कला
सुन्दरता र कल्याण
हस्तकला
संस्कृति र इतिहास
मनोरञ्जन
वातावरण
खाना र पेय
रिभर्स इन्जिनियरिङ
विज्ञान
खेलकुद
प्रविधि
पहिर्न मिल्ने
Tuyere Iron: a Slotted Grate Cast in Grey Iron
Forge

सिर्जनाकर्ता

Forge

18. अक्टोबर 2026NO
२२
०
०
०
०

Tuyere Iron: a Slotted Grate Cast in Grey Iron

The tuyere is the opening in the bottom of the forge fire through which the blast is blown. Bacon (1919): its openings must let the blast through easily while keeping cinders from dropping into the blast pipe, and there should be a way to open the pipe below and clear out the cinders that still get through. This one is a slotted grate over a socket for the blast pipe, cast in grey iron. The design and sizes are ours. The picture: our drawing.
उन्नत
2 days

निर्देशनहरू

1

Make the pattern

From pine, make a pattern of a square plate about 15 cm across and 2 cm thick with four or five narrow slots, and a short round socket under its centre to take the blast pipe. Taper every side slightly so it draws from the sand.

चाहिने औजार:

सल्लाको फल्याकसल्लाको फल्याक
वक्र काट्ने आरावक्र काट्ने आरा
काठका छिनोको सेटकाठका छिनोको सेट
काठको गोन्दकाठको गोन्द
डिजिटल क्यालिपर ६ इन्चडिजिटल क्यालिपर ६ इन्च
2

Ram the mould

Ram the pattern up in casting sand in the flask, draw it out, and cut a sprue and a runner to the cavity.

चाहिने औजार:

ढलाइको बालुवाढलाइको बालुवा
ढलाइको बाकसढलाइको बाकस
हाते खुर्पीहाते खुर्पी
3

Melt the iron

Melting pig iron in the cupola and tapping it into the ladle.
4

Pour

Pour the molten grey iron from the ladle into the sprue in one steady stream until the mould is full; about 4 kg with the sprue (our estimate). Let it cool in the sand.

यस चरणका सामग्री:

काँचो फलामका ढिक्काकाँचो फलामका ढिक्का4 केजी

चाहिने औजार:

ढलान गर्ने पन्युढलान गर्ने पन्यु
ढलाइको बाकसढलाइको बाकस
वेल्डिङका पन्जावेल्डिङका पन्जा
छालाको एप्रनछालाको एप्रन
अनुहार ढालअनुहार ढाल
5

Clean up

Shake out the casting, cut off the sprue, grind the fins and brush off the sand. Check that every slot is clear.

चाहिने औजार:

एङ्गल ग्राइन्डरएङ्गल ग्राइन्डर
तार ब्रसको सेटतार ब्रसको सेट
वेल्डिङका पन्जावेल्डिङका पन्जा
अनुहार ढालअनुहार ढाल
6

Set it in the forge

Set it in the hearth with the blast pipe in its socket and a way to open the pipe below for clearing cinders. Richardson's forge had its tuyere iron four inches below the hearth surface.

चाहिने औजार:

डिजिटल क्यालिपर ६ इन्चडिजिटल क्यालिपर ६ इन्च

सामग्री

1

आवश्यक उपकरणहरू

14

सम्बन्धित ब्लुप्रिन्ट

यी ब्लुप्रिन्टहरूले ज्ञान साझा गर्छन् — प्रविधि, सामग्री वा सिद्धान्त

CC0 सार्वजनिक डोमेन

यो ब्लुप्रिन्ट CC0 अन्तर्गत जारी गरिएको छ। तपाईं अनुमति नसोधी प्रतिलिपि, परिमार्जन, वितरण र प्रयोग गर्न सक्नुहुन्छ।

ब्लुप्रिन्ट मार्फत उत्पादनहरू किनेर सिर्जनाकर्तालाई सहयोग गर्नुहोस् सिर्जनाकर्ता कमिसन विक्रेताले तोकेको, वा यो ब्लुप्रिन्टको नयाँ संस्करण बनाउनुहोस् र आम्दानी बाँड्न आफ्नो ब्लुप्रिन्टमा जडानको रूपमा समावेश गर्नुहोस्।

छलफल

(0)

लग इन छलफलमा सामेल हुन

टिप्पणीहरू लोड गर्दै...