УРЛАГ
ГОО САЙХАН БА ЭРҮҮЛ МЭНД
ГАРААР ХИЙСЭН
СОЁЛ БА ТҮҮХ
ҮЗВЭР НААДАМ
БАЙГАЛЬ ОРЧИН
ХООЛ БА УНДАА
УРВУУ ИНЖЕНЕРЧЛЭЛ
ШИНЖЛЭХ УХААН
СПОРТ
ТЕХНОЛОГИ
ӨМСДӨГ ХЭРЭГСЭЛ
Ice-Drawer Butter Worker: An Ice Box Under the Tray, a Worker With Acute Edges
Smith kept the butter cold while it was worked, with ice in a drawer under the tray.
Lettie A. Smith of Pineville, Bucks County, Pennsylvania, received US 9,959, dated 23 August 1853, for the "Labor-Saving Butter-Worker": a tray hinged at its back on a frame, its front resting on a sliding carriage of two notched posts so it can stand flat or inclined; a cooling drawer under it "into which ice is placed for keeping the butter in a cool and nice state while being worked"; a working lever with one end playing in a circular opening in the frame, "formed with acute angles at the sides of its working face" to break or press the butter and turn it over; a spout for the water; and a hook for steelyards to weigh the butter.
This rung works out the tray's slopes, then prints the worker, its socket, the notched posts and spout, builds the frame, and works butter.
Дунд шат
About 4 hours, plus printing
Зааварчилгаа
1
1
The tray's slope
The tray's slope
Jupyter дэвтэр ачаалж байна…
2
2
Working butter before it
Working butter before it
The embedded blueprint works the butter inside the churn, drawing it past fixed posts. Smith takes it out to a tray kept cold by an ice drawer, and works it by hand.
3
3
Read US 9,959
Read US 9,959
"The butter after being taken from the churn is placed in the tray or pan E, and there washed and worked up together in the usual manner by the worker H, until all the impurities are extracted and all the water expressed from the same; the water and all extraneous matter runs down the inclined bottom of the pan and escapes through the spout."
4
4
Print the parts
Print the parts
Print the worker head with its triangular working bar, ball end and handle socket, the ball plate with its round opening, two notched posts with their projections and the spout. Print the worker on its flat working face. Print in PETG at 0.2 mm layers, 30 % infill, 4 walls; wash before first use.
Энэ алхмын материал:
PETG филамент1 ширхэгШаардлагатай багаж:
FDM 3D хэвлэгч5
5
Print the worker
6
6
Print the ball plate
Print the ball plate
The ball plate, printed as step 4 describes.
7
7
Print the notched post
Print the notched post
The notched post, printed as step 4 describes.
8
8
Print the spout
9
9
Frame, tray and ice drawer
Frame, tray and ice drawer
Build a pine frame about 320 by 220 mm and 260 mm high, with a cross bar across its front and runners below the top. Use a shallow rectangular food-grade container as the tray; hinge its back end to the frame, drill a 16 mm hole at that low end and seal the spout in it with food-safe silicone. Slide a roasting pan onto the runners under the tray as the ice drawer.
Энэ алхмын материал:
Нарсан банз1 ширхэг
Хүнсний зэрэглэлийн хадгалах сав1 ширхэг
Хаалганы нугас1 ширхэг
Силиконон битүүлэгч1 ширхэг
Шарах хайруулга1 ширхэг
#8 × 1" модны шураг1 ширхэгШаардлагатай багаж:
Гар хөрөө
Утасгүй өрөм
Өрмийн үзүүрийн иж бүрдэл
Нүх хөрөөдөгч багц
Халив иж бүрдэл10
10
Posts, springs and worker
Posts, springs and worker
Hang the two notched posts on the front cross bar so the tray's front rests on their projections, and screw a strip of spring steel to the frame against each post to keep it in its notch. Screw the ball plate to the back of the frame above the tray's hinge, snap the worker's ball into it, and glue a 20 mm dowel into its socket as the handle, long enough to reach over the tray's front.
Энэ алхмын материал:
Пүршний ган тууз1 ширхэг
Хатуу модон гадас1 ширхэг
Модны цавуу1 ширхэг#8 × 1" модны шураг1 ширхэгШаардлагатай багаж:
Төмөр хөрөөХалив иж бүрдэл
Элсэн цаас11
11
The patent drawing
The patent drawing
US 9,959 drawing sheet, public domain (expired patent).
12
12
Churn, then work the butter cold
Churn, then work the butter cold
Let the heavy cream stand until it reaches about 15 °C, checked with the thermometer. Churn 1 litre in any churn until the butter comes, and drain it. Fill the drawer with ice. Set the tray flat, put in the butter and cold water and press and turn it with the worker's edges; raise the tray's front a notch or two so the water runs out of the spout. Repeat with fresh water until it runs clear, work in a pinch of salt and weigh the butter.
Энэ алхмын материал:
Өтгөн цөцгий1000 мл
Мөсний шоо1 ширхэг
Бүдүүн далайн давс1 ширхэг
Ус1 ширхэгШаардлагатай багаж:
Дотор нь үлдээдэг мэдрэгчтэй термометр
Секунд хэмжигч
Дижитал гал тогооны жин
Зэвэрдэггүй ган том хольц аяга13
13
Posts that slip, butter that smears
Posts that slip, butter that smears
Ice-drawer butter worker troubleshooting.
Flow
Loading...
14
14
History and honest limits
History and honest limits
**Lettie A. Smith** of Pineville, Bucks County, Pennsylvania, received US 9,959, dated 23 August 1853, for the "Labor-Saving Butter-Worker." The specification calls the tray both E and F, and E is also the cross bar the notches rest on. The claims are the cooling drawer or ice box G combined with the butter tray, and the working lever formed with acute angles at the sides of its working face; Smith did not claim the working lever with a tray in general.
**Honest limits.** A container, a roasting pan, pine and printed parts stand in for the original; we weigh on a kitchen scale, not steelyards. FDM prints hold food in their layer lines, so wash well and replace when worn. Your weights are the result.
Материал
14- 1 ширхэгТүр орлуулагч
- 1 ширхэгТүр орлуулагч
- 1 ширхэгТүр орлуулагч
- 1 ширхэгТүр орлуулагч
- 1 ширхэгТүр орлуулагч
- 1 ширхэгТүр орлуулагч
- 2 ширхэгТүр орлуулагч
- 1 ширхэгТүр орлуулагч
- 1 ширхэгТүр орлуулагч
- 1 ширхэгТүр орлуулагч
- 1000 млТүр орлуулагч
- 1 ширхэгТүр орлуулагч
- 1 ширхэгТүр орлуулагч
- 1 ширхэгТүр орлуулагч
Шаардлагатай багаж
12- Түр орлуулагч
- Түр орлуулагч
- 1 vendor sell this, none ship to you yetТүр орлуулагч
- Түр орлуулагч
- Түр орлуулагч
- Түр орлуулагч
- Түр орлуулагч
- Түр орлуулагч
- Түр орлуулагч
- Түр орлуулагч
- Түр орлуулагч
- Түр орлуулагч
Загварын файлууд
4Холбоотой загварууд
Эдгээр загварууд мэдлэг хуваалцдаг — арга техник, материал эсвэл зарчим
Post-and-Float Butter-Working Churn: Floats Revolving Astride Fixed Posts
Woody зохиосон
Мод боловсруулалт
32
0
0
0
0
0
Water-Jacketed Churn: Hot or Cold Water Under a Metal Plate Tempers the Cream
Karen зохиосон
ХООЛ БА УНДАА
34
0
0
0
0
0
Churning Butter from Cream — The 5,000-Year-Old Fat Separation
TheChef зохиосон
ГАРААР ХИЙСЭН
54
0
0
0
0
0
CC0 Нийтийн домэйн
Энэ загвар CC0 дор гаргагдсан. Та зөвшөөрөл авахгүйгээр хуулах, өөрчлөх, түгээх, ашиглах боломжтой.
Загвараар дамжуулан бүтээгдэхүүн худалдаж авч Бүтээгчийг дэмжээрэй Бүтээгчийн шимтгэл Борлуулагчаар тогтоосон, эсвэл энэ загварын шинэ хувилбар үүсгэж орлогоо хуваахын тулд өөрийн загварт холбоос болгон оруулна уу.