IṢẸ́ ỌNÀ
ẸWÀ ÀTI ÌLERA
IṢẸ́ ỌWỌ́
ÀṢÀ ÀTI ÌTÀN
ÌṢERÉ
ÀYÍKÁ
OÚNJẸ ÀTI OHUN MÍMU
REVERSE ENGINEERING
SÁYẸ́ǸSÌ
ERÉ ÌDÁRAYÁ
ÌMỌ̀-Ẹ̀RỌ
ÀWỌN OHUN WÍWỌ̀
Glass Sample Vials: Tubing Closed Flat, with a Lip and a Cork
Bubbles

Ṣẹ́dá nipasẹ̀

Bubbles

14. Oṣù Kẹwà 2026IT
22
0
0
0
0

Glass Sample Vials: Tubing Closed Flat, with a Lip and a Cork

A vial is a small glass tube closed at one end, usually with a flat bottom where a test tube has a round one. A lip vial is closed with a cork. Work wide glass tubing in the flame as for test tubes, flatten the closed end on the marver, turn out a lip and fit a cork. The picture: a small old glass vial with its cork.
Àárín
An afternoon

Ìlànà

1

Draw off and close

Heat the tubing in the flame while turning it until it softens through, then pull the ends apart to close it, as for test tubes. Melt the closed end until the glass gathers evenly.

Àwọn ohun èlò fún ìgbésẹ̀ yìí:

Àkójọpọ̀ Páìpù GíláàsìÀkójọpọ̀ Páìpù Gíláàsì1 ẹyọ

Àwọn irinṣẹ́ tí a nílò:

Ọ̀gọ̀ BunsenỌ̀gọ̀ Bunsen
Ìbọ̀wọ́ Tí Ń Fara Da OoruÌbọ̀wọ́ Tí Ń Fara Da Ooru
Gíláàsì ààbòGíláàsì ààbò
2

Flatten the bottom

While the closed end is soft, press it straight down on the marver so it sets flat and the vial stands (our step).

Àwọn irinṣẹ́ tí a nílò:

Ọ̀gọ̀ BunsenỌ̀gọ̀ Bunsen
Marver (pẹpẹ ìyí ti dígí)Marver (pẹpẹ ìyí ti dígí)
Ìbọ̀wọ́ Tí Ń Fara Da OoruÌbọ̀wọ́ Tí Ń Fara Da Ooru
3

Cut and turn the lip

Score the tube at the vial's length with a file and snap it. Heat the open end and roll out a small lip so a cork seats firmly.

Àwọn irinṣẹ́ tí a nílò:

Ìfá IrinÌfá Irin
Ọ̀gọ̀ BunsenỌ̀gọ̀ Bunsen
Gíláàsì ààbòGíláàsì ààbò
4

Anneal and cork

Let the vial cool slowly in the edge of the flame, then trim a cork to fit the mouth.

Àwọn ohun èlò fún ìgbésẹ̀ yìí:

Àwọn kọ́ọ̀kìÀwọn kọ́ọ̀kì1 ẹyọ

Àwọn irinṣẹ́ tí a nílò:

Ọ̀gọ̀ BunsenỌ̀gọ̀ Bunsen
Ọ̀bẹ iṣẹ́Ọ̀bẹ iṣẹ́
Ìlu kokiÌlu koki
5

Tube size for 50 ml

Ń ṣí ìwé Jupyter…

Àwọn ohun-èlò

2

Àwọn irinṣẹ́ tó nílò

7

Ìtọ́nisọ́nà yìí ń ṣe

Blueprint tó jọra

Àwọn blueprint wọ̀nyí pín ìmọ̀ — ọ̀nà, ohun-èlò tàbí ìlànà

CC0 Àgbègbè Gbogbogbò

Blueprint yìí ti jáde lábẹ́ CC0. O lè ṣe àdàkọ, yí padà, pín, àti lò láìsí ìyọ̀ǹda.

Ṣàtìlẹ́yìn Olùṣẹ́dá nípa rírà àwọn ọjà nipasẹ̀ Blueprint wọn Ẹ̀san Olùṣẹ́dá tí àwọn Olùtajà gbé kalẹ̀, tàbí ṣẹ̀dá àtúnṣe tuntun ti Blueprint yìí kí o sì fi sínú Blueprint rẹ gẹ́gẹ́ bí ìsopọ̀ láti pín owó-wíwọlé.

Ìfọ̀rọ̀wérọ̀

(0)

Wọlé láti dara pọ̀ mọ́ ìfọ̀rọ̀wérọ̀

Ń gbé àwọn ọ̀rọ̀ wọlé...