Хамтын ажиллагаа
УРЛАГ
ГОО САЙХАН БА ЭРҮҮЛ МЭНД
ГАРААР ХИЙСЭН
СОЁЛ БА ТҮҮХ
ҮЗВЭР НААДАМ
БАЙГАЛЬ ОРЧИН
ХООЛ БА УНДАА
УРВУУ ИНЖЕНЕРЧЛЭЛ
ШИНЖЛЭХ УХААН
СПОРТ
ТЕХНОЛОГИ
ӨМСДӨГ ХЭРЭГСЭЛ
Lead-Lined Tank: a Steel Acid Tank with an Antimonial Lead Lining (Bell, 1923)
Forge

Зохиогч

Forge

4. Арван нэгдүгээр сар 2026NO
8
0
0
1
0

Lead-Lined Tank: a Steel Acid Tank with an Antimonial Lead Lining (Bell, 1923)

A riveted steel tank lined with sheet lead, for weak sulphuric acid, which eats bare steel. The lead hangs from the top angle and is held to the shell by steel straps covered with lead burned to the lining. Bell's example (Fig. 170) is a vertical tank 15 ft across and 10 ft high, lined with 6 % antimony lead at 7 1/2 lb per sq ft. Source: H. S. Bell, American Petroleum Refining (1923), pp. 305-306. Picture: Fig. 170 of the book.
Мэргэжилтэн
Unknown

Зааварчилгаа

1

Build the steel tank

Build the shell as a standard riveted vertical tank, with plate at least 3/8 in thick. Drive the rivets with flat heads 1/16 to 1/8 in high inside, and leave out an occasional rivet so leaks in the lining can be found. The shell plates need not be bevelled or caulked. If you can, stand it on concrete piers with steel I-beams so the bottom can be inspected, and protect the concrete with coal tar or petroleum pitch.

Энэ алхмын материал:

Зөөлөн ган хавтанЗөөлөн ган хавтан1 3/8 in min.
Ган риветГан ривет1 ширхэг

Шаардлагатай багаж:

Ривет алхРивет алх
Нүүрсний давирхайн өтгөн үлдэгдэлНүүрсний давирхайн өтгөн үлдэгдэл
Тодорхойгүй хэмжээсТодорхойгүй хэмжээс
2

Cut the lead

Use chemical lead at 8 lb per sq ft, or 6 % antimony lead at 7 1/2 lb per sq ft. For Bell's 15 x 10 ft tank: 7 sheets 10 ft 11 in x 7 ft 2 in, 7 sheets 10 ft 11 in x 7 in, and 2 half-circle sheets of 8 ft radius for the bottom.

Энэ алхмын материал:

Хар тугалганы хуудасХар тугалганы хуудас16 sheets, 6 % antimony, 7 1/2 lb/sq ft

Шаардлагатай багаж:

Тугалган цаас огтлох хайчТугалган цаас огтлох хайч
3

Hang and strap the lining

Dress the lead over the top angle to carry it. Hold it to the shell with straps of round-edged tire steel (Fig. 170: seven straps 2 1/2 x 3/8 in, about 9 ft long), no more than 8 ft apart round the shell; round edges won't cut the lead while it is dressed. Bolt the straps through the shell with 1/2 in bolts, heads countersunk inside.

Энэ алхмын материал:

Зөөлөн ганы хавтгай туйванЗөөлөн ганы хавтгай туйван7 2 1/2 x 3/8 in, about 9 ft
Зургаан талт толгойт болт - зэрэглэл 8.8Зургаан талт толгойт болт - зэрэглэл 8.81 1/2 in, number not given

Шаардлагатай багаж:

Модон алхМодон алх
4

Burn the seams and cover the straps

Burn (fuse) the lead seams together. Burn a narrow strip of lead over each strap onto the lining, so no steel or bolt head is left bare to the acid. Not given: the burning tool.

Энэ алхмын материал:

Хар тугалганы хуудасХар тугалганы хуудас1 cover strips

Шаардлагатай багаж:

БамбарБамбар

Материал

5

Шаардлагатай багаж

6

CC0 Нийтийн домэйн

Энэ загвар CC0 дор гаргагдсан. Та зөвшөөрөл авахгүйгээр хуулах, өөрчлөх, түгээх, ашиглах боломжтой.

Загвараар дамжуулан бүтээгдэхүүн худалдаж авч Бүтээгчийг дэмжээрэй Бүтээгчийн шимтгэл Борлуулагчаар тогтоосон, эсвэл энэ загварын шинэ хувилбар үүсгэж орлогоо хуваахын тулд өөрийн загварт холбоос болгон оруулна уу.

Хэлэлцүүлэг

(0)

Нэвтрэх хэлэлцүүлэгт нэгдэхийн тулд

Сэтгэгдлүүдийг ачаалж байна...