सहयोग
कला
सुन्दरता र कल्याण
हस्तकला
संस्कृति र इतिहास
मनोरञ्जन
वातावरण
खाना र पेय
रिभर्स इन्जिनियरिङ
विज्ञान
खेलकुद
प्रविधि
पहिर्न मिल्ने

Plough Coupling Strap: Cross-Strap With Buckled Billets for a Pair of Horses (Hasluck, Harness Making, 1904)
When two horses plough side by side, a coupling strap ties them together so they keep level. This is the coupling from Paul N. Hasluck's Harness Making (1904): a 1 in strap 28 in to 30 in long with a buckled billet at each end, buckled from the mouth of one horse to the other. Every size is his; the picture is our diagram.
शुरुआती
About 2 hours
निर्देशनहरू
1
1
His sizes in centimetres
His sizes in centimetres
Jupyter नोटबुक लोड हुँदैछ…
2
2
Read Harness Making, ch. IX
Read Harness Making, ch. IX
"Couplings are also a necessary part of plough gear. In some localities only cross-straps are employed from mouth to mouth when ploughing in pairs."
3
3
Cut the strap
Cut the strap
Cut the strap 1 in wide and 28 in to 30 in long. Turn it in about 1 in at each end, make a hole for the buckle, and shave the points.
यस चरणका सामग्री:
हार्नेसको छाला1 टुक्राचाहिने औजार:
छाला काट्ने छुरी
छालामा प्वाल पार्ने पन्च
नाप्ने फित्ता4
4
Make the billets
Make the billets
Cut two billets the same width, 1 ft long; trim them to a point at one end and shave the other. Edge them and crease them (the book prints "edge back, and crease them", probably for "edge, black").
यस चरणका सामग्री:
हार्नेसको छाला1 टुक्रा
छालाको रङ1 टुक्राचाहिने औजार:
छाला काट्ने छुरी
किनारा च्याम्फर गर्ने औजार
खोप पार्ने औजार
प्रोपेन टर्च5
5
Put it together
Put it together
Put the buckle in, then the thin end of the billet 2 in down at the back of the buckle. Put a loop between the chape by the buckle, and stitch one billet and buckle at each end. Punch two holes in each billet.
यस चरणका सामग्री:
जिब्रो भएको फलामे बकल2 टुक्रा
हार्नेसको छाला1 टुक्रा
छालाको धागो1 टुक्रा
मौरीको मैन1 टुक्राचाहिने औजार:
लुप स्टिक
आर (छेड्ने सियो)
दुई काठी सिलाउने सियो
छाला सिलाइ च्याप्ने काठ
छालामा प्वाल पार्ने पन्च6
6
Crossing couplings for a pair
Crossing couplings for a pair
Sometimes two coupling straps are used for a pair, crossing each other from the hames of each horse to the mouth of the other. Make them the same way but longer: 38 in, each with 12 in billets. Some are made a foot longer and cut in two, one end 15 in long with a buckle and loop and the other made to buckle on, with many holes. Then the coupling can be shortened on a young horse's side, to keep it back until it has learned the ordinary working pace.
यस चरणका सामग्री:
हार्नेसको छाला1 टुक्रा
जिब्रो भएको फलामे बकल4 टुक्रा
छालाको धागो1 टुक्रा
मौरीको मैन1 टुक्राचाहिने औजार:
छाला काट्ने छुरी
लुप स्टिक
आर (छेड्ने सियो)
दुई काठी सिलाउने सियो
छालामा प्वाल पार्ने पन्च
नाप्ने फित्ता7
7
Troubleshooting
Troubleshooting
Coupling strap troubleshooting.
Flow
Loading...
8
8
History and honest limits
History and honest limits
From **Harness Making**, edited by Paul N. Hasluck, Cassell, 1904 (Project Gutenberg 70169), chapter IX, "Plough Harness", couplings, pp. 110-111; every figure was checked on the archive.org scan (harnessmaking00hasl). He gives no buckle size; a 1 in buckle suits the 1 in strap. The picture is our diagram from his text. The tools and metric figures are ours.
सामग्री
5- 4 टुक्राप्लेसहोल्डर
- 1 टुक्राप्लेसहोल्डर
- 4 टुक्राप्लेसहोल्डर
- 2 टुक्राप्लेसहोल्डर
- 2 टुक्राप्लेसहोल्डर
आवश्यक उपकरणहरू
10- प्लेसहोल्डर
- प्लेसहोल्डर
- 1 vendor sell this, none ship to you yetप्लेसहोल्डर
- प्लेसहोल्डर
- प्लेसहोल्डर
- प्लेसहोल्डर
- प्लेसहोल्डर
- प्लेसहोल्डर
- प्लेसहोल्डर
- प्लेसहोल्डर
यो खाकाले बनाउँछ
सम्बन्धित ब्लुप्रिन्ट
यी ब्लुप्रिन्टहरूले ज्ञान साझा गर्छन् — प्रविधि, सामग्री वा सिद्धान्त
CC0 सार्वजनिक डोमेन
यो ब्लुप्रिन्ट CC0 अन्तर्गत जारी गरिएको छ। तपाईं अनुमति नसोधी प्रतिलिपि, परिमार्जन, वितरण र प्रयोग गर्न सक्नुहुन्छ।
ब्लुप्रिन्ट मार्फत उत्पादनहरू किनेर सिर्जनाकर्तालाई सहयोग गर्नुहोस् सिर्जनाकर्ता कमिसन विक्रेताले तोकेको, वा यो ब्लुप्रिन्टको नयाँ संस्करण बनाउनुहोस् र आम्दानी बाँड्न आफ्नो ब्लुप्रिन्टमा जडानको रूपमा समावेश गर्नुहोस्।


