SENI
KECANTIKAN & KESEJAHTERAAN
KRAFTANGAN
BUDAYA & SEJARAH
HIBURAN
ALAM SEKITAR
MAKANAN & MINUMAN
KEJURUTERAAN TERBALIK
SAINS
SUKAN
TEKNOLOGI
BOLEH PAKAI
Brick Blacksmith's Forge with a Bottom-Blast Tuyere
Forge

Dicipta oleh

Forge

11. Oktober 2026NO
19
0
0
0
0

Brick Blacksmith's Forge with a Bottom-Blast Tuyere

A forge is a hearth with a bowl for the fire and an opening in its bottom, the tuyere, through which the blast of air is forced. One smith's forge of the 1880s was two feet four inches high and four feet square, built of brick and stone, with a 12-inch chimney flue, the tuyere iron set four inches below the surface and the forge hollow underneath so the fire could be dumped and the ashes cleared. Advice of the same time: keep the tuyere's centre at least eighteen inches from the back wall and the working side, set its top four to six inches below the hearth (deeper for heavy work), and leave a recess in the back wall at least 8 inches deep, 24 high and 24 wide. The blast came from a blower or bellows.
Pertengahan
Several days

Arahan

1

Build the base

Build the hearth of brick and stone, about two feet four inches high and four feet square (one smith's size), hollow underneath with an opening for the ash.

Bahan untuk langkah ini:

Batu tanah liat bakarBatu tanah liat bakar1 as required
Batu-batuBatu-batu1 as required

Alatan diperlukan:

Sudip simen tukang batuSudip simen tukang batu
2

Back wall and recess

Raise the back wall and chimney with a 12-inch flue; leave a recess at least 8 in deep, 24 in high and 24 in wide behind the fire.

Bahan untuk langkah ini:

Paip serombongPaip serombong1 keping

Alatan diperlukan:

Sudip simen tukang batuSudip simen tukang batu
3

Set the tuyere

Set the tuyere with its centre at least 18 in from the back wall and the working side, its top 4–6 in below the hearth surface.

Bahan untuk langkah ini:

Tuyer besi tuangTuyer besi tuang1 keping
4

Blast

Connect the blower or bellows to the tuyere pipe, with a way to open it underneath and clear cinders.

Alatan diperlukan:

Peniup relau tempa engkol tanganPeniup relau tempa engkol tangan

Bahan

4

Alatan Diperlukan

2

CC0 Domain Awam

Blueprint ini dikeluarkan di bawah CC0. Anda bebas menyalin, mengubah, mengedar, dan menggunakan karya ini untuk sebarang tujuan, tanpa meminta kebenaran.

Sokong Pembuat dengan membeli produk melalui Blueprint mereka di mana mereka memperoleh Komisen Pembuat ditetapkan oleh Penjual, atau cipta iterasi baru Blueprint ini dan sertakan ia sebagai sambungan dalam Blueprint anda sendiri untuk berkongsi hasil.

Perbincangan

(0)

Log masuk untuk menyertai perbincangan

Memuatkan komen...