IṢẸ́ ỌNÀ
ẸWÀ ÀTI ÌLERA
IṢẸ́ ỌWỌ́
ÀṢÀ ÀTI ÌTÀN
ÌṢERÉ
ÀYÍKÁ
OÚNJẸ ÀTI OHUN MÍMU
REVERSE ENGINEERING
SÁYẸ́ǸSÌ
ERÉ ÌDÁRAYÁ
ÌMỌ̀-Ẹ̀RỌ
ÀWỌN OHUN WÍWỌ̀
Wooden Knitting Needles from Dowel
A knitting needle's size is simply its diameter in millimetres, so a dowel of the right size is most of the job. One end is tapered to a smooth, rounded point that slips into the stitch without splitting the yarn, and the wood is sanded glassy so the stitches slide.
Olùbẹ̀rẹ̀
1 hour a pair
Ìlànà
1
1
Choose the dowel
Choose the dowel
Pick straight hardwood dowels of the needle size you want, checked with the caliper, and cut two lengths of about 35 cm.
Àwọn ohun èlò fún ìgbésẹ̀ yìí:
Àwọn dowel igi líle2 ẹyọÀwọn irinṣẹ́ tí a nílò:
Òṣùwọ̀n Kálípà Díjítà Ìnṣì 6
Ayùn ẹni méjì
Okùn Ìdíwọ̀n2
2
Shape the points
Shape the points
Whittle one end of each to a taper about 3 cm long, turning the dowel as you go so it stays centred, and round the very tip.
Àwọn irinṣẹ́ tí a nílò:
Ọ̀bẹ3
3
Sand glassy
Sand glassy
Sand the points and the whole shaft with coarse then fine paper until smooth, and round over the back ends.
Àwọn irinṣẹ́ tí a nílò:
Bébà ìpọ́n4
4
Oil and wax
Oil and wax
Rub in linseed oil, let it dry for a few days, then polish with beeswax.
Àwọn ohun èlò fún ìgbésẹ̀ yìí:
Òróró Ọ̀gbọ̀5 ml
Ìdí Oyin5 gÀwọn ohun-èlò
3- 2 ẹyọÀyè
- 5 mlÀyè
- 5 gÀyè
Àwọn irinṣẹ́ tó nílò
5- 1 vendor sell this, none ship to you yetÀyè
- Àyè
- Àyè
Ìtọ́nisọ́nà yìí ń ṣe
Blueprint tó jọra
Àwọn blueprint wọ̀nyí pín ìmọ̀ — ọ̀nà, ohun-èlò tàbí ìlànà
CC0 Àgbègbè Gbogbogbò
Blueprint yìí ti jáde lábẹ́ CC0. O lè ṣe àdàkọ, yí padà, pín, àti lò láìsí ìyọ̀ǹda.
Ṣàtìlẹ́yìn Olùṣẹ́dá nípa rírà àwọn ọjà nipasẹ̀ Blueprint wọn Ẹ̀san Olùṣẹ́dá tí àwọn Olùtajà gbé kalẹ̀, tàbí ṣẹ̀dá àtúnṣe tuntun ti Blueprint yìí kí o sì fi sínú Blueprint rẹ gẹ́gẹ́ bí ìsopọ̀ láti pín owó-wíwọlé.