कला
सुन्दरता र कल्याण
हस्तकला
संस्कृति र इतिहास
मनोरञ्जन
वातावरण
खाना र पेय
रिभर्स इन्जिनियरिङ
विज्ञान
खेलकुद
प्रविधि
पहिर्न मिल्ने
Air Blow Gun: Press-Button Valve and Conical Air Shield
Harry Yates's air gun (US 2,604,361, 1952) for blowing chips off lathes and drills. A press-button valve is held shut by the line pressure itself; pressed, it lets air into a ribbed nozzle that splits it into a central jet and a cone of air from a ring slot, which keeps flying chips away from the worker's eyes. The rubber valve face comes out by unscrewing one cap.
The patent gives no materials (except the rubber face), threads or sizes; the machine tools named are ours. The picture: the patent's drawing.
उन्नत
1 day
निर्देशनहरू
1
1
Bore the body
Bore the body
Bore the body's vertical opening: stem bearing (13), wider air passage (14), wider chamber (15) threaded at the bottom (16), with a valve seat rib (17) undercut round its edge. Ours: lathe and boring bar, tap for the thread.
यस चरणका सामग्री:
ब्लो गनको बडी1 टुक्राचाहिने औजार:
धातुको खराद
बोरिङ बार
चुरो काट्ने सेट2
2
Bore the hose pocket so it breaks into the chamber
Bore the hose pocket so it breaks into the chamber
Bore and thread the hose pocket (19) so its edge cuts into the chamber, opening the port (20) and leaving a centre projection (21): an overhang that turns incoming air down into the chamber, away from the seat.
चाहिने औजार:
धातुको खरादबोरिङ बारचुरो काट्ने सेट3
3
Bore the barrel
Bore the barrel
Bore the front barrel (11) to a cylindrical pocket (22) joined to the air passage by a tapered passage (23). Bevel the barrel's front end (44).
चाहिने औजार:
धातुको खरादबोरिङ बार4
4
Fit stem and press-button
Fit stem and press-button
Pass the valve stem (24) up through the body and press its stud (25) into the socket (27) of the press-button (28). The button slides in the bearing; the stem's flange (26) stops it coming out upward, the button head downward. Ours: arbor press.
यस चरणका सामग्री:
भल्भ स्टेम1 टुक्रा
भल्भको थिच्ने बटन1 टुक्राचाहिने औजार:
आर्बर प्रेस5
5
Make the valve closure
Make the valve closure
Set the rubber valve face (36) in the recess (35) on top of the closure member (30) and press a flanged tubular eyelet (37) into its centre hole (38) to hold it.
यस चरणका सामग्री:
भल्भ बन्द गर्ने पुर्जा1 टुक्रा
भल्भको रबर सतह1 टुक्रा
आइलेट1 टुक्राचाहिने औजार:
आर्बर प्रेस6
6
Close the chamber
Close the chamber
Slide the closure's stud (31) into the pocket (32) of the closure cap (33) and screw the cap into the chamber, a gasket (34) under its flange. The stem's pin (29) rests on the closure. Ours: flat screwdriver in the cap's slot.
यस चरणका सामग्री:
बन्द गर्ने बिर्को1 टुक्रा
ग्यास्केट1 टुक्राचाहिने औजार:
पेचकिला - चेप्टो7
7
Press in the nozzle
Press in the nozzle
Force the nozzle's ribs (41) into the barrel pocket (22) until its inner end stops on the tapered passage (23). That stop fixes the ring slot (45) between the nozzle's cone shoulder (42) and the barrel bevel (44).
यस चरणका सामग्री:
हावाको नोजल1 टुक्राचाहिने औजार:
आर्बर प्रेस8
8
Screw on the tip and the hose nipple
Screw on the tip and the hose nipple
Screw the tip (49) into the nozzle's threaded pocket (48); its bore (50) is wider than the jet hole (47) so it does not touch the jet, and it can clamp an extension tube. Screw a hose nipple into the hose pocket (19).
यस चरणका सामग्री:
नोजलको टुप्पो1 टुक्रा
होजको चुडीदार निपल1 टुक्राचाहिने औजार:
मिलाउन मिल्ने पाना9
9
Try the jet and the shield
Try the jet and the shield
Ours: connect an air hose from a compressor. The line pressure alone holds the valve shut. Press the button: a central jet leaves the jet hole, and a cone of air from the ring slot surrounds it.
चाहिने औजार:
हावा कम्प्रेसर
एयर होजसामग्री
11- 1 टुक्राप्लेसहोल्डर
- 1 टुक्राप्लेसहोल्डर
- 1 टुक्राप्लेसहोल्डर
- 1 टुक्राप्लेसहोल्डर
- 1 टुक्राप्लेसहोल्डर
- 1 टुक्राप्लेसहोल्डर
- 1 टुक्राप्लेसहोल्डर
- 1 टुक्राप्लेसहोल्डर
- 1 टुक्राप्लेसहोल्डर
- 1 टुक्राप्लेसहोल्डर
- 1 टुक्राप्लेसहोल्डर
यो खाकाले बनाउँछ
सम्बन्धित ब्लुप्रिन्ट
यी ब्लुप्रिन्टहरूले ज्ञान साझा गर्छन् — प्रविधि, सामग्री वा सिद्धान्त
CC0 सार्वजनिक डोमेन
यो ब्लुप्रिन्ट CC0 अन्तर्गत जारी गरिएको छ। तपाईं अनुमति नसोधी प्रतिलिपि, परिमार्जन, वितरण र प्रयोग गर्न सक्नुहुन्छ।
ब्लुप्रिन्ट मार्फत उत्पादनहरू किनेर सिर्जनाकर्तालाई सहयोग गर्नुहोस् सिर्जनाकर्ता कमिसन विक्रेताले तोकेको, वा यो ब्लुप्रिन्टको नयाँ संस्करण बनाउनुहोस् र आम्दानी बाँड्न आफ्नो ब्लुप्रिन्टमा जडानको रूपमा समावेश गर्नुहोस्।