सहयोग
कला
सुन्दरता र कल्याण
हस्तकला
संस्कृति र इतिहास
मनोरञ्जन
वातावरण
खाना र पेय
रिभर्स इन्जिनियरिङ
विज्ञान
खेलकुद
प्रविधि
पहिर्न मिल्ने

Cartridge Belt: Wide Leather Belt With a Woven Strip Forming the Loops (Boy Mechanic, 1915)
Robert Pound of Lavina, Montana, sent this cartridge belt to The Boy Mechanic, Book 2 (1915): a leather belt about 2-1/2 in wide with a 1 in strip woven through pairs of slits to form a row of loops. Using the strip's free end in the buckle lets the loops be tightened for different sizes.
शुरुआती
About 2 hours
निर्देशनहरू
1
1
His sizes, and how many loops
His sizes, and how many loops
Jupyter नोटबुक लोड हुँदैछ…
2
2
Read The Boy Mechanic, Book 2
Read The Boy Mechanic, Book 2
"Procure a leather belt, about 2-1/2 in. wide and long enough to reach about the waist, also a piece of leather, 1 in. wide and twice as long as the belt."
3
3
Cut the belt and strip
Cut the belt and strip
Cut a leather belt about 2-1/2 in wide and long enough to go round the waist, and a strip 1 in wide and twice as long as the belt. Fix a buckle to one end of the belt and rivet one end of the strip to the belt near the buckle.
यस चरणका सामग्री:
हार्नेसको छाला2 टुक्रा
जिब्रो भएको फलामे बकल1 टुक्रा
तामाका रिभेट1 टुक्राचाहिने औजार:
छाला काट्ने छुरी
छालामा प्वाल पार्ने पन्च
घन
नाप्ने फित्ता4
4
Weave the loops
Weave the loops
Cut two slits in the belt, a cartridge's diameter apart. Pass the strip through one slit and back through the other to make a loop. About 1/4 in further on, cut two more slits and form the next loop the same way, and so on along the whole belt.
चाहिने औजार:
छाला काट्ने छुरी
नाप्ने फित्ता
सिसाकलम5
5
Finish the end
Finish the end
Rivet the end of the strip to the belt, or take it into the buckle: then the strip can be drawn up to fit cartridges of different sizes. Punch the holes for the buckle tongue.
यस चरणका सामग्री:
तामाका रिभेट1 टुक्राचाहिने औजार:
छालामा प्वाल पार्ने पन्च
घन6
6
Troubleshooting
Troubleshooting
Cartridge belt troubleshooting.
Flow
Loading...
7
7
History and honest limits
History and honest limits
From "How to Make a Cartridge Belt" by Robert Pound, Lavina, Mont., in **The Boy Mechanic, Book 2**, Popular Mechanics, 1915 (Project Gutenberg 44585; checked on the archive.org scan boymechanicbook200chic2, p. 55). He gives no slit length and no cartridge size; the slit spacing follows whatever cartridge the belt is for. The tools and metric figures are ours.
सामग्री
3- 2 टुक्राप्लेसहोल्डर
- 1 टुक्राप्लेसहोल्डर
- 1 टुक्राप्लेसहोल्डर
यो खाकाले बनाउँछ
सम्बन्धित ब्लुप्रिन्ट
यी ब्लुप्रिन्टहरूले ज्ञान साझा गर्छन् — प्रविधि, सामग्री वा सिद्धान्त
CC0 सार्वजनिक डोमेन
यो ब्लुप्रिन्ट CC0 अन्तर्गत जारी गरिएको छ। तपाईं अनुमति नसोधी प्रतिलिपि, परिमार्जन, वितरण र प्रयोग गर्न सक्नुहुन्छ।
ब्लुप्रिन्ट मार्फत उत्पादनहरू किनेर सिर्जनाकर्तालाई सहयोग गर्नुहोस् सिर्जनाकर्ता कमिसन विक्रेताले तोकेको, वा यो ब्लुप्रिन्टको नयाँ संस्करण बनाउनुहोस् र आम्दानी बाँड्न आफ्नो ब्लुप्रिन्टमा जडानको रूपमा समावेश गर्नुहोस्।

