SENI
KECANTIKAN & KESEJAHTERAAN
KRAFTANGAN
BUDAYA & SEJARAH
HIBURAN
ALAM SEKITAR
MAKANAN & MINUMAN
KEJURUTERAAN TERBALIK
SAINS
SUKAN
TEKNOLOGI
BOLEH PAKAI

Bromide Paper: Gelatino-Bromide Emulsion Coated on Paper
Bromide paper is paper coated with silver bromide in gelatin, the printing and enlarging paper of the darkroom. Thorpe (1913) gives a beginner's emulsion: gelatin swelled in potassium bromide solution, silver nitrate made clear with strong ammonia, the two joined under ruby light, ripened, set, washed, and spread on paper as on a glass plate. From the moment the silver goes in, work only by ruby light. Grain and ounce figures are Thorpe's; the gram conversions and the 10-sheet batch are ours.
The picture: our own drawing.
Lanjutan
4 days
Arahan
1
1
Swell the gelatin
Swell the gelatin
Dissolve 185 grains (12.0 g) of potassium bromide in 5 oz (142 ml) of water. Cover 300 grains (19.4 g) of hard gelatin with it and stir until it softens and swells.
Bahan untuk langkah ini:
Kalium Bromida12 g
Serbuk gelatin19.4 gAlatan diperlukan:
Air
Bikar Kaca
Rod Pengacau Kaca
Neraca dua piring2
2
Dissolve the silver
Dissolve the silver
Dissolve 231 grains (15.0 g) of silver nitrate in 5 oz (142 ml) of water with gentle heat in the water bath. Add strong ammonia (0.880) a little at a time, stirring, until the precipitate that first forms dissolves again.
Bahan untuk langkah ini:
Perak Nitrat15 gAlatan diperlukan:
Air
Larutan Ammonia Pekat (0.880)
Bikar Kaca
Rod Pengacau Kaca
Periuk besar (bawah, untuk rendaman air)3
3
Melt the gelatin, never above 35 °C
Melt the gelatin, never above 35 °C
Stand both vessels in the pan of water, never above 35 °C, stirring, until the gelatin is perfectly liquid. Up to here ordinary light is fine.
Alatan diperlukan:
Periuk besar (bawah, untuk rendaman air)
Termometer
Rod Pengacau Kaca4
4
Add the silver under ruby light
Add the silver under ruby light
From now on, ruby light only. Pour the silver solution into the gelatin in a thin stream, stirring all the time. Rinse the silver beaker with about 1 oz (28 ml) of warm water into the emulsion.
Alatan diperlukan:
Lampu Selamat Delima
Bikar Kaca
Rod Pengacau Kaca
Air5
5
Ripen
Ripen
Leave the emulsion in the hot water for half to three-quarters of an hour.
Alatan diperlukan:
Periuk besar (bawah, untuk rendaman air)
Lampu Selamat Delima6
6
Set in the dark
Set in the dark
Pour it into a flat dish, put it in a light-tight box and let it set for at least 24 hours; two or three days is better.
Alatan diperlukan:
Dulang seramik cetek
Kotak Kedap Cahaya7
7
Wash through canvas
Wash through canvas
Scrape the set jelly onto wet coarse canvas and tie it into a bag. Knead it under water so it squeezes through in threads. Pour off the water, cover with fresh, wait 5 minutes and pour off: six to eight times.
Alatan diperlukan:
Sudip
Kain kanvas
Tali
Air
Lampu Selamat Delima8
8
Drain and store
Drain and store
Turn the threads onto a strainer covered with a cloth and let the water drain. Rinse with methylated spirit and keep in a lidded jar until coating.
Alatan diperlukan:
Penapis
Kain muslin
Alkohol ternyahasli
Balang Kaca Bertutup
Lampu Selamat Delima9
9
Coat the paper
Coat the paper
Melt the emulsion in the warm water bath. Lay a sheet of paper flat on a levelled glass slab. Pour emulsion on the middle to cover nearly half the sheet, and spread it to each end with a glass rod 2 inches wider than the sheet, held just off the surface.
Bahan untuk langkah ini:
Kertas10 helaianAlatan diperlukan:
Periuk besar (bawah, untuk rendaman air)
Kepingan kaca
Aras Cecair
Rod Pengacau Kaca
Lampu Selamat Delima10
10
Dry
Dry
When the coat has set, move the sheets to a rack in a drying box with a current of air. They dry in 12 to 48 hours. Keep them in the light-tight box.
Alatan diperlukan:
Para Pengering
Kotak Kedap CahayaBahan
4- 12 gPemegang Tempat
- 19.4 gPemegang Tempat
- 15 gPemegang Tempat
- 10 helaianPemegang Tempat
Alatan Diperlukan
20- Pemegang Tempat
- Pemegang Tempat
- Pemegang Tempat
- Pemegang Tempat
- Pemegang Tempat
- Pemegang Tempat
- Pemegang Tempat
- Pemegang Tempat
- Pemegang Tempat
- Pemegang Tempat
- Pemegang Tempat
- Pemegang Tempat
- Pemegang Tempat
- Pemegang Tempat
- Pemegang Tempat
- Pemegang Tempat
- Pemegang Tempat
- Pemegang Tempat
- Pemegang Tempat
- Pemegang Tempat
Blueprint ini membuat
Blueprint berkaitan
Blueprint ini berkongsi pengetahuan — teknik, bahan atau prinsip
CC0 Domain Awam
Blueprint ini dikeluarkan di bawah CC0. Anda bebas menyalin, mengubah, mengedar, dan menggunakan karya ini untuk sebarang tujuan, tanpa meminta kebenaran.
Sokong Pembuat dengan membeli produk melalui Blueprint mereka di mana mereka memperoleh Komisen Pembuat ditetapkan oleh Penjual, atau cipta iterasi baru Blueprint ini dan sertakan ia sebagai sambungan dalam Blueprint anda sendiri untuk berkongsi hasil.



