IṢẸ́ ỌNÀ
ẸWÀ ÀTI ÌLERA
IṢẸ́ ỌWỌ́
ÀṢÀ ÀTI ÌTÀN
ÌṢERÉ
ÀYÍKÁ
OÚNJẸ ÀTI OHUN MÍMU
REVERSE ENGINEERING
SÁYẸ́ǸSÌ
ERÉ ÌDÁRAYÁ
ÌMỌ̀-Ẹ̀RỌ
ÀWỌN OHUN WÍWỌ̀
Strontium Ferrite Disc Magnet: Presintered, 4 Minutes at 1150 °C (Went, Philips 1956, Ex. 25)
Charlie

Ṣẹ́dá nipasẹ̀

Charlie

28. Oṣù Kẹwà 2026DE
0
0
0
0
0

Strontium Ferrite Disc Magnet: Presintered, 4 Minutes at 1150 °C (Went, Philips 1956, Ex. 25)

A strontium ferrite with more strontium: 0.4 mol strontium carbonate to 0.8 mol iron oxide, milled, presintered at 1000 °C, milled again, pressed and passed through a 1150 °C furnace in 4 minutes. Went's rod held 1,200 gauss with a coercive force of 3,710 oersted. Source: J. J. Went, G. W. van Oosterhout and E. W. Gorter (Philips), US 2,762,777 (1956), Example 25. They sintered rods; discs and the magnetising are ours. Picture: ferrite magnets, Omegatron, Wikimedia Commons, CC BY-SA 3.0.
Ilọsíwájú
2 days

Ìlànà

1

Dry the strontium carbonate and weigh

Dry the strontium carbonate at 100 °C. Weigh 59.05 g of it (0.4 mol) and 127.5 g ferric oxide (0.8 mol).

Àwọn ohun èlò fún ìgbésẹ̀ yìí:

Strontium carbonateStrontium carbonate59.05 g
Ọ́kísáìdì irin (III)Ọ́kísáìdì irin (III)127.5 g

Àwọn irinṣẹ́ tí a nílò:

Ààrò ìgbẹ̀Ààrò ìgbẹ̀
Òǹwọ̀n ìdọ́gbaÒǹwọ̀n ìdọ́gba
Ẹ̀rọ Ìmí P100Ẹ̀rọ Ìmí P100
2

Mill 7 hours, dry at 110 °C

Grind with alcohol in a ball mill for 7 hours and dry at 110 °C.

Àwọn irinṣẹ́ tí a nílò:

Ẹ̀rọ Lílọ Bọ́ọ̀lù IrinẸ̀rọ Lílọ Bọ́ọ̀lù Irin
Ethanol - ìpele ilé-ìwádìí, 95 %Ethanol - ìpele ilé-ìwádìí, 95 %
Ààrò ìgbẹ̀Ààrò ìgbẹ̀
3

Presinter in air at 1000 °C for 4 hours

Fire in air at 1000 °C for 4 hours.

Àwọn irinṣẹ́ tí a nílò:

Ààrò muffleÀàrò muffle
Ìkòkò ìyọ́ pẹ̀lú ìdérí (porcelain)Ìkòkò ìyọ́ pẹ̀lú ìdérí (porcelain)
Ẹmú Ìkòkò Ìyọ́Ẹmú Ìkòkò Ìyọ́
Ìbọ̀wọ́ Tí Ń Fara Da OoruÌbọ̀wọ́ Tí Ń Fara Da Ooru
4

Mill again, dry, press at 1.5 t/cm²

Grind again 7 hours with alcohol, dry at 110 °C and press at 1.5 tonnes per cm² (ours: discs).

Àwọn irinṣẹ́ tí a nílò:

Ẹ̀rọ Lílọ Bọ́ọ̀lù IrinẸ̀rọ Lílọ Bọ́ọ̀lù Irin
Ethanol - ìpele ilé-ìwádìí, 95 %Ethanol - ìpele ilé-ìwádìí, 95 %
Ààrò ìgbẹ̀Ààrò ìgbẹ̀
Ẹ̀rọ ìtẹ̀ háídírọ́líìkìẸ̀rọ ìtẹ̀ háídírọ́líìkì
Mọ́ọ̀dù títẹ díìsìMọ́ọ̀dù títẹ díìsì
5

Pass through a 1150 °C zone in 4 minutes

Sinter at 1150 °C by passing the pieces through a 4 cm hot zone at 10 mm per minute: 4 minutes in the heat.

Àwọn irinṣẹ́ tí a nílò:

Ààrò Ọ̀pọ́nÀàrò Ọ̀pọ́n
Ìbọ̀wọ́ Tí Ń Fara Da OoruÌbọ̀wọ́ Tí Ń Fara Da Ooru
6

Magnetise the discs

The patent gives no magnetising method. Ours: lay a disc with its faces against the poles of a strong electromagnet, switch the current on, then off. Find which face is north with a compass.

Àwọn irinṣẹ́ tí a nílò:

Òòfà iná-mànàmánáÒòfà iná-mànàmáná
Kọ́mpasiKọ́mpasi

Àwọn ohun-èlò

2

Àwọn irinṣẹ́ tó nílò

14

Ìtọ́nisọ́nà yìí ń ṣe

CC0 Àgbègbè Gbogbogbò

Blueprint yìí ti jáde lábẹ́ CC0. O lè ṣe àdàkọ, yí padà, pín, àti lò láìsí ìyọ̀ǹda.

Ṣàtìlẹ́yìn Olùṣẹ́dá nípa rírà àwọn ọjà nipasẹ̀ Blueprint wọn Ẹ̀san Olùṣẹ́dá tí àwọn Olùtajà gbé kalẹ̀, tàbí ṣẹ̀dá àtúnṣe tuntun ti Blueprint yìí kí o sì fi sínú Blueprint rẹ gẹ́gẹ́ bí ìsopọ̀ láti pín owó-wíwọlé.

Ìfọ̀rọ̀wérọ̀

(0)

Wọlé láti dara pọ̀ mọ́ ìfọ̀rọ̀wérọ̀

Ń gbé àwọn ọ̀rọ̀ wọlé...