IṢẸ́ ỌNÀ
ẸWÀ ÀTI ÌLERA
IṢẸ́ ỌWỌ́
ÀṢÀ ÀTI ÌTÀN
ÌṢERÉ
ÀYÍKÁ
OÚNJẸ ÀTI OHUN MÍMU
REVERSE ENGINEERING
SÁYẸ́ǸSÌ
ERÉ ÌDÁRAYÁ
ÌMỌ̀-Ẹ̀RỌ
ÀWỌN OHUN WÍWỌ̀
Bouncing Putty
Clay

Ṣẹ́dá nipasẹ̀

Clay

22. Oṣù Kẹsàn 2026DK
0
0
0
0
0

Bouncing Putty

Looking for a synthetic rubber during the Second World War, James Wright at General Electric heated silicone oil with boric acid. The result was no rubber: it bounced, shattered under a hammer, stretched like toffee when pulled slowly and slumped into a puddle overnight. Nobody found an industrial use; in 1950 it was sold as a toy. **US 2,541,851**, "Process for making puttylike elastic plastic, siloxane derivative composition containing zinc hydroxide", Wright, assigned to General Electric, filed 23. December 1944, granted 13. February 1951: liquid dimethylsiloxane heated with 5 to 25 % by weight of a boron compound such as boric acid or borax. **You measure both of its lives**: how high it bounces, how fast it flows, and where one turns into the other.
Olùbẹ̀rẹ̀
1 hour plus a day of slumping

Ìlànà

1

Weigh a ball

Weigh out 20 g of bouncing putty and roll it into a smooth ball between your palms.

Àwọn ohun èlò fún ìgbésẹ̀ yìí:

Amọ̀ tí ń fòAmọ̀ tí ń fò20 g

Àwọn irinṣẹ́ tí a nílò:

Òṣùwọ̀n Díjítà PípéÒṣùwọ̀n Díjítà Pípé
2

Bounce it

Tape a tape measure up a wall. Drop the ball from 1.0 m onto a hard floor five times, filming in slow motion, and read each rebound height.

Àwọn ohun èlò fún ìgbésẹ̀ yìí:

Tépù ìbòmọ́lẹ̀Tépù ìbòmọ́lẹ̀1 ìyípo

Àwọn irinṣẹ́ tí a nílò:

Okùn Ìdíwọ̀nOkùn Ìdíwọ̀n
Ẹ̀rọ Ìbánisọ̀rọ̀ Tí Ó Ní Fídíò Ọ̀lọ́raẸ̀rọ Ìbánisọ̀rọ̀ Tí Ó Ní Fídíò Ọ̀lọ́ra
3

Pull slow, pull fast

Roll a 10 mm thick rope. Pull one over 10 seconds: it strings out. Pull another sharply: it snaps with a clean face. Try pull times in between and note the fastest pull that still stretches.

Àwọn irinṣẹ́ tí a nílò:

Aago ÌdúróAago Ìdúró
Ìlà irinÌlà irin
4

Strike it

Glasses on. Set a ball on a hard surface and hit it once, sharply, with the mallet. It cracks rather than squashing. Squash another slowly with your thumb.

Àwọn irinṣẹ́ tí a nílò:

Òòlù rọ́bàÒòlù rọ́bà
Gílásì Ààbò Tí Ó Mọ́Gílásì Ààbò Tí Ó Mọ́
5

Let it slump

Re-roll the 20 g ball and set it on wax paper on a level surface. Measure its diameter now and after 10, 30, 60 and 180 minutes and 24 hours.

Àwọn ohun èlò fún ìgbésẹ̀ yìí:

Bébà oníìdàBébà oníìdà1 ewé

Àwọn irinṣẹ́ tí a nílò:

Òṣùwọ̀n Kálípà Díjítà Ìnṣì 6Òṣùwọ̀n Kálípà Díjítà Ìnṣì 6
6

Deborah numbers

Ń ṣí ìwé Jupyter…
7

History & Context

**What the patent specifies:** liquid dimethylsiloxane heated with 5–25 % of a boron compound until putty-like. **Modern build (derived):** commercial bouncing putty, measured. It became a famous toy and a staple of physics teaching about materials that are neither simply solid nor simply liquid. Its limits: it picks up dirt, will not hold a shape, and flows out of any container that is not closed.

Àwọn ohun-èlò

3

Àwọn irinṣẹ́ tó nílò

8

Blueprint tó jọra

Àwọn blueprint wọ̀nyí pín ìmọ̀ — ọ̀nà, ohun-èlò tàbí ìlànà

CC0 Àgbègbè Gbogbogbò

Blueprint yìí ti jáde lábẹ́ CC0. O lè ṣe àdàkọ, yí padà, pín, àti lò láìsí ìyọ̀ǹda.

Ṣàtìlẹ́yìn Olùṣẹ́dá nípa rírà àwọn ọjà nipasẹ̀ Blueprint wọn Ẹ̀san Olùṣẹ́dá tí àwọn Olùtajà gbé kalẹ̀, tàbí ṣẹ̀dá àtúnṣe tuntun ti Blueprint yìí kí o sì fi sínú Blueprint rẹ gẹ́gẹ́ bí ìsopọ̀ láti pín owó-wíwọlé.

Ìfọ̀rọ̀wérọ̀

(0)

Wọlé láti dara pọ̀ mọ́ ìfọ̀rọ̀wérọ̀

Ń gbé àwọn ọ̀rọ̀ wọlé...