सहयोग
कला
सुन्दरता र कल्याण
हस्तकला
संस्कृति र इतिहास
मनोरञ्जन
वातावरण
खाना र पेय
रिभर्स इन्जिनियरिङ
विज्ञान
खेलकुद
प्रविधि
पहिर्न मिल्ने
Rack-and-Pinion Router With a Zero-Set Knob: Two Knobs on One Hollow Pinion, Set to Zero on the Work (Rees, 1969)
Forge

सिर्जनाकर्ता

Forge

13. नोभेम्बर 2026NO
७
०
०
०
०

Rack-and-Pinion Router With a Zero-Set Knob: Two Knobs on One Hollow Pinion, Set to Zero on the Work (Rees, 1969)

Spencer C. Rees of Pickens, South Carolina, received US 3,466,973, dated 16 September 1969, for The Singer Company. A rack screwed to the motor housing is moved by a pinion through a window in a box on the base. The pinion is a hollow shaft running in one bore through the box's two side lugs, with a knob at each end. One knob turns it. The other, a zero-set knob with graduations, slips on its sleeve against an O-ring, so it can be set to zero with the bit touching the work. One screw through the middle holds it all together. Only the pinion shaft was metal; the rest was moulded. We print every part in PETG round a small DC motor. The sizes are ours.
उन्नत
About 3 days

निर्देशनहरू

1

What one turn of the knob does

Jupyter नोटबुक लोड हुँदैछ…
2

Read US 3,466,973

"The zero-set knob 40 has a reduced diameter portion 51 which carries circumferentially-spaced graduation marks 52 on its surface." "In the above-described structure it will be noted that the only metallic part required is the pinion shaft 37 which is a relatively simple two-diameter piece."
3

Print the base

The base 10: the split ring with clamp lugs, the box 28 for the rack with its two lugs 50 and stepped bore 33, the window 36, two legs 11 down to the plate 12 with its aperture, and two handle arms. Print it plate down. PETG, 0.2 mm layers, 40 % infill, 5 walls.
डिजाइन फाइलSTLCC0 - Free
4

Print the motor housing

The housing 19: a tube for a 42 mm motor, 56 mm outside, a ledge with an 18 mm hole and two M4 holes, and two M3 holes for the rack. Print it ledge down. PETG, 0.2 mm layers, 40 % infill, 5 walls.
डिजाइन फाइलSTLCC0 - Free
5

Print the small parts

One plate: the rack 29 (module 1.5), the hollow pinion shaft 37 with its toothed (splined) part, bearing part and end ribs, the adjusting knob 38 with grooves, the flanged sleeve 39, the zero-set knob 40 with 20 graduations and an O-ring groove, and the cover plate 53 with its window 55 and mark 56. PETG, 0.2 mm layers, 40 % infill, 5 walls.
डिजाइन फाइलSTLCC0 - Free
6

Motor in the housing

Fit the collet adapter on the motor's shaft, stand the motor in the housing on its ledge and screw it down with two M4 screws; wire it through a toggle switch to the DC supply. Screw the rack to the housing's front with two M3 screws.

यस चरणका सामग्री:

PETG फिलामेन्टPETG फिलामेन्ट1 टुक्रा
विद्युत मोटरविद्युत मोटर1 टुक्रा
मोटर साफ्ट कोलेट एडाप्टरमोटर साफ्ट कोलेट एडाप्टर1 टुक्रा
छपत्रे खोपिल्टाको बेलनाकार टाउको भएको स्क्रुछपत्रे खोपिल्टाको बेलनाकार टाउको भएको स्क्रु2 टुक्रा
मेसिन स्क्रुमेसिन स्क्रु2 टुक्रा
टगल स्विचटगल स्विच1 टुक्रा
हुक-अप तारहुक-अप तार1 टुक्रा
ताप-सङ्कुचन नलीताप-सङ्कुचन नली1 टुक्रा

चाहिने औजार:

फिलामेन्ट चल्ने 3D प्रिन्टर (FDM)फिलामेन्ट चल्ने 3D प्रिन्टर (FDM)
दिष्ट धाराको विद्युत् स्रोतदिष्ट धाराको विद्युत् स्रोत
बिजुली सोल्डरिङ आइरनबिजुली सोल्डरिङ आइरन
एलेन चाबी सेटएलेन चाबी सेट
स्क्रुड्राइभर सेटस्क्रुड्राइभर सेट
धार सफा गर्ने औजारधार सफा गर्ने औजार
7

Base and handles

Turn two hardwood handles 17 and bolt one to each arm with an M8 bolt. Slide the housing into the base with the rack in the box's channel, and put an M5 screw with a wing nut through the clamp lugs.

यस चरणका सामग्री:

कडा काठको फल्याककडा काठको फल्याक1 टुक्रा
षट्कोणीय बोल्ट सङ्ग्रहषट्कोणीय बोल्ट सङ्ग्रह2 टुक्रा
छपत्रे नटछपत्रे नट3 टुक्रा
छपत्रे खोपिल्टाको बेलनाकार टाउको भएको स्क्रुछपत्रे खोपिल्टाको बेलनाकार टाउको भएको स्क्रु1 टुक्रा
पखेटे नटपखेटे नट1 टुक्रा

चाहिने औजार:

काठको खरादकाठको खराद
तारविनाको ड्रिलतारविनाको ड्रिल
ड्रिल टुप्पाको सेटड्रिल टुप्पाको सेट
मिलाउन मिल्ने पानामिलाउन मिल्ने पाना
8

Pinion, knobs and cover

Push the pinion shaft through the box's bore from the right, its toothed part through the window meshing with the rack, its bearing part in the right lug. Fit the O-ring in the zero-set knob's groove, push the sleeve into the knob, and slide them onto the shaft's toothed end from the left, the sleeve in the left lug. Fit the adjusting knob on the right end, its grooves on the shaft's ribs. Pass a long M4 screw through knob, shaft and sleeve with a washer, into a nut in the sleeve, and tighten it until the knobs have only a little end play. Screw the cover over the box with two M3 screws.

यस चरणका सामग्री:

ओ-रिङओ-रिङ1 टुक्रा
छपत्रे खोपिल्टाको बेलनाकार टाउको भएको स्क्रुछपत्रे खोपिल्टाको बेलनाकार टाउको भएको स्क्रु1 टुक्रा
चेप्टो वासरचेप्टो वासर1 टुक्रा
छपत्रे नटछपत्रे नट1 टुक्रा
मेसिन स्क्रुमेसिन स्क्रु2 टुक्रा

चाहिने औजार:

एलेन चाबी सेटएलेन चाबी सेट
स्क्रुड्राइभर सेटस्क्रुड्राइभर सेट
9

Set zero and rout

Fit a bit. Loosen the clamp, turn the adjusting knob until the bit's tip touches the work, then turn the zero-set knob alone until its zero lines up with the cover's mark. Turn the adjusting knob to the depth wanted, read off the graduations, and clamp. Rout with both hands on the handles.

चाहिने औजार:

राउटर बिट सेटराउटर बिट सेट
कडा काठको फल्याककडा काठको फल्याक
बार क्ल्याम्पबार क्ल्याम्प
डिजिटल क्यालिपर ६ इन्चडिजिटल क्यालिपर ६ इन्च
सुरक्षा चस्मासुरक्षा चस्मा
10

Troubleshooting

Rack and pinion router troubleshooting.

Flow

Loading...
11

History and honest limits

**Spencer C. Rees** of Pickens, South Carolina, assignor to The Singer Company, US 3,466,973, dated 16 September 1969, filed 8 January 1968. He claimed a rack on the motor housing, "a pair of lugs formed on the base in fixed spaced relation on opposite sides of the rack and having aligned cylindrical apertures", a hollow pinion shaft, an adjusting knob, a flanged sleeve, "a zero-set knob frictionally coupled to said sleeve", and "single fastening means" through them all. His pinion shaft was metal and the rest moulded; ours is all printed. His motor ran on mains; ours is a small DC motor. He gives no sizes; every size here is ours.

सामग्री

14

आवश्यक उपकरणहरू

15

डिजाइन फाइलहरू

3

यो खाकाले बनाउँछ

CC0 सार्वजनिक डोमेन

यो ब्लुप्रिन्ट CC0 अन्तर्गत जारी गरिएको छ। तपाईं अनुमति नसोधी प्रतिलिपि, परिमार्जन, वितरण र प्रयोग गर्न सक्नुहुन्छ।

ब्लुप्रिन्ट मार्फत उत्पादनहरू किनेर सिर्जनाकर्तालाई सहयोग गर्नुहोस् सिर्जनाकर्ता कमिसन विक्रेताले तोकेको, वा यो ब्लुप्रिन्टको नयाँ संस्करण बनाउनुहोस् र आम्दानी बाँड्न आफ्नो ब्लुप्रिन्टमा जडानको रूपमा समावेश गर्नुहोस्।

छलफल

(0)

लग इन छलफलमा सामेल हुन

टिप्पणीहरू लोड गर्दै...