УРЛАГ
ГОО САЙХАН БА ЭРҮҮЛ МЭНД
ГАРААР ХИЙСЭН
СОЁЛ БА ТҮҮХ
ҮЗВЭР НААДАМ
БАЙГАЛЬ ОРЧИН
ХООЛ БА УНДАА
УРВУУ ИНЖЕНЕРЧЛЭЛ
ШИНЖЛЭХ УХААН
СПОРТ
ТЕХНОЛОГИ
ӨМСДӨГ ХЭРЭГСЭЛ
The Oil-Wick Fountain Brush: A Can Whose Wick Is the Brush
Woody

Зохиогч

Woody

6. Аравдугаар сар 2026NO
32
0
0
0
0

The Oil-Wick Fountain Brush: A Can Whose Wick Is the Brush

An oil can and a rag spill, and a brush dipped in oil drips. Preston H. Clingan of Florence, Colorado, received US 787,278, dated 11 April 1905, for "a can of very simple form which is so constructed as to prevent the possibility of spilling the contents thereof": an open thimble hangs from the can's mouth to near its bottom, a rolled burlap wick inside it is frayed above the mouth into a brush, and oil in the chamber round the thimble reaches the wick from underneath. This rung works out how high a wick can lift oil, then builds the can from a jar, a tin and burlap and weighs the oil it lays on a board.
Анхан шат
About 2 hours

Зааварчилгаа

1

How high the wick lifts

Jupyter дэвтэр ачаалж байна…
2

A wick that feeds oil before it

The embedded blueprint feeds oil to a bearing through a wick. Clingan turns the wick's frayed end into the brush.
3

Read US 787,278

"My object is to provide a can of very simple form which is so constructed as to prevent the possibility of spilling the contents thereof. The can includes a wick of absorbent material, which is constantly supplied with oil or other fluid within the can."
4

Make the thimble

Remove both ends of a tin can that passes through the jar's mouth with 6 mm to spare. Cut it 10 mm shorter than the jar's inside height. File the cut edges.

Энэ алхмын материал:

Цагаан тугалган савЦагаан тугалган сав1 ширхэг

Шаардлагатай багаж:

Тугалган цаас огтлох хайчТугалган цаас огтлох хайч
Дүрд (гар дүрд)Дүрд (гар дүрд)
ШугамШугам
Арьсан ажлын бээлийАрьсан ажлын бээлий
5

Cut the lip ring

Cut an aluminium ring: outside to fit inside the jar's mouth, inside to fit round the thimble. Drill it 3 mm for a filling screw.

Энэ алхмын материал:

Хөнгөн цагаан хуудасХөнгөн цагаан хуудас1 ширхэг

Шаардлагатай багаж:

Тугалган цаас огтлох хайчТугалган цаас огтлох хайч
Утасгүй өрөмУтасгүй өрөм
Өрмийн үзүүрийн иж бүрдэлӨрмийн үзүүрийн иж бүрдэл
Дүрд (гар дүрд)Дүрд (гар дүрд)
6

Fix the thimble

Epoxy the ring round the thimble's top and into the jar's mouth, the thimble hanging 10 mm clear of the floor. Cut a rubber washer for the filling screw.

Энэ алхмын материал:

Шилэн савШилэн сав1 ширхэг
Хоёр бүрэлдэхүүнт эпоксиХоёр бүрэлдэхүүнт эпокси1 ширхэг
Машины шурагМашины шураг1 ширхэг
Резинэн хавтанРезинэн хавтан1 ширхэг

Шаардлагатай багаж:

Гар урлалын хутгаГар урлалын хутга
Халив иж бүрдэлХалив иж бүрдэл
7

Roll the wick

Roll a strip of burlap tightly until it fills the thimble, 15 mm longer than it. Push it in and fray the top 15 mm with the fingers.

Энэ алхмын материал:

Шуудайн бөсШуудайн бөс1 ширхэг

Шаардлагатай багаж:

ХайчХайч
ШугамШугам
8

The build in 3D

FreeCAD model of this build, not of the patent: a 90 mm jar with a 66 mm mouth, the aluminium lip ring and filling screw, a 53 mm thimble 10 mm off the floor, the burlap wick with its frayed top, and the lid.
Дизайны файлBLENDCC0 - Free
9

Oil a board and weigh it

Pour linseed oil through the filling hole to half the jar's height and wait until the wick's top darkens. Weigh a plywood board, brush it once over, and weigh it again. Turn the closed jar on its side over a rag for a minute.
Алхам 9 - Image 1

Энэ алхмын материал:

Буцалгасан маалингын тосБуцалгасан маалингын тос1 ширхэг
Фанер хуудасФанер хуудас1 ширхэг
Хөвөн даавууны хэрчимХөвөн даавууны хэрчим1 ширхэг

Шаардлагатай багаж:

Дижитал гал тогооны жинДижитал гал тогооны жин
Секунд хэмжигчСекунд хэмжигч
Соронзон хэмжих туузан шугамСоронзон хэмжих туузан шугам
10

A wick that stays dry, floods or leaks

Oil-wick fountain brush troubleshooting.

Flow

Loading...
11

History and honest limits

**Preston H. Clingan** of Florence, Colorado, assignor of one-half to John H. Todd of Cañon City, filed US 787,278 on 28 July 1904; it is dated 11 April 1905. His can is cylindrical with both ends contracted and threaded, so the cover fits either end; the thimble is soldered to an inward lip at the mouth; the wick is preferably a roll of burlap. He named oiling or polishing surfaces and cleaning windows among its uses. **Honest limits.** A jar with one threaded mouth stands in for his can. The notebook assumes a fully wetting wick and one pore size. Your weights are the result.

Материал

10

Шаардлагатай багаж

12

Загварын файлууд

1

CC0 Нийтийн домэйн

Энэ загвар CC0 дор гаргагдсан. Та зөвшөөрөл авахгүйгээр хуулах, өөрчлөх, түгээх, ашиглах боломжтой.

Загвараар дамжуулан бүтээгдэхүүн худалдаж авч Бүтээгчийг дэмжээрэй Бүтээгчийн шимтгэл Борлуулагчаар тогтоосон, эсвэл энэ загварын шинэ хувилбар үүсгэж орлогоо хуваахын тулд өөрийн загварт холбоос болгон оруулна уу.

Хэлэлцүүлэг

(0)

Нэвтрэх хэлэлцүүлэгт нэгдэхийн тулд

Сэтгэгдлүүдийг ачаалж байна...