ARTE
BELLEZA Y BIENESTAR
ARTESANÍA
CULTURA E HISTORIA
ENTRETENIMIENTO
MEDIO AMBIENTE
COMIDA Y BEBIDAS
INGENIERÍA INVERSA
CIENCIAS
DEPORTES
TECNOLOGÍA
TECNOLOGÍA VESTIBLE
Young's Double Slit
Penny

Creado por

Penny

30. agosto 2026DK
27
0
0
0
0

Young's Double Slit

Newton's corpuscles had held for a century, and Thomas Young's demonstration to the Royal Society in 1803 was the thing they could not survive. Light through two narrow openings does not make two bright patches. It makes a row of evenly spaced bands, with DARKNESS between them — places where light plus light gives nothing. Particles cannot do that. Waves do it necessarily: two crests arriving together add, a crest meeting a trough cancels, and the alternation across the screen follows from nothing more than the two paths having different lengths. What makes it an instrument rather than an argument is the arithmetic. The fringe spacing is the wavelength multiplied by the screen distance and divided by the slit separation — and the last two are things you can measure with a rule. Young measured the wavelength of light in 1803, to within a few percent of the modern value, using apparatus that would not embarrass a school today. Take the geometry seriously and it is the whole trick of this batch in one line. A half-micrometre quantity is turned into a five-millimetre one by a lever ratio of ten thousand, built out of nothing but a long room.
Principiante
2 hours

Instrucciones

1

Cut the slits

Blacken a microscope slide with a candle or a marker, then draw two razor blades taped together edge-to-edge across it in one stroke. The blades' own thickness sets the separation, around a quarter of a millimetre. Measure that separation under the hand lens against a rule, or photograph it beside a scale. Get it to within a few percent — it goes straight into the answer.

Materiales para este paso:

Microscope Slides with CoverslipsMicroscope Slides with Coverslips1 pieza
Razor BladeRazor Blade2 piezas
Masking TapeMasking Tape1 rollo

Herramientas necesarias:

Hand Lens (10x)Hand Lens (10x)
Steel RuleSteel Rule
Digital Caliper 6-InchDigital Caliper 6-Inch
2

Measure ten fringes

Set the slits a couple of metres from a wall in a dark room and shine the laser through them. Wear the safety glasses. A row of dots appears; if you see one, you are through only one slit — move the mask sideways. Tape paper to the wall, mark ten successive bright centres, and measure the slit-to-wall distance with a tape. Mark ten, not one: locating a single fringe centre is worth about a third of a fringe, and over ten that error divides by ten.

Materiales para este paso:

Card StockCard Stock1 paquete

Herramientas necesarias:

Laser PointerLaser Pointer
Laser Safety GlassesLaser Safety Glasses
Steel RuleSteel Rule
3

Extract the wavelength, and see the two families

Cargando el cuaderno de Jupyter…

Herramientas necesarias:

Desktop ComputerDesktop Computer
4

Compendium: what Young actually did

THE HISTORICAL RECORD, KEPT SEPARATE FROM THE MODERN DEMONSTRATION. Young's 1803 paper describes splitting a sunbeam with a narrow CARD held edgewise in it, and observing the fringes in the shadow — not the two-slit mask that carries his name in every textbook. He also described and used slits, and the physics is identical, but the tidy version taught now is a later idealisation of a messier and more ingenious experiment. WHY IT DID NOT SETTLE THE ARGUMENT IMMEDIATELY. Young was attacking Newton in Newton's own country and was answered with ridicule rather than experiment. The wave theory won a generation later, on the Continent, when Fresnel's mathematics predicted something nobody expected — a bright SPOT at the centre of a circular shadow — and Arago went and found it. A theory that explains what you already knew persuades far less than one that tells you where to look next.

Materiales

4

Herramientas requeridas

6

CC0 Dominio público

Este Blueprint se publica bajo CC0. Eres libre de copiar, modificar, distribuir y usar este trabajo para cualquier propósito, sin pedir permiso.

Apoya al Maker comprando productos a través de su Blueprint, donde gana una Comisión del Maker establecida por los vendedores, o crea una nueva iteración de este Blueprint e inclúyela como conexión en tu propio Blueprint para compartir ingresos.

Discusión

(0)

Iniciar sesión para unirte a la discusión

Cargando comentarios...