SENI
KECANTIKAN & KESEJAHTERAAN
KRAFTANGAN
BUDAYA & SEJARAH
HIBURAN
ALAM SEKITAR
MAKANAN & MINUMAN
KEJURUTERAAN TERBALIK
SAINS
SUKAN
TEKNOLOGI
BOLEH PAKAI
Worm-Drive Hose Clamp: North & Burke, 1945
Edwin W. North and William O. Burke of the National Lock Company, Rockford, Illinois, patented this hose clamp in 1945, US 2,386,629, for hoses carrying compressed air, gasoline and other fluids in aircraft. A band of resilient spring steel is pierced with a row of slanted slots, which a stamping operation can make, set at the angle of the screw thread. A U-shaped saddle is spot welded near one end of the band, and a housing riveted to it holds a screw whose thread runs through the slots. Turning the screw draws the band tight. One clamp fits a wide range of hose sizes.
Pertengahan
Factory process
Arahan
1
1
Slot the band
Slot the band
Stamp a row of transverse slots along the spring steel band, inclined to match the spiral thread of the screw.
Bahan untuk langkah ini:
Jalur keluli spring1 as requiredAlatan diperlukan:
Mesin penekan tebuk2
2
Saddle
Saddle
Spot weld the U-shaped saddle, its base curved along the band, near the band's inner end. The band is set up by the base's thickness so the base's curved inner surface continues the band's.
Bahan untuk langkah ini:
Pelana pengapit hos1 kepingAlatan diperlukan:
Mesin kimpalan bintik3
3
Screw and housing
Screw and housing
Lay the screw, with its continuous spiral thread, in the saddle with its reduced ends in the slots of the housing's end walls. Fit the housing over it: the prongs on the saddle's side walls pass through openings in the housing's flanges and are riveted over to fix them together.
Bahan untuk langkah ini:
Skru cacing pengapit hos1 keping
Perumah skru pengapit hos1 keping4
4
Fit
Fit
Pass the band's free end round the hose and under the screw: the thread engages the slots, and turning the screw draws the band tight.
Bahan
4- 1 as requiredPemegang Tempat
- 1 kepingPemegang Tempat
- 1 kepingPemegang Tempat
- 1 kepingPemegang Tempat
Alatan Diperlukan
2- Pemegang Tempat
- Mesin kimpalan bintik10% komisenPemegang Tempat
Blueprint ini membuat
Blueprint berkaitan
Blueprint ini berkongsi pengetahuan — teknik, bahan atau prinsip
CC0 Domain Awam
Blueprint ini dikeluarkan di bawah CC0. Anda bebas menyalin, mengubah, mengedar, dan menggunakan karya ini untuk sebarang tujuan, tanpa meminta kebenaran.
Sokong Pembuat dengan membeli produk melalui Blueprint mereka di mana mereka memperoleh Komisen Pembuat ditetapkan oleh Penjual, atau cipta iterasi baru Blueprint ini dan sertakan ia sebagai sambungan dalam Blueprint anda sendiri untuk berkongsi hasil.