सहयोग
कला
सुन्दरता र कल्याण
हस्तकला
संस्कृति र इतिहास
मनोरञ्जन
वातावरण
खाना र पेय
रिभर्स इन्जिनियरिङ
विज्ञान
खेलकुद
प्रविधि
पहिर्न मिल्ने
Keyway Broaching: Tooth Pitch, Rise per Tooth, Rake and Clearance by Metal and Hardness, Pushing Force
Forge

सिर्जनाकर्ता

Forge

19. नोभेम्बर 2026NO
३
०
०
०
०

Keyway Broaching: Tooth Pitch, Rise per Tooth, Rake and Clearance by Metal and Hardness, Pushing Force

Cut a keyway in a bore with a keyway broach in an arbor press, and work out the broach criteria for your metal: tooth pitch and teeth in contact, rise per tooth and the number of teeth, rake and clearance by material and hardness, and the pushing force. Rules from Machinery's Handbook (1924), Hammond (1921), the US Navy and Metcut (1980).
मध्यम
About 1 hour per part

निर्देशनहरू

1

How a keyway broach cuts

The broach slides through a slotted bushing in the bore. Each tooth stands a little higher than the one before (the rise), so each takes a thin chip and the keyway deepens tooth by tooth; the last teeth are the finished size and only clean up. Shims behind the broach set the depth for the next pass. Our animation; the rise is exaggerated.
चरण 1 - Image 1
2

Tooth pitch and teeth in contact

Jupyter नोटबुक लोड हुँदैछ…
3

Rise per tooth by metal

Jupyter नोटबुक लोड हुँदैछ…
4

Rake and clearance by hardness

Jupyter नोटबुक लोड हुँदैछ…
5

Pushing force (estimate)

Jupyter नोटबुक लोड हुँदैछ…
6

Check the work hardness

Test the hub. Metcut's angles are by Brinell. For steel Hammond wants scleroscope 32-40: softer tears, harder "will rapidly destroy the broaches". He gives no Brinell or Rockwell figure; convert with a standard table (ASTM E140) if you test in Rockwell.

चाहिने औजार:

रकवेल कडापन परीक्षकरकवेल कडापन परीक्षक
7

Bore and bushing

The bore must be to size: the broach's pilot should enter freely but not let the broach drop past the first tooth. Fit the bushing snug in the bore, slot where the keyway goes.

यस चरणका सामग्री:

बोर गरिएको हब ब्लाङ्कबोर गरिएको हब ब्लाङ्क1 टुक्रा

चाहिने औजार:

किवे ब्रोच गाइड बुसिङकिवे ब्रोच गाइड बुसिङ
भर्नियर क्यालिपरभर्नियर क्यालिपर
8

Set up in the press

Set hub, bushing and broach square under the arbor press, rigid and true. Oil the broach: broaching oil is best; lard or soluble oil will help.

चाहिने औजार:

आर्बर प्रेसआर्बर प्रेस
किवे ब्रोचकिवे ब्रोच
काट्ने तेलकाट्ने तेल
9

Push it through

Push with slow, even pressure. Never bring the broach back up through the hole: push it on through and catch it on a soft cushion.

चाहिने औजार:

आर्बर प्रेसआर्बर प्रेस
सुतीको कपडासुतीको कपडा
10

Shim and repeat

Put the next shim behind the broach to set the next depth, oil, and push through again. Repeat until the keyway is deep enough.

चाहिने औजार:

ब्रोच सिमब्रोच सिम
काट्ने तेलकाट्ने तेल
11

Measure the keyway

Check the width and the depth from the opposite side of the bore.

चाहिने औजार:

भर्नियर क्यालिपरभर्नियर क्यालिपर
माइक्रोमिटरमाइक्रोमिटर
12

Troubleshooting

Broaching problems and fixes.

Flow

Loading...
13

Sources and honest limits

*Machinery's Handbook* 6th ed. (1924) pp. 1135-1137 (first printed in Jones, *Broaching*, 1914); Hammond, *Broaching Practice* (1921) pp. 6, 7, 44; US Navy, *Machinery Repairman 3 & 2* (1990) p. 3-24; Metcut, *Machining Data Handbook* 3rd ed. (1980) Table 15.16 and pp. 17-8 to 17-20, © Metcut, cited. Not in any source we could read: cutting speed by hardness (Hammond gives 5-6 ft/min for 1921 carbon-steel broaches) and a Brinell or Rockwell limit. The force formula is our derivation. Ours: the animation, the example sizes.

सामग्री

1

आवश्यक उपकरणहरू

9

सम्बन्धित ब्लुप्रिन्ट

यी ब्लुप्रिन्टहरूले ज्ञान साझा गर्छन् — प्रविधि, सामग्री वा सिद्धान्त

CC0 सार्वजनिक डोमेन

यो ब्लुप्रिन्ट CC0 अन्तर्गत जारी गरिएको छ। तपाईं अनुमति नसोधी प्रतिलिपि, परिमार्जन, वितरण र प्रयोग गर्न सक्नुहुन्छ।

ब्लुप्रिन्ट मार्फत उत्पादनहरू किनेर सिर्जनाकर्तालाई सहयोग गर्नुहोस् सिर्जनाकर्ता कमिसन विक्रेताले तोकेको, वा यो ब्लुप्रिन्टको नयाँ संस्करण बनाउनुहोस् र आम्दानी बाँड्न आफ्नो ब्लुप्रिन्टमा जडानको रूपमा समावेश गर्नुहोस्।

छलफल

(0)

लग इन छलफलमा सामेल हुन

टिप्पणीहरू लोड गर्दै...