Хамтын ажиллагаа
УРЛАГ
ГОО САЙХАН БА ЭРҮҮЛ МЭНД
ГАРААР ХИЙСЭН
СОЁЛ БА ТҮҮХ
ҮЗВЭР НААДАМ
БАЙГАЛЬ ОРЧИН
ХООЛ БА УНДАА
УРВУУ ИНЖЕНЕРЧЛЭЛ
ШИНЖЛЭХ УХААН
СПОРТ
ТЕХНОЛОГИ
ӨМСДӨГ ХЭРЭГСЭЛ
Horizontal Cylinder Still: the Riveted Fire Still (Bell, 1923)
Forge

Зохиогч

Forge

4. Арван нэгдүгээр сар 2026NO
8
0
0
0
0

Horizontal Cylinder Still: the Riveted Fire Still (Bell, 1923)

The refinery's direct-fired crude still: a long horizontal cylinder of riveted steel plate hung on lugs over a brick furnace, with a steam line, manholes, a vapour outlet to the condensers and a bottom outlet for residue. Variable: size; the favoured length is about three times the diameter. Bell's Fig. 15 is a 600-barrel still, 12 ft across and 36 ft long, of 1/2 in plate throughout. Source: H. S. Bell, American Petroleum Refining (1923), pp. 83-92. Picture: Fig. 15 of the book.
Мэргэжилтэн
Unknown

Зааварчилгаа

1

Size the still

Make it about three times as long as it is wide. Batch stills take overhead about 1.5 gallons per hour per square foot of evaporating surface (two-thirds of diameter x length); continuous ones about 2.5. Give the vapour outlet at least 0.17 sq in per gallon of distillate per hour, placed half to two-thirds of the way from the fire end.

Шаардлагатай багаж:

Тодорхойгүй хэмжээсТодорхойгүй хэмжээс
2

Choose and roll the plates

Use fire-box or still-bottom steel 1/2 in thick for the bottom (5/8 in for stills run down to coke; more is not worth it). Up to 10 ft diameter, 3/8 in flange steel does for the sides and top; larger stills, 1/2 in throughout. Up to 30 ft long: bottom of two plates, sides of three, top of narrow barrel plates; longer: three, four and barrel plates 5 to 6 ft wide. Keep the caulking edges of the bottom plates away from the fire. Dish the heads to a radius equal to the diameter, in one piece up to 10 ft, otherwise seamed on the horizontal diameter, as thick as the shell or 1/16 in thicker.

Энэ алхмын материал:

Зөөлөн ган хавтанЗөөлөн ган хавтан1 shell, heads

Шаардлагатай багаж:

Хуудас нугалах галзууХуудас нугалах галзуу
Цоолох шахуургаЦоолох шахуурга
3

Rivet and caulk

Double-rivet all seams except at flanges and openings, with 3/4 in rivets even in the bottom, so holes can later be reamed to 7/8 or 1 in for repairs. Bevel and caulk the plates inside and out.

Энэ алхмын материал:

Ган риветГан ривет1 3/4 in

Шаардлагатай багаж:

Ривет алхРивет алх
4

Fit openings and steam line

Fit (Fig. 15) a 24 in manhole in the front head, 18 in manholes on top, a 12 in vapour outlet, a 2 in steam line, a tar plug and a 4 in bottom outlet; caulk steel details to the shell and give cast-iron ones a caulking pad. Rivet lugs on the sides.

Энэ алхмын материал:

Цутгамал төмөр эдлэлЦутгамал төмөр эдлэл1 manhole frames, outlet castings
Ган хоолой (зузаан ханатай, эргэлдэх сүвтэй үзүүртэй)Ган хоолой (зузаан ханатай, эргэлдэх сүвтэй үзүүртэй)1 2 in steam line
Уурын хаалтУурын хаалт1 ширхэг
Хаалганы хаалтХаалганы хаалт1 4 in outlet
Зөөлөн ганан өнцөгт төмөрЗөөлөн ганан өнцөгт төмөр1 lugs

Шаардлагатай багаж:

Ривет алхРивет алх
5

Set it over the furnace

Hang the still on lugs from columns on concrete piers, lugs no more than 7 ft apart, so it is independent of the brickwork (Fig. 21). Set it at least 7 to 8 ft above the grates or burners, or better, put the fire box in a Dutch oven in front, for clean combustion. Batch stills expose about a third of the circumference to the fire; for continuous running raise the lugs 12 in above the centre line with a stiff tie between them and fire the full half circumference.

Энэ алхмын материал:

БетонБетон1 piers
Галд тэсвэртэй шавран тоосгоГалд тэсвэртэй шавран тоосго1 furnace lining
ТоосгоТоосго1 setting

Шаардлагатай багаж:

Барилгын халбага (шпатель)Барилгын халбага (шпатель)

Материал

10

Шаардлагатай багаж

5

CC0 Нийтийн домэйн

Энэ загвар CC0 дор гаргагдсан. Та зөвшөөрөл авахгүйгээр хуулах, өөрчлөх, түгээх, ашиглах боломжтой.

Загвараар дамжуулан бүтээгдэхүүн худалдаж авч Бүтээгчийг дэмжээрэй Бүтээгчийн шимтгэл Борлуулагчаар тогтоосон, эсвэл энэ загварын шинэ хувилбар үүсгэж орлогоо хуваахын тулд өөрийн загварт холбоос болгон оруулна уу.

Хэлэлцүүлэг

(0)

Нэвтрэх хэлэлцүүлэгт нэгдэхийн тулд

Сэтгэгдлүүдийг ачаалж байна...