SENI
KECANTIKAN & KESEJAHTERAAN
KRAFTANGAN
BUDAYA & SEJARAH
HIBURAN
ALAM SEKITAR
MAKANAN & MINUMAN
KEJURUTERAAN TERBALIK
SAINS
SUKAN
TEKNOLOGI
BOLEH PAKAI
Spiral-Mouth Gatherer Churn: A Slotted Cylinder Swallows the Butter, Geared Dashes Churn Below
Moses Byard of Milan, Indiana, received US 18,384, dated 13 October 1857, for a hollow cylindrical "gatherer" on the churn's shaft, with a spiral mouth in one side and narrow slots round it; a cog wheel on the shaft drives pinions carrying dashes. Turning, the gatherer takes the butter in through its mouth while the buttermilk escapes through the slots.
This rung prints the gatherer, head, wheel and pinions, builds the churn and makes butter.
Pertengahan
About 4 hours, plus printing
Arahan
1
1
Wheel and pinions
Wheel and pinions
Memuatkan buku nota Jupyter…
2
2
A churn that also gathers, before it
A churn that also gathers, before it
The Cowleses gather by turning both beater sets together; Byard by a slotted cylinder that swallows the butter.
3
3
Read US 18,384
Read US 18,384
"As soon as the butter is churned, it is collected by the revolutions of the 'gatherer' B, into its interior through the spiral opening a; and the buttermilk that is separated from it is allowed to escape through the openings b, b."
4
4
Print the parts
Print the parts
Print the gatherer (/uploads/blueprints/spiral-mouth-gatherer-churn-gatherer.stl), its removable head (/uploads/blueprints/spiral-mouth-gatherer-churn-head.stl), the cog wheel (/uploads/blueprints/spiral-mouth-gatherer-churn-cog-wheel.stl) and three pinions (/uploads/blueprints/spiral-mouth-gatherer-churn-pinion.stl). Print in PETG at 0.2 mm layers, 30 % infill, 4 walls; wash before first use.
Bahan untuk langkah ini:
Filamen PETG1 kepingAlatan diperlukan:
Pencetak 3D filamen (FDM)5
5
Shafts and gatherer
Shafts and gatherer
Run a 10 mm square hardwood shaft through a square food-grade container about 220 mm across, the gatherer and its head on it, the cog wheel fixed to the gatherer's end. Below it run three more 10 mm square shafts, each with a pinion meshing the wheel and a hardwood lath fixed along it as the dash.
Bahan untuk langkah ini:
Bekas simpanan gred makanan1 keping
Pasak kayu keras1 keping
Gam Kayu1 keping
Pengedap Silikon1 kepingAlatan diperlukan:
Gergaji Tangan
Gerudi Tanpa Wayar
Set Mata Gerudi6
6
Crank
Crank
Seal the shafts where they pass the walls with food-safe silicone and glue a pine crank arm and handle on the main shaft.
Bahan untuk langkah ini:
Papan pain1 kepingPasak kayu keras1 kepingGam Kayu1 kepingAlatan diperlukan:
Gergaji TanganGerudi Tanpa Wayar7
7
The build in 3D
The build in 3D
FreeCAD model of this build: the box cut away to show the gatherer on its shaft, the cog wheel at its end and the three pinions and dash shafts below.
8
8
Churn, then gather
Churn, then gather
Let the heavy cream stand until it reaches about 15 °C, checked with the thermometer. Pour in 2 litres. Crank steadily; time until the butter comes. Crank on slowly so the gatherer takes the butter in; lift it out and slide off its head to empty it. Pour off the buttermilk, add cold water, churn a little and pour off again until it runs clear; work in a pinch of salt and weigh the butter.
Bahan untuk langkah ini:
Krim pekat2000 ml
Garam Laut Kasar1 keping
Air1 kepingAlatan diperlukan:
Termometer prob kekal
Jam Randik
Penimbang Dapur Digital
Mangkuk adun keluli tahan karat (besar)9
9
Troubleshooting
Troubleshooting
Spiral-mouth gatherer troubleshooting.
Flow
Loading...
10
10
History and honest limits
History and honest limits
**Moses Byard** of Milan, Ripley County, Indiana, US 18,384, 13 October 1857, signed 28 July 1857. He made the slots long and narrow, running round the cylinder, "to keep them from being filled or clogged with the butter." He claimed the cylindrical vessel with a spiral mouth and slots. A container and printed parts stand in for his. FDM prints hold food in their layer lines, so wash well and replace when worn.
Bahan
9- 1 kepingPemegang Tempat
- 1 kepingPemegang Tempat
- 1 kepingPemegang Tempat
- 2 kepingPemegang Tempat
- 1 kepingPemegang Tempat
- 1 kepingPemegang Tempat
- 2000 mlPemegang Tempat
- 1 kepingPemegang Tempat
- 1 kepingPemegang Tempat
Alatan Diperlukan
8- Pemegang Tempat
- Pemegang Tempat
- 1 vendor sell this, none ship to you yetPemegang Tempat
- Pemegang Tempat
- Pemegang Tempat
- Pemegang Tempat
- Pemegang Tempat
- Pemegang Tempat
Fail reka bentuk
1Blueprint ini membuat
Blueprint berkaitan
Blueprint ini berkongsi pengetahuan — teknik, bahan atau prinsip
Counter-Turning Curved Beater Churn: Two Beater Sets Turn Opposite Ways, Then Together to Gather
oleh Millie
MAKANAN & MINUMAN
37
0
0
0
0
0
Diamond-Breaker Scroll Dasher Churn: A Wheel in Rising Sections Throws the Cream Up and Out
oleh Spindle
Kerja Kayu
28
0
0
0
0
0
Churning Butter from Cream — The 5,000-Year-Old Fat Separation
oleh TheChef
KRAFTANGAN
50
0
0
0
0
0
CC0 Domain Awam
Blueprint ini dikeluarkan di bawah CC0. Anda bebas menyalin, mengubah, mengedar, dan menggunakan karya ini untuk sebarang tujuan, tanpa meminta kebenaran.
Sokong Pembuat dengan membeli produk melalui Blueprint mereka di mana mereka memperoleh Komisen Pembuat ditetapkan oleh Penjual, atau cipta iterasi baru Blueprint ini dan sertakan ia sebagai sambungan dalam Blueprint anda sendiri untuk berkongsi hasil.