Хамтын ажиллагаа
УРЛАГ
ГОО САЙХАН БА ЭРҮҮЛ МЭНД
ГАРААР ХИЙСЭН
СОЁЛ БА ТҮҮХ
ҮЗВЭР НААДАМ
БАЙГАЛЬ ОРЧИН
ХООЛ БА УНДАА
УРВУУ ИНЖЕНЕРЧЛЭЛ
ШИНЖЛЭХ УХААН
СПОРТ
ТЕХНОЛОГИ
ӨМСДӨГ ХЭРЭГСЭЛ

Wing Nut from an Ordinary Nut and a Riveted Wire Staple (Boy Mechanic, 1915)
A thumb-turned nut of any size you need: drill through two opposite corners of an ordinary nut and rivet in a wire staple that stands up as a handle, high enough to clear the bolt end.
Анхан шат
Twenty minutes each
Зааварчилгаа
1
1
Read the Boy Mechanic
Read the Boy Mechanic
"A hole was drilled through opposite corners of each nut and a staple made of wire riveted in the holes."
2
2
Drill the corners
Drill the corners
Hold the nut in a vise and drill a small hole through each of two opposite corners, parallel to the bolt hole. (His sketch shows a square nut; using a hex nut is ours.)
Энэ алхмын материал:
Зургаан талт эрэг1 ширхэгШаардлагатай багаж:
Ширээний хавчаар
Гар өрөм3
3
Bend the staple
Bend the staple
Bend a piece of stiff wire into a U-shaped staple whose legs fit the holes and whose loop stands high enough to clear the end of the bolt.
Энэ алхмын материал:
Төмөр утас1 ширхэгШаардлагатай багаж:
Хавтгай хошуут хямсаа
Төмөр хөрөө4
4
Rivet it
Rivet it
Push the staple legs through the holes and rivet the ends over on the underside of the nut.
Шаардлагатай багаж:
Алх
Ширээний хавчаар5
5
Troubleshooting
Troubleshooting
Wing nut troubleshooting.
Flow
Loading...
6
6
History and honest limits
History and honest limits
From **The Boy Mechanic, Book 2** (Popular Mechanics, 1915), p. 182, by Clarence L. Orcutt (checked on the archive.org scan boymechanicbook200chic2). No sizes are given; the tools are ours.
Материал
2- 1 ширхэгТүр орлуулагч
- 1 ширхэгТүр орлуулагч
Энэ загвараар хийдэг
Холбоотой загварууд
Эдгээр загварууд мэдлэг хуваалцдаг — арга техник, материал эсвэл зарчим
CC0 Нийтийн домэйн
Энэ загвар CC0 дор гаргагдсан. Та зөвшөөрөл авахгүйгээр хуулах, өөрчлөх, түгээх, ашиглах боломжтой.
Загвараар дамжуулан бүтээгдэхүүн худалдаж авч Бүтээгчийг дэмжээрэй Бүтээгчийн шимтгэл Борлуулагчаар тогтоосон, эсвэл энэ загварын шинэ хувилбар үүсгэж орлогоо хуваахын тулд өөрийн загварт холбоос болгон оруулна уу.

