SENI
KECANTIKAN & KESEJAHTERAAN
KRAFTANGAN
BUDAYA & SEJARAH
HIBURAN
ALAM SEKITAR
MAKANAN & MINUMAN
KEJURUTERAAN TERBALIK
SAINS
SUKAN
TEKNOLOGI
BOLEH PAKAI
Grosgrain Ribbon: Close Plain Weave with a Heavy Weft
Grosgrain is a firm, closely woven plain weave with a heavier weft than warp, which gives it ribs running across the width. It is used for hat bands, facings and waistbands. Historically it was silk or wool; this one is cotton, woven narrow on a rigid heddle loom.
The picture: grosgrain ribbons (Wikimedia Commons).
Pertengahan
Two evenings
Arahan
1
1
The thread and twine
The thread and twine
Spinning the fine warp thread and the heavier twine used as weft.
2
2
Measure the warp
Measure the warp
For a ribbon 2.5 cm wide and 3 m long, wind enough fine warp threads to fill 2.5 cm of the heddle, each 3.5 m long to allow for tying on and loom waste.
Bahan untuk langkah ini:
Benang Lungsin Kapas1 as requiredAlatan diperlukan:
Papan pengani
Pita Ukur
Pembaris3
3
Thread the heddle
Thread the heddle
Centre the warp in the heddle, one end through each slot and each hole, wind on under even tension and tie on at the front.
Alatan diperlukan:
Kek tenun sikat tegar4
4
Weave with a heavy weft
Weave with a heavy weft
Wind the twine on the shuttle. Weave plain weave: one pass with the heddle up, one with it down, and beat each pick firmly so the weave is close and the heavy weft forms ribs across the ribbon.
Bahan untuk langkah ini:
Tali Kapas1 as requiredAlatan diperlukan:
Kek tenun sikat tegar
Torak tenun5
5
Keep the edges straight
Keep the edges straight
Draw each pick snug at the edges so the ribbon keeps its width; measure the width often.
Alatan diperlukan:
Pembaris6
6
Cut off and secure
Cut off and secure
Cut the ribbon off the loom and knot or stitch both ends so the weft cannot slip off.
Alatan diperlukan:
Gunting kain7
7
Troubleshooting
Troubleshooting
Grosgrain troubleshooting.
Flow
Loading...
Bahan
2- 1 as requiredPemegang Tempat
- 1 as requiredPemegang Tempat
Blueprint ini membuat
Blueprint berkaitan
Blueprint ini berkongsi pengetahuan — teknik, bahan atau prinsip
CC0 Domain Awam
Blueprint ini dikeluarkan di bawah CC0. Anda bebas menyalin, mengubah, mengedar, dan menggunakan karya ini untuk sebarang tujuan, tanpa meminta kebenaran.
Sokong Pembuat dengan membeli produk melalui Blueprint mereka di mana mereka memperoleh Komisen Pembuat ditetapkan oleh Penjual, atau cipta iterasi baru Blueprint ini dan sertakan ia sebagai sambungan dalam Blueprint anda sendiri untuk berkongsi hasil.