SENI
KECANTIKAN & KESEJAHTERAAN
KRAFTANGAN
BUDAYA & SEJARAH
HIBURAN
ALAM SEKITAR
MAKANAN & MINUMAN
KEJURUTERAAN TERBALIK
SAINS
SUKAN
TEKNOLOGI
BOLEH PAKAI
Charcoal Air Furnace for Crucibles, Drawn by a Chimney
Forge

Dicipta oleh

Forge

14. Oktober 2026NO
23
0
0
0
0

Charcoal Air Furnace for Crucibles, Drawn by a Chimney

The chemist's furnace for melting in crucibles needs no bellows: a firebrick box closed on every side, air entering only under the grate, and a tall chimney to draw it through the burning charcoal. George Fownes (1856) describes it; a sliding damper in the flue sets the heat, from dull red upward. The picture: a 16th-century assay workshop woodcut with wind furnaces, one on a tripod, for melting silver in crucibles (Deutsche Fotothek).
Pertengahan
Two days, plus drying

Arahan

1

Fireclay mortar

Mix fireclay and fine sand with water to a stiff, smooth mortar (our mix: about one part clay to one of sand).

Bahan untuk langkah ini:

Tanah Liat Tahan ApiTanah Liat Tahan Api10 kg
Pasir HalusPasir Halus10 kg
AirAir8 liter

Alatan diperlukan:

BaldiBaldi
Penyodok tanganPenyodok tangan
2

Ash pit and grate

Lay a level firebrick base and build a low ash pit with an opening at the front. Forge bars from wrought iron rod and set them across the top as the grate, a finger's width apart.

Bahan untuk langkah ini:

Bata Tahan ApiBata Tahan Api20 keping
Rod besi tempaRod besi tempa2 m

Alatan diperlukan:

Penyodok tanganPenyodok tangan
Aras CecairAras Cecair
Relau tukang besiRelau tukang besi
Tukul kepala baji lintangTukul kepala baji lintang
3

Fire box

Build a square box of firebricks on the grate, wide enough for a crucible with a hand's width of charcoal all round, and tall enough to cover it. Joint every brick thinly with the fireclay mortar.

Bahan untuk langkah ini:

Bata Tahan ApiBata Tahan Api40 keping

Alatan diperlukan:

Penyodok tanganPenyodok tangan
Aras CecairAras Cecair
4

Flue, chimney and damper

Lead a flue out near the top into a tall chimney pipe. Fit an iron sliding plate across the flue as a damper. Close the top with a loose firebrick lid.

Bahan untuk langkah ini:

Paip serombongPaip serombong1 keping
Kepingan besi (ditempa)Kepingan besi (ditempa)1 keping

Alatan diperlukan:

Penyodok tanganPenyodok tangan
5

Dry and first fire

Let the mortar dry for days, then light a small charcoal fire and raise it slowly over an hour or two so the joints do not crack.

Bahan untuk langkah ini:

ArangArang10 kg

Alatan diperlukan:

Sarung Tangan Tahan HabaSarung Tangan Tahan Haba
6

Draught from the chimney

Memuatkan buku nota Jupyter…
7

Limits

The principle and the damper are Fownes's; the sizes, the mortar mix and the draught formula's working figures are ours. Charcoal fires make carbon monoxide: work outdoors or under a good chimney.

Bahan

8

Alatan Diperlukan

6

Blueprint berkaitan

Blueprint ini berkongsi pengetahuan — teknik, bahan atau prinsip

CC0 Domain Awam

Blueprint ini dikeluarkan di bawah CC0. Anda bebas menyalin, mengubah, mengedar, dan menggunakan karya ini untuk sebarang tujuan, tanpa meminta kebenaran.

Sokong Pembuat dengan membeli produk melalui Blueprint mereka di mana mereka memperoleh Komisen Pembuat ditetapkan oleh Penjual, atau cipta iterasi baru Blueprint ini dan sertakan ia sebagai sambungan dalam Blueprint anda sendiri untuk berkongsi hasil.

Perbincangan

(0)

Log masuk untuk menyertai perbincangan

Memuatkan komen...