IṢẸ́ ỌNÀ
ẸWÀ ÀTI ÌLERA
IṢẸ́ ỌWỌ́
ÀṢÀ ÀTI ÌTÀN
ÌṢERÉ
ÀYÍKÁ
OÚNJẸ ÀTI OHUN MÍMU
REVERSE ENGINEERING
SÁYẸ́ǸSÌ
ERÉ ÌDÁRAYÁ
ÌMỌ̀-Ẹ̀RỌ
ÀWỌN OHUN WÍWỌ̀

Extension Spring Wound by Hand with Hooked Ends
An extension spring works in tension: its coils touch at rest and open as it is pulled, and a hook or eye at each end takes the load. Wind spring wire tightly round a rod with every turn touching the last, bend up a hook at each end, and relieve the winding stress with gentle heat.
The picture: our diagram of the close-wound body and its hooks.
Àárín
An hour
Ìlànà
1
1
Wind the body
Wind the body
Clamp the end of the wire with the rod in the vise. Turn the rod by hand, guiding the wire so each turn lies tight against the last, until the body is long enough (step 5). Wear gloves and glasses: the wire springs.
Àwọn ohun èlò fún ìgbésẹ̀ yìí:
Okùn irin kámánì1 mÀwọn irinṣẹ́ tí a nílò:
Ọ̀pá irin róbótó
Ìdìmú Tábìlì
Ìbọ̀wọ́ Iṣẹ́ Awọ
Gíláàsì ààbò2
2
Cut and release
Cut and release
Hold the wire end, cut it leaving a tail for the hook, and let the coil unwind gently off the rod.
Àwọn irinṣẹ́ tí a nílò:
Ẹ̀mú ìgé okùn oníkọ̀rọ̀
Ìbọ̀wọ́ Iṣẹ́ Awọ
Gíláàsì ààbò3
3
Form the hooks
Form the hooks
With the pliers, bend the last turn at each end up square to the body and close it into a hook or loop in line with the axis.
Àwọn irinṣẹ́ tí a nílò:
Ẹmú Ẹnu Pẹrẹsẹ4
4
Relieve and check
Relieve and check
Warm the spring gently in the oven to relieve the winding stress, let it cool, and check that the coils close up again when it is released.
Àwọn irinṣẹ́ tí a nílò:
Ààrò ìrọ̀ irin
Òṣùwọ̀n Kálípà Díjítà Ìnṣì 65
5
Wire needed
Wire needed
Ń ṣí ìwé Jupyter…
Àwọn ohun-èlò
1- Àyè
Àwọn irinṣẹ́ tó nílò
8- Àyè
- Àyè
Ìtọ́nisọ́nà yìí ń ṣe
Blueprint tó jọra
Àwọn blueprint wọ̀nyí pín ìmọ̀ — ọ̀nà, ohun-èlò tàbí ìlànà
CC0 Àgbègbè Gbogbogbò
Blueprint yìí ti jáde lábẹ́ CC0. O lè ṣe àdàkọ, yí padà, pín, àti lò láìsí ìyọ̀ǹda.
Ṣàtìlẹ́yìn Olùṣẹ́dá nípa rírà àwọn ọjà nipasẹ̀ Blueprint wọn Ẹ̀san Olùṣẹ́dá tí àwọn Olùtajà gbé kalẹ̀, tàbí ṣẹ̀dá àtúnṣe tuntun ti Blueprint yìí kí o sì fi sínú Blueprint rẹ gẹ́gẹ́ bí ìsopọ̀ láti pín owó-wíwọlé.


