SENI
KECANTIKAN & KESEJAHTERAAN
KRAFTANGAN
BUDAYA & SEJARAH
HIBURAN
ALAM SEKITAR
MAKANAN & MINUMAN
KEJURUTERAAN TERBALIK
SAINS
SUKAN
TEKNOLOGI
BOLEH PAKAI
Masher, Pounder and Mincer: Three Kitchen Tools on One Handle
A masher, a steak pounder and a mincing knife are three tools to buy and store.
Jacob J. Diehl of York, Pennsylvania, received US 93,862, dated 17 August 1869, for a kitchen utensil combining "a vegetable-masher, steak-pounder, and mincing-knife": an ordinary masher with a plate of pyramidal teeth fixed to its foot, and a mincing knife whose shank passes through the handle and is fastened by a nut, its back resting in a groove between two rows of teeth.
This rung compares head weights, then prints the toothed head, fits a knife from spring steel, and uses the tool three ways.
Pertengahan
About 2 hours, plus printing
Arahan
1
1
Head weight and blow
Head weight and blow
Memuatkan buku nota Jupyter…
2
2
A masher before it
A masher before it
The embedded blueprint mashes with a wire coil. Diehl's masher is solid, with teeth to pound and a knife to mince.
3
3
Read US 93,862
Read US 93,862
"D is the mincing-knife, provided with a shank, a, which passes through the handle A. The back of the knife rests in a groove in the plate C, between two rows of the teeth, and is secured by a nut, b, screwed on to the shank a, or by equivalent means. This knife is preferably detached, when the implement is in use as a masher or pounder."
4
4
Print the head
Print the head
Print the head with its toothed face, groove and socket (/uploads/blueprints/masher-pounder-mincer-head.stl) at 100 % infill for weight. Print in PETG at 0.2 mm layers, 30 % infill, 4 walls; wash before first use.
Bahan untuk langkah ini:
Filamen PETG1 kepingAlatan diperlukan:
Pencetak 3D filamen (FDM)5
5
Make the knife
Make the knife
Cut a crescent 56 mm across from spring steel strip and file its curved edge sharp. Epoxy a 5 mm steel rod, threaded at its end with the die, to the middle of its back as the shank, 230 mm long.
Bahan untuk langkah ini:
Jalur keluli spring1 keping
Bar Bulat Keluli Lembut1 keping
Epoksi dua komponen1 kepingAlatan diperlukan:
Gunting kepingan logam
Kikir (Kikir Tangan)
Batu asah
Ragum Bangku
Set pemotong ulir
Sarung Tangan Kerja Kulit
Cermin Mata Keselamatan Jernih6
6
Handle and nut
Handle and nut
Drill a hardwood dowel through its length for the 5 mm shank, epoxy it into the head's socket, pass the shank up through, and hold it with a nut at the top.
Bahan untuk langkah ini:
Pasak kayu keras1 kepingEpoksi dua komponen1 keping
Nat Heksagon1 kepingAlatan diperlukan:
Gerudi Tanpa Wayar
Set Mata Gerudi
Sepana boleh laras7
7
The build in 3D
The build in 3D
FreeCAD model of this build, not of the patent: the head with its pyramidal teeth and knife groove, the crescent knife with its back in the groove, the shank through the handle, and the handle.
8
8
Use it three ways
Use it three ways
With the knife off, mash boiled potatoes, then pound a cabbage leaf flat on the board with the teeth. Refit the knife and mince an onion. Time each.
Bahan untuk langkah ini:
Kentang1 keping
Kubis1 keping
Bawang besar1 keping
Air1 kepingAlatan diperlukan:
Periuk berdinding tinggi
Bakalan papan pemotong kayu mapel
Mangkuk adun keluli tahan karat (besar)
Jam Randik9
9
A knife that wobbles, teeth that clog
A knife that wobbles, teeth that clog
Masher, pounder and mincer troubleshooting.
Flow
Loading...
10
10
History and honest limits
History and honest limits
**Jacob J. Diehl** of York, Pennsylvania, received US 93,862, dated 17 August 1869. The masher is of ordinary form with a plate or metallic block of pyramidal teeth fixed to it; the knife need not be removed when mashing. He did not claim combining a cleaver and steak pounder, which was known, but the detachable knife through the handle and its fit in the plate.
**Honest limits.** A printed head stands in for wood and metal, and is lighter than cast iron. FDM prints hold food in their layer lines, so wash well and replace when worn. Your times are the result.
Bahan
10- 1 kepingPemegang Tempat
- 1 kepingPemegang Tempat
- 1 kepingPemegang Tempat
- 2 kepingPemegang Tempat
- 1 kepingPemegang Tempat
- 1 kepingPemegang Tempat
- 1 kepingPemegang Tempat
- 1 kepingPemegang Tempat
- 1 kepingPemegang Tempat
- 1 kepingPemegang Tempat
Alatan Diperlukan
15- Pemegang Tempat
- Pemegang Tempat
- Pemegang Tempat
- Pemegang Tempat
- Pemegang Tempat
- Pemegang Tempat
- Pemegang Tempat
- Pemegang Tempat
- 1 vendor sell this, none ship to you yetPemegang Tempat
- Pemegang Tempat
- Pemegang Tempat
- Pemegang Tempat
- Pemegang Tempat
- Pemegang Tempat
- Pemegang Tempat
Fail reka bentuk
1Blueprint ini membuat
Blueprint berkaitan
Blueprint ini berkongsi pengetahuan — teknik, bahan atau prinsip
CC0 Domain Awam
Blueprint ini dikeluarkan di bawah CC0. Anda bebas menyalin, mengubah, mengedar, dan menggunakan karya ini untuk sebarang tujuan, tanpa meminta kebenaran.
Sokong Pembuat dengan membeli produk melalui Blueprint mereka di mana mereka memperoleh Komisen Pembuat ditetapkan oleh Penjual, atau cipta iterasi baru Blueprint ini dan sertakan ia sebagai sambungan dalam Blueprint anda sendiri untuk berkongsi hasil.