कला
सुन्दरता र कल्याण
हस्तकला
संस्कृति र इतिहास
मनोरञ्जन
वातावरण
खाना र पेय
रिभर्स इन्जिनियरिङ
विज्ञान
खेलकुद
प्रविधि
पहिर्न मिल्ने
The Parking Meter: A Coin That Unlocks a Clock
Martin

सिर्जनाकर्ता

Martin

27. सेप्टेम्बर 2026NO
९
०
०
०
०

The Parking Meter: A Coin That Unlocks a Clock

By the 1930s city streets were lined with cars parked all day, and shops lost the customers who could not stop. A parking meter rations the kerb: a coin buys a set time, and a signal shows anyone passing when it has run out. Carl C. Magee of Oklahoma City, assignor to the Dual Parking Meter Company, filed US 2,118,318, *Coin Controlled Parking Meter*, on 13 May 1935; it was granted 24 May 1938. Inside a lockable head on a post, a coin completes the winding mechanism; turning the handle winds a spring; an escapement-governed train runs it down; a signal shows while the time lasts and vanishes when it has elapsed. The last coin shows in a window, and the coins fall into a sealed container so the collections can be checked. Oklahoma City installed Magee's meters in July 1935. This rung designs the gear train and the spring for a one-hour meter and builds a coin-interlocked timer from a wind-up motor.
मध्यम
About 5 hours

निर्देशनहरू

1

Gear ratio and spring energy

Jupyter नोटबुक लोड हुँदैछ…
2

One parking, as the patent describes it

Blockly कार्यक्षेत्र

Loading Blockly workspace...

3

What keeps the time

The meter's clockwork is governed by an escapement. The embedded blueprint shows how an escapement releases a gear train one tooth at a time.
4

Build a coin-interlocked timer

Take a wind-up motor mechanism and fit a pointer to its slowest output shaft; mark the run-down time of a full wind on a card dial behind it. Make the winding key the interlock, as Magee's coin was. 3D-print a crank that drives the winding shaft through a sliding coupling: two halves with a slot between them exactly as wide as the coin. Without a coin the outer half turns freely; drop a coin into the slot and it locks the halves together, so the crank winds the spring. Put a ramp below so that when the crank has turned half a revolution the coin falls out of the slot into a box. Try it without a coin: the crank spins, nothing winds. With a coin: one wind, the pointer runs down across its dial. Time a full run and compare with the card.

यस चरणका सामग्री:

चाबी भर्ने मोटरको यन्त्रचाबी भर्ने मोटरको यन्त्र1 टुक्रा
तामाको सिक्कातामाको सिक्का3 टुक्रा
प्लाइउडको पाताप्लाइउडको पाता1 टुक्रा
मेसिन स्क्रुमेसिन स्क्रु6 टुक्रा
कडा काठका किलाकडा काठका किला1 टुक्रा

चाहिने औजार:

फिलामेन्ट चल्ने 3D प्रिन्टर (FDM)फिलामेन्ट चल्ने 3D प्रिन्टर (FDM)
PETG फिलामेन्टPETG फिलामेन्ट
तारविनाको ड्रिलतारविनाको ड्रिल
ड्रिल टुप्पाको सेटड्रिल टुप्पाको सेट
डिजिटल क्यालिपर ६ इन्चडिजिटल क्यालिपर ६ इन्च
रोकघडीरोकघडी
5

A meter that takes the coin but gives no time

Coin-operated timer faults.

Flow

Loading...
6

History and honest limits

**Carl C. Magee** of Oklahoma City filed **US 2,118,318** on 13 May 1935, assigned to the Dual Parking Meter Company; granted 24 May 1938. Oklahoma City installed 150 of his meters along 14 blocks downtown in July 1935, charging five cents an hour; within a few years they spread to cities across the United States and abroad. **Honest limits.** The notebook's beat rate, train losses and spring figures are illustrative, not Magee's. The printed interlock accepts anything the size of the coin — real meters gauge a coin's diameter, thickness and sometimes its metal.

सामग्री

5

आवश्यक उपकरणहरू

6

CC0 सार्वजनिक डोमेन

यो ब्लुप्रिन्ट CC0 अन्तर्गत जारी गरिएको छ। तपाईं अनुमति नसोधी प्रतिलिपि, परिमार्जन, वितरण र प्रयोग गर्न सक्नुहुन्छ।

ब्लुप्रिन्ट मार्फत उत्पादनहरू किनेर सिर्जनाकर्तालाई सहयोग गर्नुहोस् सिर्जनाकर्ता कमिसन विक्रेताले तोकेको, वा यो ब्लुप्रिन्टको नयाँ संस्करण बनाउनुहोस् र आम्दानी बाँड्न आफ्नो ब्लुप्रिन्टमा जडानको रूपमा समावेश गर्नुहोस्।

छलफल

(0)

लग इन छलफलमा सामेल हुन

टिप्पणीहरू लोड गर्दै...