सहयोग
कला
सुन्दरता र कल्याण
हस्तकला
संस्कृति र इतिहास
मनोरञ्जन
वातावरण
खाना र पेय
रिभर्स इन्जिनियरिङ
विज्ञान
खेलकुद
प्रविधि
पहिर्न मिल्ने

Jointed Fishing Rods: Two- and Three-Piece Casting, Trout and Bass Fly, Salt-Water and Tarpon Rods (Boy Mechanic, 1915)
Part II of Stillman Taylor's rod-making series (The Boy Mechanic, Book 2, 1915): once the one-piece casting rod is mastered, the same planing, grasp and finishing methods make jointed rods. He gives full caliper tables and fitting lists for six rods; choose one in the notebook. Sections join with welted, shouldered ferrules, and every rod gets two tips "in view of a possible breakage".
उन्नत
About 2-3 weeks (glue and varnish drying)
निर्देशनहरू
1
1
His caliper tables
His caliper tables
Jupyter नोटबुक लोड हुँदैछ…
2
2
Read The Boy Mechanic, Book 2
Read The Boy Mechanic, Book 2
"While the action of the one-piece rod is undeniably better than when the rod is made in two or three pieces, it is less compact to carry." He warns that "the more joints incorporated in a rod, the less satisfactory it will be from an angling standpoint", since ferrules cannot follow the rod's curve.
3
3
Choose the rod and get the stock
Choose the rod and get the stock
Pick a rod from the notebook. Stock (dagame or greenheart): two-piece casting -- butt 5/8 in x 3 ft, two tips 3/8 in x 3 ft; three-piece casting -- all 2 ft, butt 5/8 in, joint and tips 3/8 in; trout or bass fly -- butt 5/8 in x 4 ft, joint and tips 3/8 in x 4 ft; salt-water -- both 4 ft, butt 3/4 in, tip 1/2 in; tarpon -- one piece 1 in x 6-1/2 ft.
यस चरणका सामग्री:
डागामे काठ4 टुक्राचाहिने औजार:
हाते आरा
नाप्ने फित्ता4
4
Plane each section to its table
Plane each section to its table
Plane, round and scrape each section exactly as for the one-piece rod, calipering at every station in the table. Two-piece casting rod: he first suggests a butt of about 23 in and a 32-1/2 in tip to fit a 35 in rod case, then specifies a 6-1/2 oz rod with a 32-1/2 in butt (15/32 in at the grasp to 19/64 in at the ferrule) and a 33 in tip (17/64 in to 7/64 in), equal when ferrule and top are on. Make two tips for each rod.
यस चरणका सामग्री:
गिट्टी कागज1 टुक्राचाहिने औजार:
रन्दा
ब्लक रन्दा
फलामको खुर्पने पाता
रेती (हातको रेती)
भर्नियर क्यालिपर5
5
Fit the ferrules
Fit the ferrules
Fit a welted, shouldered ferrule at each joint, sized from his list: 17/64 in for the two-piece casting rod; 21/64 in and 15/64 in for the three-piece; 9/32 in and 11/64 in for the fly rods; 7/16 in for the salt-water rod; a 3/4 in male ferrule on the tarpon butt. The tip ferrule comes with two closed-end centres, one for each tip. Cement them on with ferrule cement; serrated (toothed) ferrule ends are wound with silk for strength.
यस चरणका सामग्री:
डन्डीको फेरुल2 टुक्रा
फेरुल सिमेन्ट1 टुक्रा
डन्डी बेर्ने रेसम1 टुक्राचाहिने औजार:
रेती (हातको रेती)
प्रोपेन टर्च
भर्नियर क्यालिपर6
6
Build the grasp and reel seat
Build the grasp and reel seat
Build the cork grasp and reel seat as for the one-piece rod: 3/4 in reel seat with straight hood for the casting rods (fly-rod type with butt cap on the fly rods, 9 in or 9-1/2 in of cork above it), 7/8 in on the salt-water rod with an 18 in double grasp, 1 in on the tarpon rod. Use a 1 in butt cap (1-1/8 in on the tarpon rod) and a taper (winding check) of the small-end size in his list. For an independent butt, fit the ferrule straight on a rounded dagame core so the seated ferrule does not touch the wood, cement and rivet it, fit a soft-pine sleeve over core and ferrule, glue it on, cement and rivet the reel seat, then glue on the corks and cut the core flush.
यस चरणका सामग्री:
कर्कका औंठी24 टुक्रा
पशु सरेस1 टुक्रा
सल्लाको फल्याक1 टुक्रा
रिल सिट1 टुक्रा
डन्डीको फेदको टोपी1 टुक्रा
वाइन्डिङ चेक1 टुक्रा
फेरुल सिमेन्ट1 टुक्रा
तामाका रिभेट1 टुक्राचाहिने औजार:
हस्तकलाको चक्कु
हाते ड्रिल
ब्लक रन्दा
प्रोपेन टर्च
घन7
7
Mount the guides and tops
Mount the guides and tops
Casting rods: two 1/2 in narrow agate guides, two No. 1 one-ring casting guides and two 3/32 in offset agate tops. Fly rods: two No. 4 snake guides on the butt joint, three No. 3 on the middle joint, three No. 2 on each tip, and two No. 7 agate angle fly tops of the wind-on kind. Salt-water rod: a 10/32 in stirrup-tube agate top and two No. 3 bell guides. Tarpon rod: two No. 11 wide raised agate guides, two No. 1 trumpet guides and a 3/8 in agate stirrup top; whip its guides on double, the first set 10 in from the top, the second 26 in from the reel. Whip with 00 silk (00 or 0 on the three-piece rod, size A on the salt-water and tarpon rods), using the invisible knot.
यस चरणका सामग्री:
डन्डीको धागो-गाइड8 टुक्रा
डन्डीको टुप्पोको गाइड2 टुक्रा
डन्डी बेर्ने रेसम1 टुक्रा
मौरीको मैन1 टुक्राचाहिने औजार:
रेती (हातको रेती)
हस्तकलाको चक्कु8
8
Shellac and varnish
Shellac and varnish
Shellac the windings and varnish the rod with coach varnish as for the one-piece rod: thin coats, warm, three days between coats.
यस चरणका सामग्री:
सेलाकको वार्निस1 टुक्रा
कोच वार्निस3 टुक्राचाहिने औजार:
चौडा रङ्गाउने बुरुस9
9
Troubleshooting
Troubleshooting
Jointed rod troubleshooting.
Flow
Loading...
10
10
History and honest limits
History and honest limits
From "Fishing-Rod Making and Angling, Part II" by Stillman Taylor, in **The Boy Mechanic, Book 2**, Popular Mechanics, 1915 (Project Gutenberg 44585; checked on the archive.org scan boymechanicbook200chic2, pp. 69-72). Two points are given as he wrote them: the two-piece casting rod's butt is about 23 in in one sentence and 32-1/2 in in the next; the three-piece rod's stock is "2 ft. long" while its finished sections are 21-1/2, 21-3/4 and 21 in. Guide counts in the list are for the fly rods, the largest set. The tools and metric figures are ours.
सामग्री
17- 4 टुक्राप्लेसहोल्डर
- 1 टुक्राप्लेसहोल्डर
- 2 टुक्राप्लेसहोल्डर
- 2 टुक्राप्लेसहोल्डर
- 2 टुक्राप्लेसहोल्डर
- 24 टुक्राप्लेसहोल्डर
- 1 टुक्राप्लेसहोल्डर
- 1 टुक्राप्लेसहोल्डर
- 1 टुक्राप्लेसहोल्डर
- 1 टुक्राप्लेसहोल्डर
- 1 टुक्राप्लेसहोल्डर
- 1 टुक्राप्लेसहोल्डर
- 8 टुक्राप्लेसहोल्डर
- 2 टुक्राप्लेसहोल्डर
- 1 टुक्राप्लेसहोल्डर
- 1 टुक्राप्लेसहोल्डर
- 3 टुक्राप्लेसहोल्डर
आवश्यक उपकरणहरू
12- प्लेसहोल्डर
- 1 vendor sell this, none ship to you yetप्लेसहोल्डर
- प्लेसहोल्डर
- प्लेसहोल्डर
- प्लेसहोल्डर
- प्लेसहोल्डर
- प्लेसहोल्डर
- प्लेसहोल्डर
- प्लेसहोल्डर
- प्लेसहोल्डर
- प्लेसहोल्डर
- प्लेसहोल्डर
यो खाकाले बनाउँछ
सम्बन्धित ब्लुप्रिन्ट
यी ब्लुप्रिन्टहरूले ज्ञान साझा गर्छन् — प्रविधि, सामग्री वा सिद्धान्त
CC0 सार्वजनिक डोमेन
यो ब्लुप्रिन्ट CC0 अन्तर्गत जारी गरिएको छ। तपाईं अनुमति नसोधी प्रतिलिपि, परिमार्जन, वितरण र प्रयोग गर्न सक्नुहुन्छ।
ब्लुप्रिन्ट मार्फत उत्पादनहरू किनेर सिर्जनाकर्तालाई सहयोग गर्नुहोस् सिर्जनाकर्ता कमिसन विक्रेताले तोकेको, वा यो ब्लुप्रिन्टको नयाँ संस्करण बनाउनुहोस् र आम्दानी बाँड्न आफ्नो ब्लुप्रिन्टमा जडानको रूपमा समावेश गर्नुहोस्।

