सहयोग
कला
सुन्दरता र कल्याण
हस्तकला
संस्कृति र इतिहास
मनोरञ्जन
वातावरण
खाना र पेय
रिभर्स इन्जिनियरिङ
विज्ञान
खेलकुद
प्रविधि
पहिर्न मिल्ने

Clay Tool Set: Potter's Turning Tools, Turning Stick and Rib (Binns, The Potter's Craft, 1910)
The potter's set for turning (trimming) leather-hard pots on the wheel, as Binns taught it: soft steel tools the potter bends and files to shape, a turning stick and upright board to steady the hand, and wooden ribs cut to the shape of the inside of a pot.
Result: a set of turning tools, a turning stick and board, and ribs.
Source: C. F. Binns, The Potter's Craft (1910), pp. 86-88 and 179. Unknown: the tool sizes. Picture: Fig. 19 of the book.
शुरुआती
Unknown
निर्देशनहरू
1
1
Bend and file the turning tools
Bend and file the turning tools
Make the turning tools of soft steel strip: bend each near its end and file the edge to suit. Make broad tools filed to a curve, for finishing concave surfaces; one or two narrow tools with a curved edge, which cut faster; and a small square tool. Keep the filing at its own bench so steel dust does not get into the clay. Ours: mild steel flat bar. Not given: the strip sizes.
यस चरणका सामग्री:
नरम इस्पातको चेप्टो पाटो1 turning toolsचाहिने औजार:
फलाम काट्ने आरा
घन
निहुँ
धातुको रेती2
2
Make the board and turning stick
Make the board and turning stick
Cut a soft pine board 8 or 10 inches wide and 2 feet high, to stand upright at the back of the wheel frame opposite the potter, screwed on or set in a socket so it can be removed. Make the turning stick from a broomstick with a sharpened nail in its end; its point presses into the board at any height and the hand holding the tool rests on it, like a painter's mahl-stick. Ours: a wooden dowel for the broomstick.
यस चरणका सामग्री:
सल्लाको फल्याक1 board support
काठको किल्ला1 turning stick
फलामका काँटी1 stick pointचाहिने औजार:
फलाम काट्ने आरा
धातुको रेती
घन3
3
Cut the ribs
Cut the ribs
Cut a piece of wood, called a rib, to the exact shape of the inside of the pot to be made; it smooths the inside while the wheel turns. Make one for each shape. Ours: hardwood.
यस चरणका सामग्री:
कडा काठको पाटो1 ribsचाहिने औजार:
फलाम काट्ने आरा
धातुको रेतीसामग्री
5- 1 turning toolsप्लेसहोल्डर
- 1 board supportप्लेसहोल्डर
- 1 turning stickप्लेसहोल्डर
- 1 stick pointप्लेसहोल्डर
- 1 ribsप्लेसहोल्डर
जोडिएका खाकाका सामग्री

10% एट्रिब्युसन
Mild Steel Bar Stock Forged from an Ingot
Forge द्वारा
आधुनिक
४६
०
०
०
५
०

10% एट्रिब्युसन
Pine Boards with a Chainsaw Mill
Woody द्वारा
काठको काम
४७
०
०
०
१
०

10% एट्रिब्युसन
Riven Hardwood Dowels with a Dowel Plate
Woody द्वारा
काठको काम
५९
०
०
०
१
०

10% एट्रिब्युसन
Forging Iron Nails by Hand — Drawing, Cutting, and Heading
Forge द्वारा
नङ
६३
०
०
०
३
०
यो खाकाले बनाउँछ
CC0 सार्वजनिक डोमेन
यो ब्लुप्रिन्ट CC0 अन्तर्गत जारी गरिएको छ। तपाईं अनुमति नसोधी प्रतिलिपि, परिमार्जन, वितरण र प्रयोग गर्न सक्नुहुन्छ।
ब्लुप्रिन्ट मार्फत उत्पादनहरू किनेर सिर्जनाकर्तालाई सहयोग गर्नुहोस् सिर्जनाकर्ता कमिसन विक्रेताले तोकेको, वा यो ब्लुप्रिन्टको नयाँ संस्करण बनाउनुहोस् र आम्दानी बाँड्न आफ्नो ब्लुप्रिन्टमा जडानको रूपमा समावेश गर्नुहोस्।
