Making a Sound-Triggered LilyPad Patch
Sew a patch that plays sounds when you touch it. The LilyPad MP3 is a tiny music player — it reads MP3 files from a memory card and plays them through a speaker when you touch conductive-fabric pads wired to its trigger inputs. Make a talking toy, a musical costume, or a sound-effects badge.
निर्देशनहरू
Load the sounds onto a memory card
Load the sounds onto a memory card
Copy your MP3 files onto a microSD card and name each so it BEGINS with its trigger number 1–5 — for example 1-chime.mp3 plays on trigger 1, 2-bark.mp3 on trigger 2. Slide the card into the LilyPad MP3's card slot.
यस चरणका सामग्री:
LilyPad MP31 टुक्रा
Kingston Flash Memory - 8GB microSD1 टुक्राSew the touch pads and speaker
Sew the touch pads and speaker
Sew the LilyPad MP3 onto felt. Stitch a conductive-thread pad out to each trigger tab (T1–T5) and one more pad to a - (ground) tab. Connect the flexible speaker to the board's audio output. Keep the trigger pads from touching each other or the ground pad.
यस चरणका सामग्री:
Flexible Speaker and Amplifier - 13x18cm1 टुक्रा
Conductive Thread - 60g (Stainless Steel)1 रील
हातले सिलाउने सियो1 प्याक
ऊनी नम्दाको पाता1 पानाPower it with a LiPo
Power it with a LiPo
Plug a 3.7 V LiPo battery into the LilyPad MP3's JST connector and switch it on. The board recharges the same battery whenever it's plugged into USB, so it stays wearable.
यस चरणका सामग्री:
LiPo Battery 3.7V 1000mAh (JST Connector)1 टुक्राTouch to play
Touch to play
Touch a trigger pad and the ground pad at the same time — your finger bridges them and the matching sound plays through the speaker. Each pad plays its own file.
Customize
Customize
Swap the MP3 files on the card for your own sounds any time. For playlists, volume control or sound-plus-light effects, reprogram the board in the Arduino IDE with the SparkFun LilyPad MP3 library.
सामग्री
7- LilyPad MP310% कमिसन1 टुक्रा$42.33
- Kingston Flash Memory - 8GB microSD10% कमिसन1 टुक्रा$13.15
- 1 टुक्रा$31.30
- 1 रील$39.78
- 1 प्याकप्लेसहोल्डर
- 1 पानाप्लेसहोल्डर
- 1 टुक्रा$9.50
आवश्यक उपकरणहरू
1- प्लेसहोल्डर
सम्बन्धित ब्लुप्रिन्ट
यी ब्लुप्रिन्टहरूले ज्ञान साझा गर्छन् — प्रविधि, सामग्री वा सिद्धान्त
CC0 सार्वजनिक डोमेन
यो ब्लुप्रिन्ट CC0 अन्तर्गत जारी गरिएको छ। तपाईं अनुमति नसोधी प्रतिलिपि, परिमार्जन, वितरण र प्रयोग गर्न सक्नुहुन्छ।
ब्लुप्रिन्ट मार्फत उत्पादनहरू किनेर सिर्जनाकर्तालाई सहयोग गर्नुहोस् सिर्जनाकर्ता कमिसन विक्रेताले तोकेको, वा यो ब्लुप्रिन्टको नयाँ संस्करण बनाउनुहोस् र आम्दानी बाँड्न आफ्नो ब्लुप्रिन्टमा जडानको रूपमा समावेश गर्नुहोस्।