IṢẸ́ ỌNÀ
ẸWÀ ÀTI ÌLERA
IṢẸ́ ỌWỌ́
ÀṢÀ ÀTI ÌTÀN
ÌṢERÉ
ÀYÍKÁ
OÚNJẸ ÀTI OHUN MÍMU
REVERSE ENGINEERING
SÁYẸ́ǸSÌ
ERÉ ÌDÁRAYÁ
ÌMỌ̀-Ẹ̀RỌ
ÀWỌN OHUN WÍWỌ̀
Rotary-and-Vibrating Dasher Churn: Turn to Churn, Lift and Plunge to Gather
Nash wanted to switch from churning to gathering "without changing the connection of the machinery."
William R. Nash of Bridgeport, Connecticut, received US 7,348, dated 7 May 1850, for working rotary and vertical churn-dashers on one shaft. A rotary dasher of four radial hollow prismatic arms, each with a hole in its forward side near the shaft and an aperture in its rear side near its end, turns above a perforated vibrating dasher held between collars. The pinion on the lid drives the shaft by a pin in a notch, "but the shaft being free to slide vertically upward," the handle on top can work the vibrating dasher up and down.
This rung looks at the hollow arms, then prints both dashers and the notched pinion, fits them in a box, and makes butter.
Àárín
About 4 hours, plus printing
Ìlànà
1
1
Air through the arms
Air through the arms
Ń ṣí ìwé Jupyter…
2
2
Rotary and reciprocating dashers on one spindle before it
Rotary and reciprocating dashers on one spindle before it
The embedded blueprint works both dashers at once from one crank. Nash uses them one after the other: rotary to churn, vibrating to gather.
3
3
Read US 7,348
Read US 7,348
"The nature of this invention consists, principally in so arranging and combining in the same churn and upon one shaft, a horizontal rotary dasher and a vertically vibrating dasher, that while the rotary dasher is operated for the purpose of agitating the cream, the vibrating dasher remains at rest; and that when the butter is produced, the vibrating dasher may be operated for the purpose of gathering or consolidating the butter."
4
4
Print the parts
Print the parts
Print the rotary dasher with its four hollow triangular arms (/uploads/blueprints/rotary-and-vibrating-dasher-churn-rotary-dasher.stl), the perforated vibrating dasher (/uploads/blueprints/rotary-and-vibrating-dasher-churn-vibrating-dasher.stl), the notched pinion (/uploads/blueprints/rotary-and-vibrating-dasher-churn-notched-pinion.stl) and the crank arm (/uploads/blueprints/rotary-and-vibrating-dasher-churn-crank-arm.stl). Print in PETG at 0.2 mm layers, 30 % infill, 4 walls; wash before first use.
Àwọn ohun èlò fún ìgbésẹ̀ yìí:
Okùn PETG1 ẹyọÀwọn irinṣẹ́ tí a nílò:
Ẹ̀rọ ìtẹ̀ 3D oníwàyà (FDM)5
5
Shaft and dashers
Shaft and dashers
Use a 12 mm hardwood dowel as the shaft, squared where the rotary dasher sits. Glue two collars of short dowel on it either side of the vibrating dasher so it is carried up and down but turns freely, and glue the rotary dasher 30 mm above. Drill a cross hole for a steel pin just above where the pinion will sit, and fit a handle on top.
Àwọn ohun èlò fún ìgbésẹ̀ yìí:
Àwọn dowel igi líle1 ẹyọ
Ọ̀pá Róbótó Irin Rírọ̀1 ẹyọ
Ìdìpọ̀ Igi1 ẹyọÀwọn irinṣẹ́ tí a nílò:
Ayùn Ọwọ́
Ẹ̀rọ Ìlùkòkò Aláìlókùn
Àkójọ Orí Ìlùkòkò
Ayùn Irin6
6
Lid, pinion and crank
Lid, pinion and crank
Take a food-safe square box about 170 mm each way and cut a two-part plywood lid, one part removable. Seat the pinion on the lid round the shaft, the pin lying in its notch. Mount a crown wheel on a short crank shaft between two posts on the lid so its pegs mesh the pinion, as his gear wheel I, and fit the crank arm.
Àwọn ohun èlò fún ìgbésẹ̀ yìí:
Àgọ́ ìtọ́jú ti ìpele oúnjẹ1 ẹyọ
Àwo igi tí a lẹ̀ pọ̀1 ẹyọ
Pákó igi pine1 ẹyọÀwọn dowel igi líle1 ẹyọ
Ìsúrù igi #8 x 1"1 ẹyọÀwọn irinṣẹ́ tí a nílò:
Ayùn KópìngìẸ̀rọ Ìlùkòkò Aláìlókùn
Ìṣù àwọn ohun ìyí skurú7
7
The patent drawing
The patent drawing
US 7,348 drawing sheet, public domain (expired patent).
8
8
Churn by crank, gather by hand
Churn by crank, gather by hand
Let the heavy cream stand until it reaches about 15 °C, checked with the thermometer. Pour in 1.5 litres. Turn the crank; time until the butter comes. Then work the handle up and down, so the vibrating dasher gathers the butter while the gearing rests. Pour off the buttermilk, add cold water, churn a little and pour off again until it runs clear; work in a pinch of salt and weigh the butter.
Àwọn ohun èlò fún ìgbésẹ̀ yìí:
Ọ̀rá wàrà tó nípọn1500 ml
Iyọ̀ Òkun Rúkèrúdò1 ẹyọ
Omi1 ẹyọÀwọn irinṣẹ́ tí a nílò:
Ẹ̀rọ ìwọ̀n ooru oníhun tí ó dúró sí inú
Aago Ìdúró
Òṣùwọ̀n Díjítà Ilé Ìdáná
Àwo ìdàpọ̀ ńlá ti irin tí kò ń yá9
9
A pin that jumps, a dasher that turns
A pin that jumps, a dasher that turns
Rotary-and-vibrating dasher troubleshooting.
Flow
Loading...
10
10
History and honest limits
History and honest limits
**William R. Nash** of Bridgeport, Fairfield County, Connecticut, received US 7,348, dated 7 May 1850. His lid was in two parts so one could be removed "without disturbing" the other; "one or more additional rotary dashers, may be attached to the vertical shaft." He claimed the application of the shaft to give a vertical reciprocating movement to the vibrating dasher and a rotary one to the others, so either can be used.
**Honest limits.** A pegged crown wheel and pinion stand in for his gear wheel and pinion; a food-safe box and printed dashers for his. FDM prints hold food in their layer lines, so wash well and replace when worn. Your times and weights are the result.
Àwọn ohun-èlò
11- 1 ẹyọÀyè
- 1 ẹyọÀyè
- Àyè
- 1 ẹyọÀyè
- Àyè
- 1 ẹyọÀyè
- 1 ẹyọÀyè
- 1 ẹyọÀyè
- 1500 mlÀyè
- 1 ẹyọÀyè
- 1 ẹyọÀyè
Àwọn irinṣẹ́ tó nílò
11- Àyè
- 1 vendor sell this, none ship to you yetÀyè
- Àyè
- Àyè
- Àyè
Ìtọ́nisọ́nà yìí ń ṣe
Blueprint tó jọra
Àwọn blueprint wọ̀nyí pín ìmọ̀ — ọ̀nà, ohun-èlò tàbí ìlànà
Double-Motion Dasher Churn: One Crank Spins One Dasher and Plunges the Other
láti ọwọ́ Emma
OÚNJẸ ÀTI OHUN MÍMU
21
0
0
0
0
0
Whirl-Frame Air Dasher Churn: Free Wheels Spun by the Milk Inside a Revolving Frame
láti ọwọ́ Martin
OÚNJẸ ÀTI OHUN MÍMU
18
0
0
0
0
0
Hollow-Arm Air Churn: A Spinning Dasher That Breathes Air Into the Cream
láti ọwọ́ Emma
OÚNJẸ ÀTI OHUN MÍMU
14
0
0
0
0
0
CC0 Àgbègbè Gbogbogbò
Blueprint yìí ti jáde lábẹ́ CC0. O lè ṣe àdàkọ, yí padà, pín, àti lò láìsí ìyọ̀ǹda.
Ṣàtìlẹ́yìn Olùṣẹ́dá nípa rírà àwọn ọjà nipasẹ̀ Blueprint wọn Ẹ̀san Olùṣẹ́dá tí àwọn Olùtajà gbé kalẹ̀, tàbí ṣẹ̀dá àtúnṣe tuntun ti Blueprint yìí kí o sì fi sínú Blueprint rẹ gẹ́gẹ́ bí ìsopọ̀ láti pín owó-wíwọlé.