सुन्दरता र कल्याण

संस्कृति र इतिहास

रिभर्स इन्जिनियरिङ

पहिर्न मिल्ने

Industry 3.0 — Assembly Line & Mass Production (1913)

२११ ब्लुप्रिन्टहरू उपलब्ध

ब्लुप्रिन्टहरू (२११)

Charlie द्वारा

$Rubber Squeeze Bulb: Latex Coagulated Inside a Split Mould Coated with Calcium Nitrate (Szegvari, Anode, US 1,949,502)$

Charlie द्वारा

Charlie द्वारा

Charlie द्वारा

Charlie द्वारा

Charlie द्वारा

Charlie द्वारा

Charlie द्वारा

Charlie द्वारा

Charlie द्वारा

Charlie द्वारा

Charlie द्वारा

Charlie द्वारा

Charlie द्वारा

Charlie द्वारा

Charlie द्वारा

इलेक्ट्रोनिक्स

इलेक्ट्रोनिक्स

इलेक्ट्रोनिक्स

इलेक्ट्रोनिक्स

इलेक्ट्रोनिक्स

इलेक्ट्रोनिक्स

इलेक्ट्रोनिक्स

इलेक्ट्रोनिक्स

211 मध्ये 24 देखाइँदै

Industry 3.0 — Assembly Line & Mass Production (1913)

ब्लुप्रिन्टहरू (२११)

Phosphor Bronze Wire: Cast Billet Extruded at 570-620 °C, then Cold Drawn without Annealing (Barthel, Lurgi, US 2,079,239)

Rubber Squeeze Bulb: Latex Coagulated Inside a Split Mould Coated with Calcium Nitrate (Szegvari, Anode, US 1,949,502)

Acrylic Pellets: Methyl Methacrylate Stirred into Beads in Gelatine Water at 75 °C (Crawford & McGrath, ICI, US 2,108,044)

Activated Alumina: Aluminium Trihydrate Heated at 350 °C While Hot Air Carries the Steam Away (Derr, Alcoa, US 2,015,593)

Cobalt Molybdate Catalyst: Acid-Washed Alumina Impregnated to 6.5 % Molybdenum and 0.8 % Cobalt, Pelleted (Hoog, Shell, US 2,608,521)

Regular Gasoline, Research Octane 95.7: Cracked Gasoline, Reformate, Polymer, Iso-hexanes and Hydro-treated Gasoline with 2.7 cc Lead (Gulf, US 3,071,535)

Hydro-treated Gasoline: Cracked Light Gas Oil and Isoheptanes Desulphurised with Hydrogen over Cobalt Molybdate at 700 °F (Gulf, US 3,071,535)

Iso-hexanes and Isopentane: Light Straight-Run Gasoline Isomerised over Platinum-Alumina with Hydrogen (Gulf, US 3,071,535)

Polymer Gasoline: Propylene from Cracked Gas Polymerised over Phosphoric Acid (Gulf, US 3,071,535)

Silica-Alumina Cracking Catalyst, 85 % Silica and 15 % Alumina: Water Glass Gelled with Acid, Alumina Precipitated on It (Thomas & Ahlberg, UOP, US 2,285,314)

Coker Gas Oil and Petroleum Coke: Vacuum Residue Delayed-Coked at about 920 °F (Gulf, US 3,071,535)

Heavy Gas Oil: the 620-1,050 °F Cut from Atmospheric and Vacuum Distillation of Crude Oil (Gulf, US 3,071,535)

FCC Gasoline: Gas Oil Cracked over Fluidised Silica-Alumina at 975 °F, 71.5 % Conversion (Gulf, US 3,071,535)

Premium Gasoline, Research Octane 102.7: Alkylate, Reformate, Light Cracked Gasoline and Isopentane with 2.7 cc Lead (Gulf, US 3,071,535)

Tetraethyl Lead: Steam-Distilled from the Reaction Mass in Water Brought to pH 7.5 with Dilute Sulphuric Acid (Bake & Parmelee, du Pont, US 2,038,703)

Tetraethyl Lead Reaction Mass: Lead-Sodium Alloy Activated with Aluminium Chloride, Treated with Ethyl Chloride at 35-90 °C (Calcott, du Pont, US 1,962,173)

Fired Silver Paint: Five Parts Silver Oxide to One Part Lead Borate, Ground in Oil (NBS Circular 468, 1947)

Fired Silver Paint: Five Parts Silver to One Part Lead Borate, Ground in Oil (NBS Circular 468, 1947)

Silver Conductive Paint: Silver Powder in Methacrylate Resin and Acetone, Dried at 25-75 °C (NBS Circular 468, 1947)

Silver Conductive Paint: Silver Powder in Polystyrene and Benzene, Dried at 25-75 °C (NBS Circular 468, 1947)

Fired Silver Paint: Precipitated Silver and Flux in Polyvinyl Alcohol with Ammonia (Gray, Erie Resistor 1954, Ex. 1)

Fired Silver Paint: Silver Oxide and Flux in Purified Dextrin and Water (Gray, Erie Resistor 1954, Ex. 3)

Fired Silver Paint: Silver Oxide Paint with Silver Nitrate Added Just Before Use (Gray, Erie Resistor 1954, Ex. 5)

Fired Silver Paint: Silver Oxide and Flux in Polyvinyl Alcohol and Water (Gray, Erie Resistor 1954, Ex. 2)