सहयोग
कला
सुन्दरता र कल्याण
हस्तकला
संस्कृति र इतिहास
मनोरञ्जन
वातावरण
खाना र पेय
रिभर्स इन्जिनियरिङ
विज्ञान
खेलकुद
प्रविधि
पहिर्न मिल्ने

Wooden Skates: Twin Hardwood Runners Under a Strapped Board (Boy Mechanic, 1915)
F. E. Kennar's wooden skates from The Boy Mechanic, Book 2 (1915), made "to take the place of the usual steel-runner kind" and to prevent sprained ankles: two hardwood runners nailed under a 4 in board, held apart by blocks and bolts, with corner pieces to locate the shoe and straps to hold it. Make two alike.
शुरुआती
About 3 hours
निर्देशनहरू
1
1
His sizes in centimetres
His sizes in centimetres
Jupyter नोटबुक लोड हुँदैछ…
2
2
Read The Boy Mechanic, Book 2
Read The Boy Mechanic, Book 2
"Skates that will take the place of the usual steel-runner kind and which will prevent spraining of the ankles, can be made of a few pieces of 1/2-in. hardwood boards."
3
3
Cut the runners
Cut the runners
From 1/2 in hardwood, cut four runners 2 in wide at the back and 1-1/2 in wide at the front, each 2 in longer than the shoe. Shape the front ends as in his figure.
यस चरणका सामग्री:
कडा काठको फल्याक1 टुक्राचाहिने औजार:
हाते आरा
वक्र काट्ने आरा
रन्दा
सिसाकलम
नाप्ने फित्ता4
4
Assemble each skate
Assemble each skate
Nail the top edges of a pair of runners to the underside of a board 4 in wide, at its edges. Fasten a block 2 in wide between the runners at the rear and one 1 in wide in front. Bore the runners and put two bolts through, one just behind the front block and one in front of the rear block.
यस चरणका सामग्री:
कडा काठको फल्याक1 टुक्रा
काँटी1 टुक्रा
गोलो टाउको भएको बोल्ट2 टुक्राचाहिने औजार:
हाते आरा
घन
हाते ड्रिल5
5
Fit the corner pieces and straps
Fit the corner pieces and straps
Fasten four triangular pieces on top, one at each corner, so the heel and toe of the shoe fit between them; if you like, nail a crosspiece in front of the heel. Attach straps to the sides to fasten the skate to the shoe. Make the second skate the same.
यस चरणका सामग्री:
कडा काठको फल्याक1 टुक्रा
काँटी1 टुक्रा
छालाको फित्ता2 टुक्राचाहिने औजार:
हाते आरा
घन
हाते ड्रिल6
6
Troubleshooting
Troubleshooting
Wooden skate troubleshooting.
Flow
Loading...
7
7
History and honest limits
History and honest limits
From "Skates Made of Wood" by F. E. Kennar, in **The Boy Mechanic, Book 2**, Popular Mechanics, 1915 (Project Gutenberg 44585; checked on the archive.org scan boymechanicbook200chic2, p. 30). The scan says hardwood boards; the Gutenberg text drops "hardwood". He gives no sizes for the bolts, straps or corner pieces. The tools and metric figures are ours.
सामग्री
4- 1 टुक्राप्लेसहोल्डर
- 2 टुक्राप्लेसहोल्डर
- 2 टुक्राप्लेसहोल्डर
- 2 टुक्राप्लेसहोल्डर
यो खाकाले बनाउँछ
सम्बन्धित ब्लुप्रिन्ट
यी ब्लुप्रिन्टहरूले ज्ञान साझा गर्छन् — प्रविधि, सामग्री वा सिद्धान्त
CC0 सार्वजनिक डोमेन
यो ब्लुप्रिन्ट CC0 अन्तर्गत जारी गरिएको छ। तपाईं अनुमति नसोधी प्रतिलिपि, परिमार्जन, वितरण र प्रयोग गर्न सक्नुहुन्छ।
ब्लुप्रिन्ट मार्फत उत्पादनहरू किनेर सिर्जनाकर्तालाई सहयोग गर्नुहोस् सिर्जनाकर्ता कमिसन विक्रेताले तोकेको, वा यो ब्लुप्रिन्टको नयाँ संस्करण बनाउनुहोस् र आम्दानी बाँड्न आफ्नो ब्लुप्रिन्टमा जडानको रूपमा समावेश गर्नुहोस्।


