern, stiffened with wire along its edges and bent so its narrow end curls into a ring, then riveted and soldered to the vessel. Paul N. Hasluck's Tinplate Work (1907) gives it for the strainer of a fish kettle (Figs. 185-186). He gives no sizes for the pattern or the wire; those are unknown here. Source: P. N. Hasluck, Tinplate Work (1907), pp. 89-90. Picture: his Figs. 185 and 186.
Анхан шат
An hour for a pair

Зааварчилгаа

1

Read Hasluck

"Having cut two to this pattern, wire the edges, and bend to the shape of Fig. 186, letting the narrow part of the pattern form the ring; then rivet and solder them to the strainer."
2

Cut to the pattern

Mark out the handle on tinplate to the pattern of Fig. 185, a long strip tapering to a narrow end, and cut it out with snips; cut two for a pair. Hasluck gives no sizes (unknown).

Энэ алхмын материал:

Цагаан тугалган хуудасЦагаан тугалган хуудас1 two strips

Шаардлагатай багаж:

Зурмал зүүЗурмал зүү
Тугалган цаас огтлох хайчТугалган цаас огтлох хайч
Тодорхойгүй хэмжээсТодорхойгүй хэмжээс
3

Wire the edges

Wire the edges of each strip: The gauge for the handles is not given; the strainer they are made for is wired with No. 10 B.W.G. tinned wire.

Энэ алхмын материал:

Төмөр утасТөмөр утас1 edges

Шаардлагатай багаж:

Модон алхМодон алх
ГадасГадас
4

Bend the ring

Bend the strip to the shape of Fig. 186, curling the narrow end of the pattern round into the ring you lift by.

Шаардлагатай багаж:

Модон алхМодон алх
ГадасГадас
5

Rivet and solder on

Punch the rivet holes, rivet the flat end of the handle to the vessel, and solder it.

Энэ алхмын материал:

Төмөр риветТөмөр ривет1 per handle
Цагаан тугалга-хар тугалганы гагнуурЦагаан тугалга-хар тугалганы гагнуур1 small amount

Шаардлагатай багаж:

Хуудас төмрийн нүх цоологчХуудас төмрийн нүх цоологч
Ривет алхРивет алх
Цахилгаан гагнуурын индүүЦахилгаан гагнуурын индүү
ФлюсФлюс
6

History and honest limits

In Hasluck this handle lifts the perforated strainer out of a fish kettle; his colander has a pair of bow handles riveted on opposite each other. He gives the pattern by figure only, with no sizes, and does not say which wire goes in the handle edges; the tools are ours.

Материал

4

Шаардлагатай багаж

9

Энэ загвараар хийдэг

Холбоотой загварууд

Эдгээр загварууд мэдлэг хуваалцдаг — арга техник, материал эсвэл зарчим

CC0 Нийтийн домэйн

Энэ загвар CC0 дор гаргагдсан. Та зөвшөөрөл авахгүйгээр хуулах, өөрчлөх, түгээх, ашиглах боломжтой.

Загвараар дамжуулан бүтээгдэхүүн худалдаж авч Бүтээгчийг дэмжээрэй Бүтээгчийн шимтгэл Борлуулагчаар тогтоосон, эсвэл энэ загварын шинэ хувилбар үүсгэж орлогоо хуваахын тулд өөрийн загварт холбоос болгон оруулна уу.

Хэлэлцүүлэг

(0)

Нэвтрэх хэлэлцүүлэгт нэгдэхийн тулд

Сэтгэгдлүүдийг ачаалж байна...