Kerjasama
SENI
KECANTIKAN & KESEJAHTERAAN
KRAFTANGAN
BUDAYA & SEJARAH
HIBURAN
ALAM SEKITAR
MAKANAN & MINUMAN
KEJURUTERAAN TERBALIK
SAINS
SUKAN
TEKNOLOGI
BOLEH PAKAI
Dust Mask: Rigid Perforated Guard with a Replaceable Cloth Filter (Swindell, US 2,681,060, 1954)
A simple dust mask for workshops and plants. A rigid cup with air holes covers the nose and mouth. A cloth filter lines the inside and folds over the cup's rim, held by wire clips: the air passes through the cloth, and the cloth also pads the rim against the face. Change the cloth and the same mask can pass from worker to worker.
Result: a nose-and-mouth dust mask with a filter you can replace.
Source: M. E. Swindell, US 2,681,060 (1954). Unknown: sizes, how the cup is formed, the cloth. Picture: the patent drawing.
Pemula
Unknown
Arahan
1
1
Make the guard
Make the guard
Make a rigid cup to cover the nose and mouth, of composition rubber, plastic, metal or another suitable material. Give it a narrow upright bulge at the front for the nose. Shape its edge to the face so it fits close at the bridge of the nose and the chin, and turn the whole edge outward as a curved lip. Make air holes in both the nose bulge and the mouth part. Not given: sizes, the number of holes, how it is formed.
Bahan untuk langkah ini:
Bahan tidak diketahui1 guardAlatan diperlukan:
Gerimit tangan
Dimensi tidak diketahui2
2
Fit the filter clips
Fit the filter clips
Bend several clips of springy wire and rivet them to the guard near its edge, so each can press down on the back of the lip. Ours: spring steel wire. Not given: how many clips.
Bahan untuk langkah ini:
Dawai keluli spring1 clips
Logam tidak diketahui1 rivetsAlatan diperlukan:
Playar hujung bulat
Set rivet3
3
Make the head strap
Make the head strap
Cut an elastic strap to go round the head and fit a hook at each end. The hooks catch in a pair of the guard's air holes. Not given: the length, the hook metal.
Bahan untuk langkah ini:
Tali getah1 strapLogam tidak diketahui1 two hooksAlatan diperlukan:
GuntingPlayar hujung bulat4
4
Fit the filter and wear it
Fit the filter and wear it
Lay a cup-shaped cloth filter in the hollow of the guard. Fold its edges over the lip and clamp them to the back of the lip with the clips. The cloth leaves an air space in front of the face and one between itself and the guard, and it pads the lip where it touches the face. Hook the strap into the holes and put the mask over the nose and mouth. Replace the cloth when it is used, or before the mask passes to another wearer. Not given: the cloth.
Bahan untuk langkah ini:
Kain tidak diketahui1 filterAlatan diperlukan:
GuntingBahan
5- 1 guardPemegang Tempat
- 1 clipsPemegang Tempat
- 1 two hooksPemegang Tempat
- 1 strapPemegang Tempat
- 1 filterPemegang Tempat
Bahan Blueprint Bersambung
Blueprint ini membuat
Blueprint berkaitan
Blueprint ini berkongsi pengetahuan — teknik, bahan atau prinsip
CC0 Domain Awam
Blueprint ini dikeluarkan di bawah CC0. Anda bebas menyalin, mengubah, mengedar, dan menggunakan karya ini untuk sebarang tujuan, tanpa meminta kebenaran.
Sokong Pembuat dengan membeli produk melalui Blueprint mereka di mana mereka memperoleh Komisen Pembuat ditetapkan oleh Penjual, atau cipta iterasi baru Blueprint ini dan sertakan ia sebagai sambungan dalam Blueprint anda sendiri untuk berkongsi hasil.