सहयोग
कला
सुन्दरता र कल्याण
हस्तकला
संस्कृति र इतिहास
मनोरञ्जन
वातावरण
खाना र पेय
रिभर्स इन्जिनियरिङ
विज्ञान
खेलकुद
प्रविधि
पहिर्न मिल्ने
Tinplate and Galvanized Steel Sheet from Coil
Emma

सिर्जनाकर्ता

Emma

11. अक्टोबर 2026SE
२५
०
०
५
०

Tinplate and Galvanized Steel Sheet from Coil

Thin steel rusts, so most sheet is coated in continuous lines that run a coil through at speed. Tinplate, the material of food cans, is cold-reduced steel strip about 0.15–0.55 mm thick electroplated with a thin layer of tin, around 1–11 g per square metre; the strip is then heated just past tin's melting point so the coating flows bright, and passivated and oiled. Galvanized sheet is strip run through a bath of molten zinc, the same coating as batch galvanizing done continuously; excess zinc is wiped off as the strip rises, setting the coating thickness.
उन्नत
Continuous (industrial)

निर्देशनहरू

1

Clean the strip

The cold-rolled coil is uncoiled into a moving strip and cleaned so the coating will bond.

यस चरणका सामग्री:

इस्पात कोइलइस्पात कोइल1000 केजी

चाहिने औजार:

निरन्तर लेपन लाइननिरन्तर लेपन लाइन
2

Tinplate: electroplate

The strip runs through plating cells that deposit a thin, controlled weight of tin on both sides: 1.1–11.2 g per square metre. Here 2.8 g a side on 0.2 mm strip, about 3.6 kg of tin per tonne.

यस चरणका सामग्री:

टिनको ढिक्काटिनको ढिक्का3.6 केजी

चाहिने औजार:

निरन्तर लेपन लाइननिरन्तर लेपन लाइन
3

Tinplate: reflow

The strip is heated just past tin's melting point so the matt coating flows bright, then quenched.

चाहिने औजार:

निरन्तर लेपन लाइननिरन्तर लेपन लाइन
4

Galvanized: zinc bath

The strip dips through molten zinc and rises out; excess zinc is wiped off to set the coating. Here Z275, 275 g per square metre counting both sides, on 1 mm strip: about 35 kg of zinc per tonne.

यस चरणका सामग्री:

जस्ताको सिल्लीजस्ताको सिल्ली35 केजी

चाहिने औजार:

निरन्तर लेपन लाइननिरन्तर लेपन लाइन
5

Finish and recoil

Tinplate is passivated and lightly oiled; the coated strip is recoiled or cut into sheets.

चाहिने औजार:

निरन्तर लेपन लाइननिरन्तर लेपन लाइन

सामग्री

3

आवश्यक उपकरणहरू

1

CC0 सार्वजनिक डोमेन

यो ब्लुप्रिन्ट CC0 अन्तर्गत जारी गरिएको छ। तपाईं अनुमति नसोधी प्रतिलिपि, परिमार्जन, वितरण र प्रयोग गर्न सक्नुहुन्छ।

ब्लुप्रिन्ट मार्फत उत्पादनहरू किनेर सिर्जनाकर्तालाई सहयोग गर्नुहोस् सिर्जनाकर्ता कमिसन विक्रेताले तोकेको, वा यो ब्लुप्रिन्टको नयाँ संस्करण बनाउनुहोस् र आम्दानी बाँड्न आफ्नो ब्लुप्रिन्टमा जडानको रूपमा समावेश गर्नुहोस्।

छलफल

(0)

लग इन छलफलमा सामेल हुन

टिप्पणीहरू लोड गर्दै...