SENI
KECANTIKAN & KESEJAHTERAAN
KRAFTANGAN
BUDAYA & SEJARAH
HIBURAN
ALAM SEKITAR
MAKANAN & MINUMAN
KEJURUTERAAN TERBALIK
SAINS
SUKAN
TEKNOLOGI
BOLEH PAKAI
Yielding-Disk Potato Masher: A Perforated Disk That Rocks to the Mash
A rigid masher meets lumpy potatoes with its flat face tilted, and mashes only what it touches.
Alfred H. Lorton of New York received US 33,654, dated 5 November 1861, for a mashing utensil "comprised, practically, in a perforated disk provided with a suitable handle," best joined to the handle by an elastic or yielding medium — a core and sleeve of india-rubber — "so that the disk will be permitted to oscillate on the end of the handle in any direction, and thus accommodate itself to the inequalities of surface" of the mass.
This rung works out the disk's open area, then prints the disk and handle, joins them with a silicone core and sleeve, and mashes a pan of potatoes with the joint and without it.
Pemula
About 1 hour, plus printing
Arahan
1
1
Open area of the disk
Open area of the disk
Memuatkan buku nota Jupyter…
2
2
Crushing by hand before it
Crushing by hand before it
The embedded blueprint crushes with a solid pestle. Lorton perforates the face so the mash passes through, and lets it tilt.
3
3
Read US 33,654
Read US 33,654
"The perforations may be of any desired form; but I prefer to have them round, as the instrument is more readily cleared when the holes in the disk present no sharp corners."
"The instrument, though answering a very good purpose when made rigid, as last above mentioned, will not act so satisfactorily as when constructed so as to yield, as first above set forth."
4
4
Print the disk and handle
Print the disk and handle
Print the perforated disk with its socket (/uploads/blueprints/yielding-disk-potato-masher-disk.stl) and the handle with its socket (/uploads/blueprints/yielding-disk-potato-masher-handle.stl). Print in PETG at 0.2 mm layers, 30 % infill, 4 walls; wash before first use.
Bahan untuk langkah ini:
Filamen PETG1 kepingAlatan diperlukan:
Pencetak 3D filamen (FDM)5
5
Make the rubber core
Make the rubber core
Cut 34 mm of thick silicone tubing that fills both 15 mm sockets. Push it half into each socket and pin it through each with a 3 mm steel pin.
Bahan untuk langkah ini:
Tiub Silikon1 keping
Bar Bulat Keluli Lembut1 kepingAlatan diperlukan:
Pisau Kraf
Angkup Digital 6 Inci6
6
Fit the sleeve
Fit the sleeve
Slide a 30 mm sleeve of wider silicone tubing over both sockets and bind each end tightly with stainless wire.
Bahan untuk langkah ini:
Tiub Silikon1 keping
Dawai keluli tahan karat1 kepingAlatan diperlukan:
Playar Muncung RataPisau Kraf7
7
The patent drawing
The patent drawing
US 33,654 drawing sheet, public domain (expired patent).
8
8
Cook the potatoes
Cook the potatoes
Boil 500 g of potatoes, peeled and quartered, in salted water for about 20 minutes until a knife slides in; drain.
Bahan untuk langkah ini:
Kentang1 keping
Air1 kepingAlatan diperlukan:
Periuk berdinding tinggi
Penimbang Dapur Digital9
9
Mash: yielding against rigid
Mash: yielding against rigid
Mash half the potatoes with the joint free and time it to no lumps. Wrap the joint stiff with tape, mash the other half, and compare.
Alatan diperlukan:
Mangkuk adun keluli tahan karat (besar)
Jam Randik10
10
A disk that clogs, flops or comes off
A disk that clogs, flops or comes off
Yielding-disk potato masher troubleshooting.
Flow
Loading...
11
11
History and honest limits
History and honest limits
**Alfred H. Lorton** of New York received US 33,654, dated 5 November 1861. In its simplest form the handle is driven into a socket on the disk; the yielding form uses a rubber core pinned into both sockets and a rubber sleeve wired round them, with a false bottom to protect the core. He named potatoes, turnips and other vegetables.
**Honest limits.** Printed PETG and silicone tubing stand in for his metal and india-rubber; FDM prints hold food in their layer lines, so wash well and replace when worn. Your times are the result.
Bahan
6- 1 kepingPemegang Tempat
- 2 kepingPemegang Tempat
- 1 kepingPemegang Tempat
- 1 kepingPemegang Tempat
- 1 kepingPemegang Tempat
- 1 kepingPemegang Tempat
Alatan Diperlukan
8- Pemegang Tempat
- Pemegang Tempat
- Pemegang Tempat
- Pemegang Tempat
- Pemegang Tempat
- Pemegang Tempat
- Pemegang Tempat
- Pemegang Tempat
Blueprint ini membuat
Blueprint berkaitan
Blueprint ini berkongsi pengetahuan — teknik, bahan atau prinsip
CC0 Domain Awam
Blueprint ini dikeluarkan di bawah CC0. Anda bebas menyalin, mengubah, mengedar, dan menggunakan karya ini untuk sebarang tujuan, tanpa meminta kebenaran.
Sokong Pembuat dengan membeli produk melalui Blueprint mereka di mana mereka memperoleh Komisen Pembuat ditetapkan oleh Penjual, atau cipta iterasi baru Blueprint ini dan sertakan ia sebagai sambungan dalam Blueprint anda sendiri untuk berkongsi hasil.