IṢẸ́ ỌNÀ
ẸWÀ ÀTI ÌLERA
IṢẸ́ ỌWỌ́
ÀṢÀ ÀTI ÌTÀN
ÌṢERÉ
ÀYÍKÁ
OÚNJẸ ÀTI OHUN MÍMU
REVERSE ENGINEERING
SÁYẸ́ǸSÌ
ERÉ ÌDÁRAYÁ
ÌMỌ̀-Ẹ̀RỌ
ÀWỌN OHUN WÍWỌ̀
Leather Strips and Straps
Belts, handles, laces and hinges start as strips cut from a side of firm vegetable-tanned leather. A strap cutter holds the width while you draw it along a straight edge; the edges are then bevelled, sanded and burnished smooth with a little gum and friction so they do not fray or fuzz.
Firm leather about 3–4 mm thick suits straps; thinner leather suits laces and binding strips.
Olùbẹ̀rẹ̀
1 hour
Ìlànà
1
1
The leather
The leather
How the firm, vegetable-tanned leather is made.
2
2
Cut a straight edge
Cut a straight edge
Lay the leather grain side up on the cutting mat and cut one long straight edge along the straightedge, following the backbone line where the leather is most even.
Àwọn ohun èlò fún ìgbésẹ̀ yìí:
Awọ tí a fi ewéko ṣe0.1 sqmÀwọn irinṣẹ́ tí a nílò:
Etí tààrà
Ọ̀bẹ iṣẹ́
Àwo ìgé tí ó ń wo ara rẹ̀ sàn
Òṣùwọ̀n Kálípà Díjítà Ìnṣì 63
3
Pull the strips
Pull the strips
Set the strap cutter to the width, run its fence against the straight edge and pull it along the leather in one steady draw. Repeat for each strip.
Àwọn irinṣẹ́ tí a nílò:
Ohun Ìgé Okùn Awọ
Okùn Ìdíwọ̀n4
4
Bevel the edges
Bevel the edges
Run the edge beveler along both corners of each edge, front and back.
Àwọn irinṣẹ́ tí a nílò:
Ohun ìgé ẹ̀gbẹ́ awọ5
5
Sand and burnish
Sand and burnish
Sand the edges smooth, dampen them with a little gum tragacanth in water, and rub hard with the wooden slicker until they shine. A touch of beeswax finishes them.
Àwọn ohun èlò fún ìgbésẹ̀ yìí:
Gọ́mù tragacanth (kitre)5 g
Omi0.05 lítà
Ìdí Oyin5 gÀwọn irinṣẹ́ tí a nílò:
Bébà ìpọ́n
Ohun ìdán ẹ̀gbẹ́ awọ6
6
Punch and finish
Punch and finish
Cut the ends to shape and punch any holes the strap needs.
Àwọn irinṣẹ́ tí a nílò:
Àkójọ ohun ìlu awọỌ̀bẹ iṣẹ́7
7
Troubleshooting
Troubleshooting
Strap cutting troubleshooting.
Flow
Loading...
Àwọn ohun-èlò
4- 0.1 sqmÀyè
- Àyè
- 0.05 lítàÀyè
- 5 gÀyè
Àwọn irinṣẹ́ tó nílò
10- Àyè
- Àyè
- 1 vendor sell this, none ship to you yetÀyè
- Àyè
Ìtọ́nisọ́nà yìí ń ṣe
Blueprint tó jọra
Àwọn blueprint wọ̀nyí pín ìmọ̀ — ọ̀nà, ohun-èlò tàbí ìlànà
CC0 Àgbègbè Gbogbogbò
Blueprint yìí ti jáde lábẹ́ CC0. O lè ṣe àdàkọ, yí padà, pín, àti lò láìsí ìyọ̀ǹda.
Ṣàtìlẹ́yìn Olùṣẹ́dá nípa rírà àwọn ọjà nipasẹ̀ Blueprint wọn Ẹ̀san Olùṣẹ́dá tí àwọn Olùtajà gbé kalẹ̀, tàbí ṣẹ̀dá àtúnṣe tuntun ti Blueprint yìí kí o sì fi sínú Blueprint rẹ gẹ́gẹ́ bí ìsopọ̀ láti pín owó-wíwọlé.