IṢẸ́ ỌNÀ
ẸWÀ ÀTI ÌLERA
IṢẸ́ ỌWỌ́
ÀṢÀ ÀTI ÌTÀN
ÌṢERÉ
ÀYÍKÁ
OÚNJẸ ÀTI OHUN MÍMU
REVERSE ENGINEERING
SÁYẸ́ǸSÌ
ERÉ ÌDÁRAYÁ
ÌMỌ̀-Ẹ̀RỌ
ÀWỌN OHUN WÍWỌ̀
Oak Boards and Blocks, Milled and Air-Dried
The same chainsaw mill that cuts pine boards cuts oak, but oak dries slowly and checks if it dries too fast. The old rule of a year per 25 mm of thickness is close for oak. Thin boards are cut for joinery; one thick slab is kept for blocks.
Compared with pine: a slower cut, a heavier log, and a drying time measured in years, not months.
Àárín
1 day milling, 1–3 years drying
Ìlànà
1
1
The milling method
The milling method
Setting up the mill and the guide board, as for pine.
2
2
Mill the boards
Mill the boards
Mill a straight oak log into boards a few millimetres over 25 mm, and one slab 80 mm thick for blocks. Oak is harder: feed slower and keep the chain sharp.
Àwọn ohun èlò fún ìgbésẹ̀ yìí:
Igi líle (oaki, mápù, bíìṣì)1 ẹyọ
Ìṣó igi6 ẹyọÀwọn irinṣẹ́ tí a nílò:
Chainsaw (ipò oníṣẹ́ igbó)
Férémù ayùn-ẹ̀rọ fún pípín igi
Pákó igi pine
Ẹ̀rọ Ìlùkòkò Aláìlókùn
Etí tààrà
Ìwọ̀n Ìtẹ́jú
Àkéte ààbò
Ìbòjú etí ààbò
Ìbọ̀wọ́ Iṣẹ́ Awọ
Bàtà ààbò oníkángun irin3
3
Seal the ends at once
Seal the ends at once
Coat both ends of every board and the slab with wax end sealer the same day.
Àwọn ohun èlò fún ìgbésẹ̀ yìí:
Ohun ìdí orí-pákó (ìdí paraffin)0.5 lítà4
4
Sticker in the shade
Sticker in the shade
Stack on a level base 30 cm off the ground, with 19 mm stickers every 30 cm, one above the other, in a shaded, airy place. Strong sun and wind make oak surfaces check.
Àwọn ohun èlò fún ìgbésẹ̀ yìí:
Ọ̀pá igi ìtò (àlàfo ìgbẹ́)40 ẹyọÀwọn irinṣẹ́ tí a nílò:
Pẹpẹ igiÌwọ̀n Ìtẹ́jú5
5
Cover and weight
Cover and weight
Cover the top against rain, weight the stack, and leave the sides open.
Àwọn irinṣẹ́ tí a nílò:
Táàpù6
6
How long to wait
How long to wait
Ń ṣí ìwé Jupyter…
7
7
Measure, then bring indoors
Measure, then bring indoors
Read a board from the middle of the stack each season. Air drying stops at about 12–15 %; bring the boards indoors to settle at 6–8 % before furniture work.
Àwọn irinṣẹ́ tí a nílò:
Ohun ìwọ̀n ọ̀rinrin8
8
Cut the blocks
Cut the blocks
When the slab reads dry right through a fresh cut, saw it into blocks of the lengths you need.
Àwọn irinṣẹ́ tí a nílò:
Ayùn ẹni méjì
Okùn Ìdíwọ̀nOhun ìwọ̀n ọ̀rinrin9
9
Troubleshooting
Troubleshooting
Oak drying troubleshooting.
Flow
Loading...
Àwọn ohun-èlò
4- Àyè
- 6 ẹyọÀyè
- 0.5 lítàÀyè
- Àyè
Àwọn irinṣẹ́ tó nílò
15- 1 vendor sell this, none ship to you yetÀyè
- Àyè
- Àyè
- Àyè
- Àyè
- Àyè
- 1 vendor sell this, none ship to you yetÀyè
Ìtọ́nisọ́nà yìí ń ṣe
Blueprint tó jọra
Àwọn blueprint wọ̀nyí pín ìmọ̀ — ọ̀nà, ohun-èlò tàbí ìlànà
CC0 Àgbègbè Gbogbogbò
Blueprint yìí ti jáde lábẹ́ CC0. O lè ṣe àdàkọ, yí padà, pín, àti lò láìsí ìyọ̀ǹda.
Ṣàtìlẹ́yìn Olùṣẹ́dá nípa rírà àwọn ọjà nipasẹ̀ Blueprint wọn Ẹ̀san Olùṣẹ́dá tí àwọn Olùtajà gbé kalẹ̀, tàbí ṣẹ̀dá àtúnṣe tuntun ti Blueprint yìí kí o sì fi sínú Blueprint rẹ gẹ́gẹ́ bí ìsopọ̀ láti pín owó-wíwọlé.