सहयोग
कला
सुन्दरता र कल्याण
हस्तकला
संस्कृति र इतिहास
मनोरञ्जन
वातावरण
खाना र पेय
रिभर्स इन्जिनियरिङ
विज्ञान
खेलकुद
प्रविधि
पहिर्न मिल्ने

Pit-Sawing Square Timber and Battens from a Log (Moxon, 1678)
How sawyers and joiners in Moxon's day ripped a log into squares, quarters and battens: lines struck with a chalked string, the log wedged over a saw-pit or on high trestles and plumbed true, and a framed pit-saw worked by a top-man and a pit-man, with wedges in the kerf to keep it open.
मध्यम
A day per log (two people)
निर्देशनहरू
1
1
Setting off a scantling
Setting off a scantling
Jupyter नोटबुक लोड हुँदैछ…
2
2
Read Mechanick Exercises
Read Mechanick Exercises
"If they would take any Square, Quarter, or Batten, &c. off, they first set off their Scantlin."
3
3
Set off the size
Set off the size
Open the compasses to the size you want plus the saw's kerf (e.g. 70 mm + kerf for a 70 x 70 mm square) and prick that distance from one side at both ends of the log. Set off exactly the size and the piece comes out half a kerf thinner.
यस चरणका सामग्री:
नरम काठका मुढा1 टुक्राचाहिने औजार:
दुई टुप्पे कम्पास
नाप्ने फित्ता4
4
Line the stuff
Line the stuff
Chalk a line hard, hold it on the pricks at both ends, strain it stiff, lift the middle straight up and let it snap down to leave a chalk line. Mark the underside the same way. Working alone, hook the line on a compass point or a nail at one end.
चाहिने औजार:
खरीको रेखा-डोरी
दुई टुप्पे कम्पास5
5
Set up over the pit
Set up over the pit
Wedge the log fast over a saw-pit, or on two strong trestles a little more than man-high with four spreading legs. Plumb the side the lines were set from so it hangs exactly upright, or the piece will be thicker at top or bottom.
चाहिने औजार:
काठका डण्डा
साहुल6
6
Saw
Saw
Enter the pit-saw at one end: the top-man on the log guides it exactly in the line and draws it a little towards him on the down stroke; the pit-man below pulls straight down with all his strength, not so far that the handles drop out of reach. On the up stroke bear the teeth off the wood. When the sawn pieces pinch the blade, drive a wedge into the kerf, as far as you dare without splitting it.
चाहिने औजार:
खाल्डे आरा (दुई जनाको लामो आरा)
काठका डण्डा
काठको मुङ्ग्रो7
7
Square and batten
Square and batten
Turn the log and line and saw the other faces the same way to get squares (70 x 70 mm here) and thinner battens.
चाहिने औजार:
खाल्डे आरा (दुई जनाको लामो आरा)
खरीको रेखा-डोरी
दुई टुप्पे कम्पास8
8
Troubleshooting
Troubleshooting
Pit-sawing troubleshooting.
Flow
Loading...
9
9
History and honest limits
History and honest limits
From Joseph Moxon, **Mechanick Exercises**, Numb. V, Joinery (1678), §27, pp. 96-98, and Plate 4 M (checked on the archive.org scan mechanickexercis00moxo). Softwood, the 70 mm size and the kerf figure are ours.
सामग्री
1- 1 टुक्राप्लेसहोल्डर
CC0 सार्वजनिक डोमेन
यो ब्लुप्रिन्ट CC0 अन्तर्गत जारी गरिएको छ। तपाईं अनुमति नसोधी प्रतिलिपि, परिमार्जन, वितरण र प्रयोग गर्न सक्नुहुन्छ।
ब्लुप्रिन्ट मार्फत उत्पादनहरू किनेर सिर्जनाकर्तालाई सहयोग गर्नुहोस् सिर्जनाकर्ता कमिसन विक्रेताले तोकेको, वा यो ब्लुप्रिन्टको नयाँ संस्करण बनाउनुहोस् र आम्दानी बाँड्न आफ्नो ब्लुप्रिन्टमा जडानको रूपमा समावेश गर्नुहोस्।

