SENI
KECANTIKAN & KESEJAHTERAAN
KRAFTANGAN
BUDAYA & SEJARAH
HIBURAN
ALAM SEKITAR
MAKANAN & MINUMAN
KEJURUTERAAN TERBALIK
SAINS
SUKAN
TEKNOLOGI
BOLEH PAKAI
Machete to a Relief Specification
Forge

Dicipta oleh

Forge

11. Oktober 2026NO
19
0
0
0
0

Machete to a Relief Specification

Machete blades are typically 30–66 cm long and under 3 mm thick. The Red Cross and Red Crescent emergency catalogue sets out what a sound one must be: a 55 cm machete with a 2.5 mm blade of hot-forged carbon steel, 0.6–0.65 % carbon and 0.6–0.8 % manganese, hardened and tempered to 45–50 Rockwell C near the edge, the whole blade hardened but the tang left normalised past the first rivet hole. The wooden handle is keyed into three grooves in the tang and held by three steel rivets with washers.
Lanjutan
Factory process

Arahan

1

Forge the blade

Hot-forge the carbon steel to the blade shape, 2.5 mm thick, with three grooves along the tang for the handle.

Bahan untuk langkah ini:

Bilet keluli karbon tinggiBilet keluli karbon tinggi1 keping

Alatan diperlukan:

Relau tukang besiRelau tukang besi
Tukul jatuhTukul jatuh
2

Harden and temper

Harden and temper the whole blade to 45–50 HRC near the edge, leaving the tang normalised beyond the first rivet hole.

Alatan diperlukan:

Relau tukang besiRelau tukang besi
Penguji kekerasan RockwellPenguji kekerasan Rockwell
3

Fit the handle

Fit the wooden handle into the grooves and fix it with three steel rivets and washers.

Bahan untuk langkah ini:

Batang Kayu Keras untuk HuluBatang Kayu Keras untuk Hulu1 keping
Rivet keluliRivet keluli3 keping
Sesendal RataSesendal Rata3 keping
4

Check

Check the edge for dents and the hardness near the edge.

Alatan diperlukan:

Penguji kekerasan RockwellPenguji kekerasan Rockwell

Bahan

4

Alatan Diperlukan

3

Blueprint ini membuat

Blueprint berkaitan

Blueprint ini berkongsi pengetahuan — teknik, bahan atau prinsip

CC0 Domain Awam

Blueprint ini dikeluarkan di bawah CC0. Anda bebas menyalin, mengubah, mengedar, dan menggunakan karya ini untuk sebarang tujuan, tanpa meminta kebenaran.

Sokong Pembuat dengan membeli produk melalui Blueprint mereka di mana mereka memperoleh Komisen Pembuat ditetapkan oleh Penjual, atau cipta iterasi baru Blueprint ini dan sertakan ia sebagai sambungan dalam Blueprint anda sendiri untuk berkongsi hasil.

Perbincangan

(0)

Log masuk untuk menyertai perbincangan

Memuatkan komen...