SENI
KECANTIKAN & KESEJAHTERAAN
KRAFTANGAN
BUDAYA & SEJARAH
HIBURAN
ALAM SEKITAR
MAKANAN & MINUMAN
KEJURUTERAAN TERBALIK
SAINS
SUKAN
TEKNOLOGI
BOLEH PAKAI
Lidded Storage Jar: a Coil-Built Pot with a Fitted Flanged Lid
Fired clay does not rust, react with salts or let light through, which is why herbs, pigments and remedies were kept in clay jars. This is our coil pot with a straight neck and a lid that sits inside it on a flange, made from the same clay at the same time so both shrink alike.
The picture: a lidded earthenware jar with a horn handle, Korea, Silla or Kaya period (Cleveland Museum of Art).
Pertengahan
A week with drying and firing
Arahan
1
1
Wedge the clay
Wedge the clay
Wedge about 3 kg of clay body for the jar and its lid together, so both come from the same batch (the amount is ours, for a jar about 15 cm tall).
Bahan untuk langkah ini:
Badan tanah liat tukang tembikar3 kgAlatan diperlukan:
Alas kanvas untuk tembikar
Pisau2
2
Build the jar
Build the jar
Build a coil pot as in the coil pot blueprint, but bring the neck up straight and finish the rim level all round, so a lid can sit on it.
3
3
Make the lid
Make the lid
While the jar is still soft, roll a disc a little wider than the mouth. Measure the inside of the neck and add a coil ring underneath the disc that just fits inside it: the flange that keeps the lid from sliding. Score, slip and join it, and add a knob on top.
Bahan untuk langkah ini:
Slip tembikar (tanah liat cair)1 as requiredAlatan diperlukan:
Alas kanvas untuk tembikar
Alat penggores tanah liat
Set perkakas tanah liatPisau4
4
Fit at leather-hard
Fit at leather-hard
When jar and lid are both leather-hard, try the lid in place and pare the flange or rim until it seats without rocking. Smooth both with a damp sponge.
Alatan diperlukan:
Set perkakas tanah liat
Set span tembikar5
5
Dry and fire together
Dry and fire together
Dry them slowly to bone-dry, the lid off the jar, and fire them in the same pit firing as the coil pot, so they shrink alike.
Bahan untuk langkah ini:
Kayu Api1 as requiredAlatan diperlukan:
PenyodokBahan
3- Pemegang Tempat
- 1 as requiredPemegang Tempat
- 1 as requiredPemegang Tempat
Blueprint ini membuat
Blueprint berkaitan
Blueprint ini berkongsi pengetahuan — teknik, bahan atau prinsip
CC0 Domain Awam
Blueprint ini dikeluarkan di bawah CC0. Anda bebas menyalin, mengubah, mengedar, dan menggunakan karya ini untuk sebarang tujuan, tanpa meminta kebenaran.
Sokong Pembuat dengan membeli produk melalui Blueprint mereka di mana mereka memperoleh Komisen Pembuat ditetapkan oleh Penjual, atau cipta iterasi baru Blueprint ini dan sertakan ia sebagai sambungan dalam Blueprint anda sendiri untuk berkongsi hasil.