ARTE
BELLEZA Y BIENESTAR
ARTESANÍA
CULTURA E HISTORIA
ENTRETENIMIENTO
MEDIO AMBIENTE
COMIDA Y BEBIDAS
INGENIERÍA INVERSA
CIENCIAS
DEPORTES
TECNOLOGÍA
TECNOLOGÍA VESTIBLE

Retrofocus Wide-Angle Lens
Reflex cameras put a mirror between the lens and the film, and a conventional wide-angle lens needs to sit closer to the film than the mirror allows. Pierre Angénieux in Paris reversed the telephoto idea: a diverging group in front, a converging group well behind it, so the lens's focus lies further back than its focal length.
**US 2,649,022**, "Wide-angle photographic objective lens assembly", Angénieux, filed 29. July 1950, granted 18. August 1953, describes an objective whose "distance along the axis between the back surface of the last lens and the focal plane … is relatively very large with respect to the focal length". (His US 2,649,021 of the same day is a different lens - a large-aperture projection objective.)
**You build one on the bench**, measure its back focus against its focal length, and fit a mirror in the room it leaves.
Principiante
90 minutes
Instrucciones
1
1
Two lenses, reversed
Two lenses, reversed
Front: concave about -50 mm, facing the scene. Rear: convex about 50 mm, 60 mm behind it. Aim out of a window.
Materiales para este paso:
Lente cóncava1 pieza
Juego de lentes convergentes1 juegoHerramientas necesarias:
Banco y raíl óptico
Juego de portalentes2
2
Find the focus
Find the focus
Move a tracing-paper screen until the distant scene is sharp. Measure rear lens to screen: the back focus. Measure the height of one far feature on the screen.
Materiales para este paso:
Rollo de papel de calco para patrones1 hoja
Cinta de carrocero1 rolloHerramientas necesarias:
Regla de acero3
3
Compare one lens
Compare one lens
Remove the concave lens. The +50 mm lens alone focuses about 50 mm behind itself; measure the same feature's height.
Herramientas necesarias:
Regla de acero4
4
Fit the mirror
Fit the mirror
Put the concave lens back. Stand a small mirror at 45 degrees between the rear lens and the screen position and turn the screen to catch the image from the side - a reflex viewfinder. With the single lens there is no room.
Materiales para este paso:
Espejo plano1 pieza5
5
Back focus vs focal length
Back focus vs focal length
Cargando el cuaderno de Jupyter…
6
6
History & Context
History & Context
**What the patent specifies:** a diverging meniscus front element and a converging group far behind it, giving a back focal distance large compared with the focal length. **Modern build (derived):** two stock lenses and a mirror.
Angénieux sold it as the Retrofocus; nearly every SLR wide-angle since uses the layout. Its limits: the asymmetry brings barrel distortion, and the big front element makes the lens larger and heavier than a symmetric design.

Materiales
5- 1 piezaMarcador de posición
- 1 juegoMarcador de posición
- Marcador de posición
- 1 rolloMarcador de posición
- 1 piezaMarcador de posición
Herramientas requeridas
3- Banco y raíl óptico10% de comisiónMarcador de posición
- Juego de portalentes10% de comisiónMarcador de posición
- Marcador de posición
Blueprints relacionados
Estos blueprints comparten conocimiento — técnicas, materiales o principios
CC0 Dominio público
Este Blueprint se publica bajo CC0. Eres libre de copiar, modificar, distribuir y usar este trabajo para cualquier propósito, sin pedir permiso.
Apoya al Maker comprando productos a través de su Blueprint, donde gana una Comisión del Maker establecida por los vendedores, o crea una nueva iteración de este Blueprint e inclúyela como conexión en tu propio Blueprint para compartir ingresos.

