IṢẸ́ ỌNÀ
ẸWÀ ÀTI ÌLERA
IṢẸ́ ỌWỌ́
ÀṢÀ ÀTI ÌTÀN
ÌṢERÉ
ÀYÍKÁ
OÚNJẸ ÀTI OHUN MÍMU
REVERSE ENGINEERING
SÁYẸ́ǸSÌ
ERÉ ÌDÁRAYÁ
ÌMỌ̀-Ẹ̀RỌ
ÀWỌN OHUN WÍWỌ̀
Ratchet-Bar Egg Beater: Push a Rack, the Floats Spin Both Ways
Beating eggs in a closed beater keeps the air out, and a beater bolted to its vessel is slow to empty and clean.
Harvey Miller of Cincinnati, Ohio, received US 18,759, dated 1 December 1857, for an egg beater: a frame whose standards clasp an open jar, a bar sliding through slots that gears into a pinion on a vertical spindle, and wire floats on the spindle that turn rapidly one way then the other as the bar is pushed to and fro; lifting the frame frees the jar.
This rung works out the turns per stroke, then prints the rack and pinion, builds the frame and floats, and times a beating.
Àárín
About 5 hours, plus printing
Ìlànà
1
1
Turns per stroke
Turns per stroke
Ń ṣí ìwé Jupyter…
2
2
The rack and pinion it uses
The rack and pinion it uses
The embedded blueprint turns a straight push into rotation. Miller pushes the rack by hand and the pinion spins the floats.
3
3
Read US 18,759
Read US 18,759
"By this arrangement, if one hand be placed upon the upper bar B to hold the machine steady, while with the other hand upon the handle j, of the ratchet bar g, a reciprocating motion be given to the ratchet bar, then the spindle c, with its floats d, is set in rapid motion, alternately revolving in each direction."
4
4
Print the rack and pinion
Print the rack and pinion
Print the 12-tooth pinion (/uploads/blueprints/ratchet-bar-egg-beater-pinion.stl) and the 20-tooth rack (/uploads/blueprints/ratchet-bar-egg-beater-rack.stl). Print in PETG at 0.2 mm layers, 30 % infill, 4 walls.
Àwọn ohun èlò fún ìgbésẹ̀ yìí:
Okùn PETG1 ẹyọÀwọn irinṣẹ́ tí a nílò:
Ẹ̀rọ ìtẹ̀ 3D oníwàyà (FDM)5
5
Build the frame
Build the frame
Cut two 170 mm standards and two cross-bars from hardwood. Screw them into a gate that straddles the jar, cut 13 × 11 mm slots across the standards' tops for the rack, and give the feet a curve to fit the jar.
Àwọn ohun èlò fún ìgbésẹ̀ yìí:
Ìṣù Igi Líle1 ẹyọ
Ìsúrù igi #8 x 1"1 ẹyọÀwọn irinṣẹ́ tí a nílò:
Ayùn Kópìngì
Àwọn Ìfá (Ìfá Ọwọ́)
Ẹ̀rọ Ìlùkòkò Aláìlókùn
Àkójọ Orí Ìlùkòkò
Ìṣù àwọn ohun ìyí skurú
Ìdíwọ̀n6
6
Make the spindle and floats
Make the spindle and floats
Cut 160 mm of 5 mm steel rod. Bend three loops of stainless wire 45 mm across and 50 mm high, bind their ends to the rod's lower end, and epoxy them. Press the pinion onto the top.
Àwọn ohun èlò fún ìgbésẹ̀ yìí:
Ọ̀pá Róbótó Irin Rírọ̀1 ẹyọ
Okùn irin aláìjẹrùn1 ẹyọ
Ẹpọ́ksì Ẹ̀yà Méjì1 ẹyọÀwọn irinṣẹ́ tí a nílò:
Ayùn Irin
Ẹ̀mú Olórí Yíká
Ẹmú Ẹnu Pẹrẹsẹ
Gílásì Ààbò Tí Ó Mọ́7
7
Assemble
Assemble
Hang the spindle from the lower cross-bar in a 5 mm hole, slide the rack through the slots so its teeth mesh with the pinion, and stand the gate over the bowl.
Àwọn ohun èlò fún ìgbésẹ̀ yìí:
Wáṣà Pẹrẹsẹ1 ẹyọÀwọn irinṣẹ́ tí a nílò:
Ẹ̀rọ Ìlùkòkò AláìlókùnÀkójọ Orí Ìlùkòkò8
8
The patent drawing
The patent drawing
US 18,759 drawing sheet, public domain (expired patent).
9
9
Beat egg whites
Beat egg whites
Separate two egg whites into the bowl. Pump the rack at about two strokes a second and time how long until they hold stiff peaks.
Àwọn ohun èlò fún ìgbésẹ̀ yìí:
Ẹyin2 ẹyọÀwọn irinṣẹ́ tí a nílò:
Àwo ìdàpọ̀ ńlá ti irin tí kò ń yá
Aago Ìdúró10
10
A rack that jams, slips or a float that hits the bowl
A rack that jams, slips or a float that hits the bowl
Ratchet-bar egg beater troubleshooting.
Flow
Loading...
11
11
History and honest limits
History and honest limits
**Harvey Miller** of Cincinnati, Ohio, received US 18,759, dated 1 December 1857. His frame and parts were cast iron, the floats iron wire coated with tin, the jar porcelain or tin with no cover, so air has free access; neither shaft nor floats touch the vessel. He did not claim the ratchet bar or revolving beaters alone, only the frame with them in combination with the jar.
**Honest limits.** FDM prints hold food in their layer lines, so wash well and replace when worn. Printed PETG gears and a hardwood gate stand in for cast iron. Your times are the result.
Àwọn ohun-èlò
8- 1 ẹyọÀyè
- 1 ẹyọÀyè
- 1 ẹyọÀyè
- Àyè
- 1 ẹyọÀyè
- 1 ẹyọÀyè
- 1 ẹyọÀyè
- 2 ẹyọÀyè
Àwọn irinṣẹ́ tó nílò
13- Àyè
- 1 vendor sell this, none ship to you yetÀyè
- Àyè
- Àyè
- Àyè
Ìtọ́nisọ́nà yìí ń ṣe
Blueprint tó jọra
Àwọn blueprint wọ̀nyí pín ìmọ̀ — ọ̀nà, ohun-èlò tàbí ìlànà
CC0 Àgbègbè Gbogbogbò
Blueprint yìí ti jáde lábẹ́ CC0. O lè ṣe àdàkọ, yí padà, pín, àti lò láìsí ìyọ̀ǹda.
Ṣàtìlẹ́yìn Olùṣẹ́dá nípa rírà àwọn ọjà nipasẹ̀ Blueprint wọn Ẹ̀san Olùṣẹ́dá tí àwọn Olùtajà gbé kalẹ̀, tàbí ṣẹ̀dá àtúnṣe tuntun ti Blueprint yìí kí o sì fi sínú Blueprint rẹ gẹ́gẹ́ bí ìsopọ̀ láti pín owó-wíwọlé.