Collaboration
ART
BEAUTY & WELLNESS
CRAFT
CULTURE & HISTORY
ENTERTAINMENT
ENVIRONMENT
FOOD & DRINKS
REVERSE ENGINEERING
SCIENCES
SPORTS
TECHNOLOGY
WEARABLES
60-Mesh and 80-Mesh Sieves: U.S. Standard Sieves No. 60 and No. 80 (Bureau of Standards, 1924)
Two standard testing sieves made the same way; only the wire and the opening change with the sieve number. Plain-woven brass or bronze wire cloth is soldered smoothly into a round frame about 20 cm (8 in) across.
No. 60 has 0.250 mm openings (the 60-mesh sieve); No. 80 has 0.177 mm openings (the 80-mesh sieve). The finer the cloth, the finer the grains that pass.
Source: Bureau of Standards, Letter Circular 74, Standard Specifications for Sieves (revised 1924). Unknown: the frame metal and the weaving. Picture: the Bureau's table.
Intermediate
Unknown
Instructions
1
1
Choose the sieve number
Choose the sieve number
The sieve number sets the wire and the opening (Bureau of Standards table, 1924):
No. 60: opening 0.250 mm (0.0098 in), wire 0.162 mm (0.0064 in).
No. 80: opening 0.177 mm (0.0070 in), wire 0.119 mm (0.0047 in).
The opening is the clear space between adjacent wires. No. 60 passes grains under 0.250 mm; No. 80 passes grains under 0.177 mm.
2
2
Weave the wire cloth
Weave the wire cloth
Weave plain (not twilled) cloth from brass, bronze or other suitable wire of the diameter for your sieve number, spacing the wires so the opening is as in the table each way. Ours: bronze wire. Not given: how it is woven.
Materials for this step:
Bronze Wire1 warp and shoot wiresTools needed:
Wire Cloth Loom3
3
Make the frame
Make the frame
Make a circular frame about 20 cm (8 in) across, with about 5 cm (2 in), or 2.5 cm (1 in), between its top and the cloth. Ours: brass strip. Not given: the frame metal.
Materials for this step:
Brass Strip1 frameTools needed:
Tin Snips
Soldering Iron4
4
Mount the cloth
Mount the cloth
Mount the cloth on the frame without distorting it. Fill the joint between cloth and frame smoothly with solder, so the material being sieved cannot catch in it.
Materials for this step:
Tin-Lead Solder1 joint
Flux1 jointTools needed:
Soldering Iron5
5
Check it against the tolerances
Check it against the tolerances
Measure the warp and shoot wires separately. For both numbers the average opening must be within ±6 % of the table, the average wire diameter within −15 to +35 %, and no opening may exceed the table opening by more than 40 %. Reject a sieve with punctures, loose or wavy cloth, poor soldering, or too many large openings.
Tools needed:
Micrometer
Magnifying GlassMaterials
4- 1 warp and shoot wiresPlaceholder
- 1 framePlaceholder
- 1 jointPlaceholder
- 1 jointPlaceholder
Tools Required
5- Placeholder
- Placeholder
- Soldering Iron3% commissionMagento Legacy StoreLOCALPlaceholder
- Placeholder
- Placeholder
Connected Blueprint Materials
10% Attribution
120-Mesh Sieve: U.S. Standard Sieve No. 120 (Bureau of Standards, 1924)
by Tex
Physics
4
0
0
0
1
0
10% Attribution
Tin Bronze Ingots, Wire and Rod
by Forge
Metalworking
52
0
0
0
2
0
10% Attribution
Brass Sheet, Strip and Rod from an Ingot
by Forge
Metalworking
36
0
0
0
2
0
Hazardous
10% Attribution
Making Tin-Lead Solder — The Ancient Alloy That Joins Metals Without a Forge
by Peter
Metalworking
56
0
0
0
3
0
This blueprint makes
CC0 Public Domain
This blueprint is released under CC0. You are free to copy, modify, distribute, and use this work for any purpose, without asking permission.
Support the Maker by purchasing products through their Blueprint where they earn a Maker Commission set by Vendors, or create a new iteration of this Blueprint and include it as a connection in your own Blueprint to share revenue.